Difference between revisions of "AppSuite:OX Guard"

(Debian GNU/Linux 7.0)
(SUSE Linux Enterprise Server 11)
Line 76: Line 76:
Add the package repository using zypper if not already present:
Add the package repository using zypper if not already present:
  {{for loop||call=SUSERepo|pv=reponame|pc1n=path|pc1v=products|pc2n=susename|pc2v=SLES11|appsuite/stable/guard-backend}}
  {{for loop||call=SUSERepo|pv=reponame|pc1n=path|pc1v=products|pc2n=susename|pc2v=SLES11|pc3n=ldbaccount|pc3v=LDBUSER:LDBPASSWORD|appsuite/stable/guard-backend}}
  {{for loop||call=SUSERepo|pv=reponame|pc1n=path|pc1v=products|pc2n=susename|pc2v=SLES11|appsuite/stable/guard-ui}}
  {{for loop||call=SUSERepo|pv=reponame|pc1n=path|pc1v=products|pc2n=susename|pc2v=SLES11|pc3n=ldbaccount|pc3v=LDBUSER:LDBPASSWORD|appsuite/stable/guard-ui}}
and run
and run

Revision as of 12:01, 10 October 2014

OX Guard

OX Guard is a security solution that provides protection for email communications and files. Fully integrated with both OX as a Service and standard OX App Suite installations, it allows users to send and read encrypted messages and store and share encrypted files – and requires no additional setup or knowledge. OX Guard offers a simple way to increase security by limiting the opportunity for unauthorized access while data is en-route or in-storage, creating extra peace of mind.

This article will guide you through the installation of Guard and describes the basic configuration and software requirements. As it is intended as a quick walk-through it assumes an existing installation of the operating system including a single server App Suite setup as well as average system administration skills. This guide will also show you how to setup a basic installation with none of the typically used distributed environment settings. The objective of this guide is:

  • To setup a single server installation
  • To setup a single Guard instance on an existing Open-Xchange installation, no cluster
  • To use the database service on the existing Open-Xchange installation for Guard, no replication
  • To provide a basic configuration setup, no mailserver configuration

Key features

  • Simple security at the touch of a button
  • Provides user based security - Separate from provider
  • Supplementary security to Provider based security - Layered
  • Powerful features yet simple to use and understand
  • Security - Inside and outside of the OX environment
  • Email and Drive integration
  • Uses proven PGP security


If an OX App Suite customer would like to evaluate OX Guard integration, the first step is to contact OX Sales. OX Sales will then work on the request and send prices and license/API (for the hosted infrastructure) key details to the customer.


Please review following URL for remaining requirements

Please review OX Guard Requirements for a full list of requirements.

Since OX Guard is a Microservice it can either be added to an existing Open-Xchange installation or it can be deployed on a dedicated environment without having any of the other Open-Xchange App Suite core services installed. OX App Suite v7.6.0 or later is required to operate this extension both in a single or multi server environments.


  • Open-Xchange REST API
  • Grizzly HTTP connector (open-xchange-grizzly)
  • A supported Java Virtual Machine (Java 7)
  • An Open-Xchange App Suite installation v7.6.0 or later
  • Please Note: To get access to the latest minor features and bug fixes, you need to have a valid license. The article Updating OX-Packages explains how that can be done.

Please Note

OX Guard version 1.0 supports branding / theming using the configuration cascade, defining a templateID for a user or context. Additional details will be provided in customization documentation

Download and Installation


The installation of the open-xchange-rest package which is required for Guard will eventually execute database update tasks if installed and activated. Please take this into account.

Redhat Enterprise Linux 6 or CentOS 6

If not already done, add the following repositories to your Open-Xchange yum configuration:


[open-xchange-appsuite-stable-guard-ui] name=Open-Xchange-appsuite-stable-guard-ui baseurl=https://software.open-xchange.com/products/appsuite/stable/guard-ui/RHEL6/ gpgkey=https://software.open-xchange.com/oxbuildkey.pub enabled=1 gpgcheck=1 metadata_expire=0m

and run

$ yum update
$ yum install open-xchange-rest open-xchange-guard open-xchange-guard-ui open-xchange-guard-ui-static

