You can choose between Galera or two-sided Master/Slave ("Master/Master") replication.
Galera database setup
OX supports the "Percona XtraDB Cluster 5.5" flavor of the Galera database and starting with OX 7.8.0 also version 5.6.x.
The following has been adjusted to work with Wheezy, but works similar with Squeeze, only the repo paths need adjustments.
To install the software, we first need to configure the repository and its build key, update our sources lists and install the packages:
gpg --keyserver hkp://keys.gnupg.net --recv-keys 1C4CBDCDCD2EFD2A gpg -a --export CD2EFD2A | apt-key add - cat >/etc/apt/sources.list.d/percona.list <<EOF deb http://repo.percona.com/apt wheezy main deb-src http://repo.percona.com/apt wheezy main EOF apt-get update apt-get install percona-xtradb-cluster-client-5.5 percona-xtradb-cluster-server-5.5 percona-xtrabackup
RHEL 6 systems
Should also apply to CentOS 6.
First, disable selinux, iptables, ip6tables. (Galera does not run with selinux. Using iptables and ip6tables should work if you configure it correctly, but documentation thereof is out of scope of this document.) Reboot.
Percona XtraDB Cluster relies on socat which is not shipped by RHEL. We need to install from a different source. The epel repository can be used for that.
yum install epel-release yum install socat
The installation command itself needs to be a composite remove, install command since yum is not clever enough to resolve the conflicts itself, so we need to tell it how.
wget http://www.percona.com/downloads/percona-release/percona-release-0.0-1.x86_64.rpm yum localinstall percona-release-0.0-1.x86_64.rpm
yum shell remove mysql-libs install Percona-XtraDB-Cluster-server-55 Percona-XtraDB-Cluster-client-55 run quit
Once this is all done, don't forget to run the update command to get the latest Percona packages.
Galera-specific MySQL configuration advise is included in our main (non-Galera-related) [My.cnf|MySQL configuration article]. Please consult that page for configuration information.
Whenever not all nodes of a Galera cluster are running (like before starting the cluster for the very first time), the first Galera node needs to get started with the wsrep_cluster_address parameter overridden to the value "gcomm://" in order to denote that the node shall not try to join an existing cluster (which would inevitably fail now, because no other cluster nodes are running yet), but to bootstrap the cluster instead. This override can most conveniently done on the command line, instead of editing to wsrep.cnf file to and fro.
So, for the first node, the startup command is
mysqld_safe --wsrep_cluster_address=gcomm:// &
You should then verify the Galera module is loaded properly using
mysql -e "show status like 'wsrep%';"
You should verify some settings like
| wsrep_local_state_comment | Synced | | wsrep_cluster_size | 1 | | wsrep_cluster_status | Primary | | wsrep_connected | ON | | wsrep_provider_name | Galera | | wsrep_provider_vendor | Codership Oy <email@example.com> | | wsrep_provider_version | 2.8(r162) | | wsrep_ready | ON |
Now you need to create the database user (we will use the same username and password as we defined in the previous section when setting up wsrep.cnf file) for the replication on this first node:
# create wsrep user: in mysql shell: CREATE USER 'wsrep'@'localhost' IDENTIFIED BY '5ojijmedUg8'; GRANT RELOAD, LOCK TABLES, REPLICATION CLIENT ON *.* TO 'wsrep'@'localhost'; FLUSH PRIVILEGES;
The Galera peers can then be started on the nodes 2 and 3 using
Since the standard service startup scripts cannot account for this special treatment, we recomment not to use them.
You can check the status of the Galera cluster using
mysql -e "show status like 'wsrep%';"
The output is lengthy. The most relevant fields are given as follows:
+----------------------------+----------------------------------------------------------------------+ | Variable_name | Value | +----------------------------+----------------------------------------------------------------------+ | wsrep_local_state_comment | Synced | | wsrep_incoming_addresses | <GALERA_NODE1_IP>:3306,<GALERA_NODE2_IP>:3306,<GALERA_NODE3_IP>:3306 | | wsrep_cluster_size | 3 | | wsrep_cluster_status | Primary | | wsrep_connected | ON | | wsrep_ready | ON | +----------------------------+----------------------------------------------------------------------+
The logs are helpful. Always.
Common mistakes are listed below.
If the Galera module does not get loaded at all:
- Configuration settings in my.cnf which are incompatible to Galera
- Wrong path of the shared object providing the Galera plugin in wsrep.cnf (wsrep_provider)
If the first node starts, but the second / third nodes can not be added to the cluster:
- User for the replication not created correctly on the first Galera node
Notes about configuring OX for use with Galera
Open-Xchange supports Galera as database backend only in the configuration where all writes are directed to one Galera node. For availability, it makes sense to not configure one Galera node's IP address directly, but rather employ some HA solution which offers active-passive functionality. Options therefore are discussed below.
