HTTP API: Difference between revisions

Revision as of 08:45, 15 July 2015

Introduction

This document defines the Open-Xchange HTTP API which is used by the new AJAX GUI. The first chapter describes general definitions and conventions which apply to all server modules. All other chapters describe individual server modules.

Low level protocol

The client accesses the server through HTTP GET, POST and PUT requests. HTTP cookies are used for authentication and must therefore be processed and sent back by the client as specified by RFC 6265. The HTTP API is accessible at URIs starting with /ajax. Each server module has a unique name and its own sub-namespace with that name below /ajax, e. g. all access to the module "tasks" is via URIs starting with /ajax/tasks.

Text encoding is always UTF-8. Data is sent from the server to the client as text/javascript and interpreted by the client to obtain an ECMAScript object. The HTTP API uses only a small subset of the ECMAScript syntax. This subset is roughly described by the following BNF:

Value   ::= "null" | Boolean | Number | String | Array | Object
Boolean ::= "true" | "false"
Number  ::= see NumericLiteral in ECMA 262 3rd edition
String  ::= \"([^"\n\\]|\\["\n\\])*\"
Array   ::= "[]" | "[" Value ("," Value)* "]"
Object  ::= "{}" | "{" Name ":" Value ("," Name ":" Value)* "}"
Name    ::= [A-Fa-f][0-9A-Fa-f_]*

Numbers are the standard signed integer and floating point numbers. Strings can contain any character, except double quotes, newlines and backslashes, which must be escaped by a backslash. Control characters in strings (other than newline) are not supported. Whitespace is allowed between any two tokens. See JSON and ECMA 262, 3^rd edition for the formal definition.

The response body consists of an object, which contains up to four fields as described in Response body. The field data contains the actual payload which is described in following chapters. The fields timestamp, error and error_params are present when data objects are returned, if an error occurred and if the error message contains conversion specifiers, respectively. Following sections describe the contents of these fields in more detail.

Response body

Name

Type

Value

data

Value

Payload of the response.

timestamp

Timestamp

The latest timestamp of the returned data (see Updates).

error

String

The translated error message. Present in case of errors.

error_params

Array

As o 7.4.2: Empty JSON array. Before that: Parameters for the error message that would need to be replaced in the error string (in a printf-format style).

error_id

String

Unique error identifier to help finding this error instance in the server logs.

error_desc

String

The technical error message (always English) useful for debugging the problem. Might be the same as error message if there is no more information available

code

String

Error code consisting of an upper-case module identifier and a four-digit message number, separated by a dash; e.g. "MSG-0012"

error_stack

Array

If configured (see "com.openexchange.ajax.response.includeStackTraceOnError" in 'server.properties') this field provides the stack trace of associated Java exception represented as a JSON array

Error handling

If the session of the user times out, if the client doesn't send a session ID or if the session for the specified session ID can not be found then the server returns the above described response object, that contains an error code and an error message. If the request URI or the request body is malformed or incomplete then the server returns the reponse object with an error message, too. In case of internal server errors, especially Java exceptions, or if the server is down, it returns the HTTP status code 503, Service Unavailable. Other severe errors may return other HTTP status values.

Application errors, which can be caused by a user and are therefore expected during the operation of the groupware, are reported by setting the field error in the returned object, as described in Response body. Since the error messages are translated by the client, they can not be composed of multiple variable parts. Instead, the error message can contain simplified printf()-style conversion specifications, which are replaced by elements from the array in the field error_params. If error_params is not present, no replacement occurs, even if parts of the error message match the syntax of a conversion specification.

A simplified conversion specification, as used for error messages, is either of the form %s or %n$s, where n is a 1-based decimal parameter index. The conversion specifications are replaced from left to right by elements from error_params, starting at the first element. %s is replaced by the current element and the current index is incremented. %n$s is replaced by the nth element and the current index is set to the (n + 1)th element.

Some error message contain data sizes which must be expressed in Bytes or Kilobytes etc., depending on the actual value. Since the unit must be translated, this conversion is performed by the client. Unfortunately, standard printf()-style formatting does not have a specifier for this kind of translation. Therefore, the conversion specification for sizes is the same as for normal strings, and the client has to determine which parameters to translate based on the error code. The current error codes and the corresponding size parameters are listed in Data size parameters

Data size parameters
Error code	Parameter indices
CON-0101	2, 3
FLS-0003	1, 2, 3
MSG-0065	1, 3
MSG-0066	1
NON-0005	1, 2

Date and time

Dates without time are transmitted as the number of milliseconds between 00:00 UTC on that date and 1970-01-01 00:00 UTC. Leap seconds are ignored, therefore this number is always an integer multiple of 8.64e7.