Debian GNU/Linux 7.0

If not already done, add the following repositories to your Open-Xchange apt configuration:

deb https://LDBUSER:LDBPASSWORD@software.open-xchange.com/products/appsuite/stable/guard-backend/DebianWheezy /
deb https://LDBUSER:LDBPASSWORD@software.open-xchange.com/products/appsuite/stable/guard-ui/DebianWheezy /

and run

$ apt-get update
$ apt-get install open-xchange-rest open-xchange-guard open-xchange-guard-ui open-xchange-guard-ui-static

SUSE Linux Enterprise Server 11

Add the package repository using zypper if not already present:

$ zypper ar https://LDBUSER:LDBPASSWORD@software.open-xchange.com/products/appsuite/stable/guard-backend/SLES11 appsuite-stable-guard-backend
$ zypper ar https://LDBUSER:LDBPASSWORD@software.open-xchange.com/products/appsuite/stable/guard-ui/SLES11 appsuite-stable-guard-ui

and run

$ zypper ref
$ zypper in open-xchange-rest open-xchange-guard open-xchange-guard-ui open-xchange-guard-ui-static

Guard requires Java 1.7, which will be installed through the Guard packages, still SUSE Linux Enterprise Server 11 will not use Java 1.7 by default. Therefor we have to set Java 1.7 as the default instead of Java 1.6:

$ update-alternatives --config java

Now select the Java 1.7 JRE, example:

There are 2 alternatives which provide `java'.
  Selection    Alternative
*         1    /usr/lib64/jvm/jre-1.6.0-ibm/bin/java
 +        2    /usr/lib64/jvm/jre-1.7.0-ibm/bin/java

Press enter to keep the default[*], or type selection number: 2
Using '/usr/lib64/jvm/jre-1.7.0-ibm/bin/java' to provide 'java'.

Update OX Guard

Redhat Enterprise Linux 6 or CentOS 6

If not already done, add the following repositories to your Open-Xchange yum configuration:


[open-xchange-appsuite-7.6.0-guard-ui-updates] name=Open-Xchange-appsuite-7.6.0-guard-ui-updates baseurl=https://LDBUSER:LDBPASSWORD@software.open-xchange.com/products/appsuite/7.6.0/guard-ui/updates/RHEL6/ gpgkey=https://software.open-xchange.com/oxbuildkey.pub enabled=1 gpgcheck=1 metadata_expire=0m

and run

$ yum update
$ yum upgrade

After the new packages are installed, the guard process needs a restart:

$ /etc/init.d/open-xchange-guard restart

Debian GNU/Linux 7.0

If not already done, add the following repositories to your Open-Xchange apt configuration:

deb https://software.open-xchange.com/products/appsuite/7.6.0/guard-backend/updates/DebianWheezy /
deb https://software.open-xchange.com/products/appsuite/7.6.0/guard-ui/updates/DebianWheezy /

Then run

$ apt-get update
$ apt-get dist-upgrade

If you want to see, what apt-get is going to do without actually doing it, you can run:

$ apt-get dist-upgrade -s

After the new packages are installed, the guard process needs a restart:

$ /etc/init.d/open-xchange-guard restart

SUSE Linux Enterprise Server 11

Add the package repository using zypper if not already present:

$ zypper ar https://software.open-xchange.com/products/appsuite/7.6.0/guard-backend/updates/SLES11 appsuite-7.6.0-guard-backend-updates
$ zypper ar https://software.open-xchange.com/products/appsuite/7.6.0/guard-ui/updates/SLES11 appsuite-7.6.0-guard-ui-updates

and run

$ zypper dup -r appsuite-7.6.0-guard-backend-updates
$ zypper dup -r appsuite-7.6.0-guard-ui-updates

You might need to run

$ zypper ref

to update the repository metadata before running zypper up.

After the new packages are installed, the guard process needs a restart:

$ open-xchange-guard restart


The following gives an overview of the most important settings to enable Guard for users on the Open-Xchange installation. Some of those settings have to be modified in order to establish the database and REST API access from the Guard service. All settings relating to the Guard backend component are located in the configuration file guard.properties located in /opt/open-xchange/guard/etc. The default configuration should be sufficient for a basic "up-and-running" setup (with the exception of defining the database username and password). Please refer to the inline documentation of the configuration file for more advanced options.

$ vim /opt/open-xchange/guard/etc/guard.properties

Open-Xchange config_db host - Guard will establish a connection to the config_db


Guard database for storing user keys


Username and Password for the two databases above


Open-Xchange REST API host


External URL for this Open-Xchange installation. This setting will be used to generate the link to the secure content for external recipients


Configure services


Configure the mod_proxy_http module by adding the Guard API.