Read requests can be directed to any node in the Galera cluster. Our standard approach is to recommend to use a loadbalancer to implement round-robin over all nodes in a Galera cluster for the read requests. But you can also chose to use a dedicated read node (the same node, or a different node, than the write node). Each of the approaches has its own advantages.
- Load balancer based setup: Read requests get distributed round-robin between the Galera nodes. Theoretically by distributing the load of the read requests, you benefit from lower latencies and more throughput. But this has never been benchmarked yet. For a discussion of available loadbalances, see next section. OX-wise, in this configuration, you have two alternatives:
- The Galera option wsrep_causal_reads=1 option enables you to configure OX with its replication monitor disabled (com.openexchange.database.replicationMonitor=false in configdb.properties). This is the setup which seems to perform best according to our experience as turning off the replication monitor reduces the commits on the DB and thus the write operations per second on the underlying storage significantly, which outweights the drawback from having higher commit latency due to fully synchronous mode.
- Alternatively, you can run Galera with wsrep_causal_reads=0 when switching on OX builtin replication monitor. This is also a valid setup.
- Use a designated floating IP for the read requests: This eliminates the need of a load balancer. With this option you will not gain any performance, but the quantitative benefit is unclear anyhow.
- Use the floating IP for the writes also for the reads: In this scenario, you direct all database queries only to one Galera node, and the other two nodes are only getting queries in case of a failure of that node. In this case, you can even use wsrep_causal_reads=0 while still having OX builtin replication monitor switched off. However we do not expect this option to be superior to the round-robin loadbalancer approach.
While the JDBC driver has some round-robin load balancing capabilities built-in, we don't recommend it for production use since it lacks possibilities to check the Galera nodes health states.
Loadbalancers used for OX -> Galera loadbalancing should be able to implement active-passive instances for the write requests, and active-active (round-robin) instances for the read requests. (If they cannot implement active-passive, you can still take a floating IP therefore.) Furthermore it is required to configure node health checks not only on the TCP level (by a simple connect), but to query the Galera health status periodically, evaluating Galera WSREP status variables. Otherwise split-brain scenarios or other bad states cannot be detected. For an example of such an health check, see the our documentation for setting up a software loadbalancer using keepalived (linked below).
Some customers use loadbalancing appliances. It is important to check that if the (virtual) infrastructure offers "loadbalancer" instances that they satisfy the given requirements. Often this is not the case. In particular, a simple "DNS round robin" approach is not viable.
If you want to create your own loadbalancers based on Linux, we usually recommend LVS (Linux Virtual Servers) controlled by Keepalived. LVS is a set of kernel modules implementing a L4 loadbalancer which performs quite well. Keepalived is a userspace daemon to control LVS rules, using health checks to reconfigure LVS rules if required. Keepalived / LVS requires one (or, for availability, two) dedicated linux nodes to run on. This can be a disadvantage for some installations, but usually, it pays off. Furthermore it has some requirements on the infrastructure, like being able to configure secondary IP addresses. This can be a show stopper for some (virtual / cloud) infrastructures. We gathered some configuration information on Keepalived here.
In case where the Keepalived based approach is not feasible due to its requirements on the infrastructure, it is also possible to use a HAproxy based solution where HAproxy processes run on each of the OX nodes, configured for one round-robin and one active/passive instance. OX is then connecting to the local HAproxy instances. It is vital to configure HAproxy timeouts different from the defaults, otherwise HAproxy will kill active DB connections, causing errors. One design flaw of that approach is that the different HAproxy instances do not speak to each other, so that it can happen that different instances have a different understanding of node health status, which could lead to situations violating the "one write node" requirement. Furthermore in large installations the number of HAproxy instances can get quite large. Some configuration hints for HAproxy are available here.
Creating Open-Xchange user
Now setup access for the Open-Xchange Server database user 'openexchange' to configdb and the oxdb for both groupware server addresses. These databases do not exist yet, but will be created during the Open-Xchange Server installation.
Note: The IPs in this example belong to the two different Open-Xchange Servers, please adjust them accordingly.
mysql> GRANT ALL PRIVILEGES ON *.* TO 'openexchange'@'10.20.30.213' IDENTIFIED BY 'secret'; mysql> GRANT ALL PRIVILEGES ON *.* TO 'openexchange'@'10.20.30.215' IDENTIFIED BY 'secret';