Because ECMAScript Date objects have no way to explicitly specify a timezone for calculations, timezone correction must be performed on the server. Dates with time are transmitted as the number of milliseconds since 1970-01-01 00:00 UTC (again, ignoring leap seconds) plus the offset between the user's timezone and UTC at the time in question. (See the Java method java.util.TimeZone.getOffset(long)). Unless optional URL parameter timezone is present. Then dates with time are transmitted as the number of milliseconds since 1970-01-01 00:00 UTC (again, ignoring leap seconds) plus the offset between the specified timezone and UTC at the time in question.

For some date and time values, especially timestamps, monotonicity is more important than the actual value. Such values are transmitted as the number of milliseconds since 1970-01-01 00:00 UTC, ignoring leap seconds and without timezone correction. If possible, a unique strictly monotonic increasing value should be used instead, as it avoids some race conditions described below.

This specification refers to these three interpretations of the type Number as separate data types. The types are described in Date and time types.

Date and time types
Type	Time	Timezone	Comment
Date	No	UTC	Date without time.
Time	Yes	User	Date and time.
Timestamp	Yes	UTC	Timestamp or unique sequence number.

Updates

To allow efficient synchronization of a client with changes made by other clients and to detect conflicts, the server stores a timestamp of the last modification for each object. Whenever the server transmits data objects to the client, the response object described in Response body includes the field timestamp. This field contains a timestamp value which is computed as the maximum of the timestamps of all transmitted objects.

When requesting updates to a previously retrieved set of objects, the client sends the last timestamp which belongs to that set of objects. The response contains all updates with timestamps greater than the one specified by the client. The field timestamp of the response contains the new maximum timestamp value.

If multiple different objects may have the same timestamp values, then a race condition exists when an update is processed between two such objects being modified. The first, already modified object will be included in the update response and its timestamp will be the maximum timestamp value sent in the timestamp field of the response. If the second object is modified later but gets the same timestamp, the client will never see the update to that object because the next update request from the client supplies the same timestamp value, but only modifications with greater timestamp values are returned.

If unique sequence numbers can't be used as timestamps, then the risk of the race condition can be at least minimized by storing timestamps in the most precise format and/or limiting update results to changes with timestamp values which are measurably smaller than the current timestamp value.

Editing

Editing objects is performed one object at a time. There may be multiple objects being edited by the same client simulataneously, but this is achieved by repeating the steps required for editing a single object. There is no batch edit or upload command.

To edit an object, a client first requests the entire object from the server. The server response contains the timestamp field described in the previous section. For in-place editing inside a view of multiple objects, where only already retrieved fields can be changed, retrieving the entire object is not necessary, and the last timestamp of the view is used as the timestamp of each object in it.

When sending the modified object back to the server, only modified fields need to be included in the sent object. The request also includes the timestamp of the edited object. The timestamp is used by the server to ensure that the object was not edited by another client in the meantime. If the current timestamp of the object is greater than the timestamp supplied by the client, then a conflict is detected and the field error is set in the response. Otherwise, the object gets a new timestamp and the response to the client is empty.

If the client displays the edited object in a view together with other objects, then the client will need to perform an update of that view immediately after successfully uploading an edited object.

File uploads

File uploads are made by sending a POST request that submits both the file and the needed fields as parts of a request of content-type “multipart/form-data” or “multipart/mixed”. The file metadata are stored in a form field “file” (much like an <input type=”file” name=”file” /> would do). In general a call that allows file uploads via POST will have a corresponding call using PUT to send object data. The JSON-encoded object-data that is send as the body of a corresponding PUT call is, when performed as a POST with file uploads, put into the request parameter “json”.