Redhat Enterprise Linux 6 or CentOS 6

$ vim /etc/httpd/conf.d/proxy_http.conf

Debian GNU/Linux 7.0 and SUSE Linux Enterprise Server 11

$ vim /etc/apache2/conf.d/proxy_http.conf
<Proxy balancer://oxguard>
       Order deny,allow
       Allow from all
BalancerMember http://localhost:8080/oxguard timeout=1800 smax=0 ttl=60 retry=60 loadfactor=100 route=OX1 ProxySet stickysession=JSESSIONID|jsessionid scolonpathdelim=ON SetEnv proxy-initial-not-pooled SetEnv proxy-sendchunked </Proxy>
ProxyPass /appsuite/api/oxguard balancer://oxguard

Please Note: The Guard API settings must be inserted before the existing “<Proxy /appsuite/api>” parameter.

After the configuration is done, restart the Apache webserver

$ apachectl restart


Please add the following settings to a new configuration file on the Open-Xchange backend servers:

$ vim /opt/open-xchange/etc/guard.properties
# OX GUard general permission, required to activate Guard in the AppSuite UI.

# Default theme template id for all users that have no custom template id configured.


Running SELinux prohibits your local Open-Xchange backend service to connect to localhost:8080, which is where the Guard backend service listens to. In order to allow localhost connections to 8080 execute the following:

$ setsebool -P httpd_can_network_connect 1

Initiating the Guard database and key store

Once the Guard configuration (database and backend configuration) and the service configuration has been applied, the Guard administration script needs to be executed in order to create the Guard databases. The administration script also takes care of the creation of the master keys and the master password file in /opt/open-xchange/guard. The initiation only needs to be done once for a multi server setup, for details please see “Optional / Clustering”.

/opt/open-xchange/guard/sbin/guard init

Please Note: It is important to understand that the master password file located at /opt/open-xchange/guard/oxguardpass is required to reset user passwords, without them the administrator will not be able to reset user passwords anymore in the future. The file contains the passwords used to encrypt the master database key, as well as passwords used to encrypt protected data in the users table.

Start Guard

The services have been configured and the database has been initiated, it's time to start Guard

$ /etc/init.d/open-xchange-guard start

Enabling Guard for Users

Guard provides two capabilities for users in the environment:

  • Guard Mail: com.openexchange.capability.guard:mail
  • Guard Drive: com.openexchange.capability.guard:drive

Each of those two Guard components is enabled for all users that have the according capability configured. Please note that users need to have the Drive permission set to use Guard Drive. So the users that have Guard Drive enabled must be a subset of those users with OX Drive permission. Since v7.6.0 we enforce this via the default configuration. Those capabilities can be activated for specific user by using the Open-Xchange provisioning scripts:

Guard Mail:

$ /opt/open-xchange/sbin/changeuser -c 1 -A oxadmin -P admin_password -u testuser --config/com.openexchange.capability.guard:mail=true

Guard Drive:

$ /opt/open-xchange/sbin/changeuser -c 1 -A oxadmin -P admin_password -u testuser --config/com.openexchange.capability.guard:drive=true

Please Note: Guard Drive requires Guard Mail to be configured for the user as well.


SSL Configuration

Per default the connection between the Guard backend and the configured Open-Xchange REST API host is unencrypted. Even though that Guard will never transmit unencrypted emails to or from the REST API you can optionally encrypt the whole communication between those two components by using SSL. To enforce Guard to use SSL in the communication between those two components enable the follwing configuration in Guard configuration file.

 $ vim /opt/open-xchange/guard/etc/guard.properties

The Guard backend is most commonly placed behind a load balancer (APACHE or other) and defaults to HTTP for incoming and outgoing traffic, using the load balancer to do SSL with the users. If you want Guard to use SSL for all communications, you need to set up the SSL key to use.

Please note that you have to provide access to the certificates.

com.openexchange.guard.useSSL: true
com.openexchange.guard.SSLPort: 8443
com.openexchange.guard.SSLKeyStore: //keystore location//
com.openexchange.guard.SSLKeyName: //alias name here//
com.openexchange.guard.SSLKeyPass: //ssl password//

Please Note: Enabling SSL might decrease performance and/or create more system load due to additional encoding of the HTTP streams.