Since the upload is performed directly by the browser and is not an Ajax call, the normal callback mechanism for asynchronous Javascript calls cannot be used to obtain the result. For this reason the server responds to these POST calls with a complete HTML page that performs the callback and should not be displayed to the user. The HTML response is functionally equivalent to:

<!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.01//EN" "http://www.w3.org/TR/html4/strict.dtd">
<html>
    <head>
        <META http-equiv="Content-Type" content=\"text/html; charset=UTF-8\">
        <script type="text/javascript">
            (parent["callback_action"] || window.opener && window.opener["callback_action"])
            ({json})
        </script>
    </head>
</html>

The placeholders {json} is replaced by the response with the timestamp that would be expected from the corresponding PUT method. The placeholder action is replaced by the value of the parameter action of the request (except for the import bundle, which is named "import" instead of the action name for legacy purposes). The content-type of the answer is text/html.

Non-browser clients don't need to interpret HTML or JavaScript. The JSON data can be recognized by the outermost ({ and }), where the inner braces are part of the JSON value. For example, the regular expression $(\{.*\})$ captures the entire JSON value in its first capturing group.

Documentation conventions

The rest of this document describes all available requests for each module. A module usually supports several different requests, which are differentiated by the used HTTP method, URI path and supplied URI parameters. The description of each method generally contains the following elements:

the HTTP method followed by the request URI, inclusing the URI parameter action, which is used to differentiate methods,
a list of URI parameters which can or must be supplied by the client,
for PUT requests, content of the request body,
"Response with timestamp:"if the timestamp field is required in the response body or simply "Response:" if not,
content of the response payload, unless it is supposed to be empty.

Common object data

This table contains common fields which apply for any module's data type and is referenced throughout this document whenever a module's data type is described.

Common object data
ID	Name	Type	Value
1	id	String	Object ID
2	created_by	String	User ID of the user who created this object.
3	modified_by	String	User ID of the user who last modified this object.
4	creation_date	Time	Date and time of creation.
5	last_modified	Time	Date and time of the last modification.
20	folder_id	String	Object ID of the parent folder.
100	categories	String	String containing comma separated the categories. Order is preserved. Changing the order counts as modification of the object. Not present in folder objects.
101	private_flag	Boolean	Overrides folder permissions in shared private folders: When true, this object is not visible to anyone except the owner. Not present in folder objects.
102	color_label	Number	Color number used by Outlook to label the object. The assignment of colors to numbers is arbitrary and specified by the client. The numbers are integer numbers between 0 and 10 (inclusive). Not present in folder objects.
104	number_of_attachments	Number	Number of attachments
105	lastModifiedOfNewestAttachmentUTC	Time	Date and time of the newest attachment written with UTC time zone.

Module "login"

The login module is used to obtain a session from the user's login credentials. To understand the details of the different login methods, see the article titled "Login variations".

Login

POST /ajax/login?action=login

Parameters:

name – The login name.
password – The password.
authId (optional) – Identifier for tracing every single login request passed between different systems in a cluster. The value should be some token that is unique for every login request. This parameter must be given as URL parameter and not inside the body of the POST request.
client (optional) – Identifier of the client using the HTTP/JSON interface. This is for statistic evaluations what clients are used with Open-Xchange.
version (optional) – Used version of the HTTP/JSON interface client.
clientIP (optional) – IP address of the client host for that the session is created. If this parameter is not specified the IP address of the HTTP client doing this request is used.
clientUserAgent (optional) – Value of the User-Agent header of the client host for that the session is created. If this parameter is not specified the User-Agent of the current HTTP client doing this request is used.

Response: A JSON object containing the session ID used for all subsequent requests. Additionally a random token is contained to be used for the Easy Login method.

Form Login (since 6.20)

POST /ajax/login?action=formlogin

This request implements a possible login to the web frontend by only using a simple HTML form. An example for such a form can be found in the backend's documentation folder (/usr/share/doc/open-xchange-core) under examples/login.html.

Parameters:

login – The login name.
password – The password.
authId – Identifier for tracing every single login request passed between different systems in a cluster. The value should be some token that is unique for every login request. This parameter must be given as URL parameter and not inside the body of the POST request.
client – Identifier of the client using the HTTP/JSON interface. This is for statistic evaluations what clients are used with Open-Xchange. If the autologin request should work the client must be the same as the client sent by the UI in the normal login request.
version – Used version of the HTTP/JSON interface client.
autologin – True or false. True tells the UI to issue a store request for the session cookie. This store request is necessary if you want the autologin request not to fail.
uiWebPath (optional) – Defines another path on the web server where the UI is located. If this parameter is not defined the configured default of the backend is used.
clientIP (optional) – IP address of the client host for that the session is created. If this parameter is not specified the IP address of the HTTP client doing this request is used.
clientUserAgent (optional) – Value of the User-Agent header of the client host for that the session is created. If this parameter is not specified the User-Agent of the current HTTP client doing this request is used.

Response: A redirect to the web UI. The URL of the web UI is either taken from the given parameter or from the configured default of the backend.

For a complete description of the FormLogin-Process please see this documentation

Token Login (since 7.0.1)

POST /ajax/login?action=tokenLogin

This request allows every possible client to create a very short living session. This session can then be transferred to any other client preferably a browser entering then the normal web interface. Then the sessions life time will be extended equally to every other session.

Compared to the login mechanism using the random token, this request is more secure because two tokens are used. One of these tokens is only known to the client and one is generated by the server. Only the combination of both tokens allows to use the session. The combination of both tokens must be done by the client creating the session.

Parameters:

login – The login information.
password – The password.
clientToken – Client side identifier for accessing the session later. The value should be some token that is unique for every login request.
authId – Identifier for tracing every single login request passed between different systems in a cluster. The value should be some token that is unique for every login request. This parameter must be given as URL parameter and not inside the body of the POST request.
client – Identifier of the client using the HTTP/JSON interface. This is for statistic evaluations what clients are used with Open-Xchange. If the autologin request should work the client should be the same as the client sent by the UI in the normal login request. For security considerations it can become necessary to define here the correct client that will use the session.
version – Version of the HTTP/JSON interface client. Only for statistic evaluations.
autologin – True or false. True tells the UI to issue a store request for the session cookie. This store request is necessary if you want the autologin request not to fail. This must be enabled on the server and a client can test with the autologin request if it is enabled or not.
uiWebPath (optional) – Defines another path on the web server where the UI is located. If this parameter is not defined the configured default of the backend is used.
clientIP (optional) – IP address of the client host for that the session is created. If this parameter is not specified the IP address of the HTTP client doing this request is used. Currently the IP address may change when using the session with both tokens. This can be disabled in future releases for security considerations.
clientUserAgent (optional) – Value of the User-Agent header of the client host for that the session is created. If this parameter is not specified the User-Agent of the current HTTP client doing this request is used. Currently the User-Agent may change when using the session. This can be disabled in future releases for security considerations.
jsonResponse (optional, since 7.8.0) – true or false (default). Defines the returned data type as JSON. Default 'false' will return a redirect.

Response: A redirect to the web UI (or JSON including the redirect url in case jsonResponse=true is set). The URL of the web UI is either taken from the given parameter or from the configured default of the backend. This redirect will only contain the server side token. The client side token sent in the request must be appended by the client creating the session. The final URL must have the form redirect_URL&clientToken=token. Both tokens are necessary to use the session and both tokens must match. Otherwise the session is terminated.

Tokens (since 7.0.1)

POST /ajax/login?action=tokens

This request allows clients to access a session created with the tokenLogin request. When accessing the session its life time is extended equally to every other session.

Parameters:

serverToken – Server side identifier for accessing the session. This identifier was created by the server and is contained in the tokenLogin response.
clientToken – Client side identifier for accessing the session. This identifier was created by the client and passed within the POST data of the tokenLogin request.
client – Identifier of the client using the HTTP/JSON interface. Currently this request allows to change the client identifier for the session. This eases creating the session because the identifier of the client using the session must not be known. For security considerations it can become necessary to drop this parameter.

Response: A JSON object conform to the normal response body contrary to the JSON object of the normal login request. This JSON object contains the session identifier, the login, the identifier and the locale of the user.

Logout

GET /ajax/login?action=logout

Parameters:

session – A session ID previously obtained from the login module.

Refresh secret cookie (since 6.18.2)

GET /ajax/login?action=refreshSecret

Parameters:

session – A session ID previously obtained from the login module.

Refresh auto-login cookie

GET /ajax/login?action=store

Parameters:

session – A session ID previously obtained from the login module.

Redirect

GET /ajax/login;jsessionid=1157370816112.OX1?action=redirect

SECURITY WARNING! Utilizing this request is INSECURE! This request allows to access a session with a single one time token. This one time token may be delivered to the wrong client if the protocol has an error or Apache or the load balancer make a mistake. This will cause a wrong user to be in a wrong session. IMMEDIATELY consider not to use this request anymore. You have been warned. Use instead the FormLogin that does not need to use the redirect request.