You can run multiple OX Guard servers in your environment to ensure high availability or enhance scalability. OX Guard integrates seamlessly into the existing Open-Xchange infrastructure by using the existing interface standards and is therefor transparent to the environment. A couple of things have to be prepared in order to loosely couple OX Guard servers with Open-Xchange servers in a cluster.


The MySQL servers need to be configured in order to allow access to the configdb of Open-Xchange. To do so you need to set the following configuration in the MySQL my.cnf:

bind =

This allows the Guard backend to bind to the MySQL host which is configured in the guard.properties file with com.openexchange.guard.configdbHostname. After the bind for the MySQL instance is configured and the OX Guard backend would be able to connect to the configured host, you have to grant access for the OX Guard service on the MySQL instance to manage the databases. Do so by connecting to the MySQL server via the mysql client. Authenticate if necessary and execute the following, please note that you have to modify the hostname / IP address of the client who should be able to connect to this database, it should include all possible OX Guard servers:

GRANT ALL PRIVILEGES ON *.* TO 'openexchange'@'oxguard.example.com' IDENTIFIED BY ‘secret’;


OX Guard uses the Open-Xchange REST API to store and fetch data from the Open-Xchange databases. The REST API is a servlet running in the Grizzly container. By default it is not exposed as a servlet through Apache and is only accessibly via port 8009. In order to use Apache's load balancing via mod_proxy we need to add a servlet called "preliminary" to proxy_http.conf, example based on a clustered mod_proxy configuration:

<Location /preliminary>
     Order Deny,Allow
     Deny from all
     # Only allow access from Guard servers within the network. Do not expose this
     # location outside of your network. In case you use a load balancing service in front
     # of your Apache infrastructure you should make sure that access to /preliminary will
     # be blocked from the internet / outside clients. Examples:
     # Allow from
     # Allow from
     # Allow from 192.168.0.
     ProxyPass /preliminary balancer://oxcluster/preliminary

Make sure that the balancer is properly configured in the mod_proxy configuration. Examples on how to do so can be found in our clustering configuration for Open-Xchange AppSuite. Like explained in the example above, please make sure that this location is only available in your internal network, there is no need to expose /preliminary to the public, it is only used by Guard servers to connect to the OX backend. If you have a load balancer in front of the Apache cluster you should consider blocking access to /preliminary from WAN to restrict access to the servlet to internal network services only.

Now add the OX Guard BalancerMembers to the oxguard balancer configuration (also in proxy_http.conf) to address all your OX Guard nodes in the cluster in this balancer configuration. The configuration has to be applied to all Apache nodes within the cluster.

If the Apache server is a dedicated server / instance you also have to install the OX Guard UI-Static package on all Apache nodes in the cluster in order to provide static files like images or CSS to the OX Guard client. Example for Debian (the OX Guard repository has to be configured in the package management prior):

$ apt-get install open-xchange-guard-ui-static


Disable the Open-Xchange IPCheck for session verification. This is required because OX Guard will use the users session cookie to connect to the Open-Xchange REST API, but as a different IP address than the OX Guard server has been used during authentication the request would fail if you don't disable the IPCheck:

$ vim /opt/open-xchange/etc/server.properties

and set:


The OX Guard UI package has to be installed on all Open-Xchange backend nodes as well, example for Debian (the OX Guard repository has to be configured in the package management prior):

$ apt-get install open-xchange-guard-ui

Restart the Open-Xchange service afterwards.

OX Guard

After all the services like MySQL, Apache and Open-Xchange have been configured you need to update the OX Guard backend configuration to point to the correct API endpoints. Set the REST API endpoint to an Apache server by setting the following value in /opt/open-xchange/guard/etc/guard.properties:


Per default Guard will try to connect to port 8009 to this host, but as we configured the REST API to be proxies thorugh the serblet /preliminary on every Apache we now also need to change the target port for the REST API. You can do so by adding the following line into /opt/open-xchange/guard/etc/guard.properties:


Please also change all settings in regards to MySQL like com.openexchange.guard.configdbHostname, com.openexchange.guard.oxguardDatabaseHostname, com.openexchange.guard.databaseUsername or com.openexchange.guard.databasePassword. Afterwards restart the OX Guard service and check the logfile if the OX Guard backend is able to connect to the configured REST API.