Parameters:

random – A session random token to jump into the session. This random token is part of the login response. Only a very short configurable time after the login it is allowed to jump into the session with the random token.
client (optional) – The client can be defined here newly if it is not correct on the login request itself.
store (optional) – Tells the UI to do a store request after login to be able to use autologin request.
uiWebPath (optional) – The optional path on the webserver to the UI. If this parameter is not given the configured uiWebPath is used.

Change IP

The following request is especially for integration with systems located in the providers infrastructure. If those systems create a session with the following request the client host IP address in the session can be changed. The IP check for following requests will be done using this newly set client host IP address.

POST /ajax/login?action=changeip

Parameters:

session – A session ID previously obtained from the login module.
clientIP – New IP address of the client host for the current session.

Response: A JSON object containing the string "1" as data attribute.

Redeem Token (since 7.4.0)

POST /ajax/login?action=redeemToken

Parameters:

token – The token created with acquireToken.
authId – Identifier for tracing every single login request passed between different systems in a cluster. The value should be some token that is unique for every login request. This parameter must be given as URL parameter and not inside the body of the POST request.
client – Identifier of the client using the HTTP/JSON interface. The client must identifier must be the same for each request after creating the login session.
secret – The value of the secret string for token logins. This is configured through the tokenlogin-secrets configuration file.

Response: A JSON object containing the session ID used for all subsequent requests. Additionally a random token is contained to be used for the Easy Login method. If configured within tokenlogin-secrets configuration file even the user password will be returned.

Module "config"

The config module is used to retrieve and set user-specific configuration. The configuration is stored in a tree. Each node of the tree has a name and a value. The values of leaf nodes are strings which store the actual configuration data. The values of inner nodes are defined recursively as objects with one field for each child node. The name and the value of each field is the name and the value of the corresponding child node, respectively.

The namespace looks like the following:

/ajax/config/
- gui – A string containing GUI-specific settings (currently, it is a huge JSON object).
- fastgui - A string containing GUI-specific settings. This is a JSON object that must be kept small for performance.
- context_id - the unique identifier of the context (read-only, added 2008-01-28).
- cookielifetime - the cookie life time in seconds or -1 for session cookie (read-only, added 2010-11-16).
- identifier – the unique identifier of the user (read-only).
- contact_id – the unique identifier of the contact data of the user (read-only).
- language – the configured language of the user.
- timezone – the configured timezone of the user.
- availableTimeZones – a JSON object containing all available time zones. The key is the time zone identifier and the value contains its name in users language. (read-only, added 2010-07-08/v6.18).
- calendarnotification - send a mail notification for appointments (deprecated since 2008-12-11)
- tasknotification - send a mail notification for tasks (deprecated since 2008-12-11)
- reloadTimes - Selectable times for GUI reload
- serverVersion - Version string of the server.
- currentTime - User timezone specific long of the current server time.
- maxUploadIdleTimeout - Timeout after that idle uploads are deleted.
- folder/ – the standard folder of the user
  - tasks – the standard task folder (read-only)
  - calendar – the standard calendar folder (read-only)
  - contacts – the standard contacts folder (read-only)
  - infostore – the private infostore folder (read-only, since v6.20.1)
  - eas – whether EAS folder selection is enabled (read-only)
- mail/ – settings for the email module (deprecated 2008-04-29)
  - addresses – all email addresses of the user including the primary address (read-only, deprecated 2008-04-29)
  - defaultaddress – primary email address of the user (read-only, deprecated 2008-04-29)
  - sendaddress – one email address out of the addresses list that are email sent with. (deprecated 2008-04-29)
  - folder/ – the standard email folders (read-only, deprecated 2008-04-29)
    - inbox – identifier of the folder that gets all incoming mails (read-only, deprecated 2008-04-29)
    - drafts – identifier of the folder with the mail drafts (read-only, deprecated 2008-04-29)
    - trash – identifier of the folder with the deleted mails (read-only, deprecated 2008-04-29)
    - spam – identifier of the folder with the spam mails (read-only, deprecated 2008-04-29)
    - sent – identifier of the folder with the sent mails (read-only, deprecated 2008-04-29)
  - htmlinline – activate inlining of HTML attachments. (deprecated 2008-04-29)
  - colorquote – color quoted lines. (deprecated 2008-04-29)
  - emoticons – display emoticons as graphics. (deprecated 2008-04-29)
  - harddelete – delete emails at once. (deprecated 2008-04-29)
  - inlineforward – forward messages as inline or attachment. (deprecated 2008-04-29)
  - vcard – attach vcard when sending mails. (deprecated 2008-04-29)
  - notifyonreadack – notify on read acknowledgement. (deprecated 2008-04-29)
  - msgpreview – show a message preview. (deprecated 2008-04-29)
  - ignorereplytext (deprecated 2008-04-29)
  - nocopytosent – don't put a copy to the sent folder when sending mails. (deprecated 2008-04-29)
  - spambutton - Spam Button should be displayed in GUI or not. (deprecated 2008-04-29)
- participants
  - autoSearch - If a search for all users, groups and resources when participant selection dialog is opened. (read-only, added 2008-10-09/SP5)
  - maximumNumberParticipants – Defines the maximum number of participants for appointments and tasks. (read-only, added 2008-10-20/SP5)
  - showWithoutEmail - If external participants without email should be shown.
  - showDialog – Enables participant selection dialog for appointments and tasks. (read-only, added 2008-04-30/SP4)
- availableModules – Contains a JSON array listing all enabled modules for a user. GUI loads Plugins through this list. To get your plugin listed here, create a subtree below modules/ without a module subelement or with a subelement containing true (read-only, added 2008-02-25)
- minimumSearchCharacters – Minimum number of characters a search pattern must have to prevent large responses and slow queries. (read-only, added 2008-10-20/SP5)
- modules
  - portal
    - gui GUI settings for portal module
    - module
  - mail
    - addresses – all email addresses of the user including the primary address (read-only, added 2008-02-25)
    - appendmailtext – (added 2008-02-25)
    - allowhtmlimages – Alters default setting whether external images contained in HTML content are allowed or not (added 2008-05-27)
    - colorquoted – color quoted lines (added 2008-02-25)
    - contactCollectFolder – contact folder id to save mail addresses from sent mails (added 2008-10-16)
    - contactCollectEnabled – switch contact collection on/off (added 2008-10-16)
    - contactCollectOnMailAccess – enables/disables contact collection for incoming mails. Default is true. (added 2009-09-24)
    - contactCollectOnMailTransport – enables/disables contact collection for outgoing mails. Default is true. (added 2009-09-24)
    - defaultaddress – primary email address of the user (read-only, added 2008-02-25)
    - deletemail – delete emails or move to trash (added 2008-02-25)
    - emoticons – display emoticons as graphics (added 2008-02-25)
    - defaultFolder
      - drafts – identifier of the folder with the mail drafts (read-only, added 2008-02-25)
      - inbox – identifier of the folder that gets all incoming mails (read-only, added 2008-02-25)
      - sent – identifier of the folder with the sent mails (read-only, added 2008-02-25)
      - spam – identifier of the folder with the spam mails (read-only, added 2008-02-25)
      - trash – identifier of the folder with the deleted mails (read-only, added 2008-02-25)
    - forwardmessage – forward messages as inline or attachment (added 2008-02-25)
    - gui GUI settings for mail module
    - inlineattachments – activate inlining of HTML attachments (added 2008-02-25)
    - linewrap – (added 2008-02-25)
    - module – if mail module is enabled or not (added 2008-02-25)
    - phishingheaders – header(s) identifying phishing headers (added 2008-05-27)
    - replyallcc – put all recipients on reply all into CC (added 2008-12-16/SP5)
    - sendaddress – one email address out of the addresses list that are email sent with (added 2008-02-25)
    - spambutton – Spam Button should be displayed in GUI or not (added 2008-02-25)
    - vcard – attach vcard when sending mails (added 2008-02-25)
  - calendar
    - calendar_conflict
    - calendar_freebusy
    - calendar_teamview
    - gui GUI settings for the calendar module
    - module
    - notifyNewModifiedDeleted receive mail notification for new, modified or deleted appointments (added 2008-12-11/SP5)
    - notifyAcceptedDeclinedAsCreator receive mail notification for accepted or declined appointments created by the user (added 2008-12-11/SP5)
    - notifyAcceptedDeclinedAsParticipant receive mail notification for accepted or declined appointments that the user participates (added 2008-12-11/SP5)
    - defaultStatusPrivate Default status for new appointments in private folders, where the user is participant. This does not affect appointments created by this user, which always have the status "accepted". The status are described in User participant object. Default is 0:none (added 2009-07-20/6.12)
    - defaultStatusPublic Default status for new appointments in public folders, where the user is participant. This does not affect appointments created by this user, which always have the status "accepted". The status are described in User participant object. Default is 0:none (added 2009-07-20/6.12)
  - contacts
    - gui GUI settings for the contacts module
    - mailAddressAutoSearch – Define if a search is triggered when the recipient selection dialog is opened or the folder is changed. (read-only, added 2008-10-20/SP5)
    - module True if the contact module is enabled for the current user, false otherwise.
    - singleFolderSearch – True if the current user is allowed to search for contacts only in a single folder. False if contact searches across all folders are allowed. (read-only, added 2009-02-04/SP5 U1)
    - characterSearch – True if the side bar for searching for contacts by a start letter should be displayed. False if the side bar should be hidden. (read-only, added 2009-05-29/6.10)
    - allFoldersForAutoComplete – true if an auto complete search may omit the folder identifier array and search for contacts in all readable folders. This is configured through the contact.properties configuration file. (read-only, added 2010-07-22/v6.18.0)
  - tasks
    - gui GUI settings for the tasks module
    - module
    - delegate_tasks
    - notifyNewModifiedDeleted receive mail notification for new, modified or deleted tasks (added 2008-12-11/SP5)
    - notifyAcceptedDeclinedAsCreator receive mail notification for accepted or declined tasks created by the user (added 2008-12-11/SP5)
    - notifyAcceptedDeclinedAsParticipant receive mail notification for accepted or declined taks that the user participates (added 2008-12-11/SP5)
  - infostore
    - gui GUI settings for the infostore module
    - folder – the standard infostore folders (read-only, since 7.6.0)
      - trash – identifier of the default infostore trash folder (read-only, since 7.6.0)
      - pictures – identifier of the default infostore pictures folder (read-only, since 7.8.0)
      - documents – identifier of the default infostore documents folder (read-only, since 7.8.0)
      - music – identifier of the default infostore music folder (read-only, since 7.8.0)
      - videos – identifier of the default infostore videos folder (read-only, since 7.8.0)
      - templates – identifier of the default infostore templates folder (read-only, since 7.8.0)
    - module
  - interfaces
    - ical
    - vcard
    - syncml
  - folder
    - gui UI settings for the folder tree
    - public_folders
    - read_create_shared_folders
    - tree – Selected folder tree, the user wants to use. Currents trees are 0 for the known OX folder tree and 1 for the new virtual folder tree. (added 2010-04-09/6.18)
  - com.openexchange.extras
    - module – Extras link in the configuration (read only, added 2008-04-29)
  - com.openexchange.user.passwordchange
    - module – Will load Plug-In which allows to change the Password within the users configuration (read only, added 2008-07-09)
  - com.openexchange.user.personaldata
    - module – Will load Plug-In which allows to edit personal contact information within the users configuration (read only, added 2008-07-09)
  - com.openexchange.group
    - enabled – Specifies whether the user is allowed to edit groups and loads the corresponding Plug-In. (read only, added 2008-08-08)
  - com.openexchange.resource
    - enabled – Specifies whether the user is allowed to edit resources and loads the corresponding Plug-In. (read only, added 2008-08-08)
  - com.openexchange.publish
    - enabled – Specifies whether the user is allowed to publish items. (read only, added 2009-05-27)
  - com.openexchange.subscribe
    - enabled – Specifies whether the user is allowed to subscribe sources. (read only, added 2009-05-27)
  - olox20
    - active – Tells the UI if the user is allowed to use the OXtender for Microsoft Outlook 2. (read only, added 2011-03-15/6.20)
    - module – Is set to false to prevent the UI from trying to load a plugin. (read only, added 2011-03-15/6.20)
  - com.openexchange.oxupdater
    - module – Is true if the OXUpdater package is installed and started. (read only, added 2011-06-01/6.20)
    - active – Is true if the user is allowed to download the OXUpdater. Otherwise it's false. (read only, added 2011-06-01/6.20)
  - com.openexchange.passwordchange
    - showStrength – Show a widget, which displays the current passwort Strength while entering. (default: false)
    - minLength – The minimum length of an entered password. (default: 4)
    - maxLength – The maximum length of an entered password. 0 for unlimited. (default: 0)
    - regexp – Defines the class of allowed special characters as Regular Expression. (default: [^a-z0-9])
    - special – Shows an example of allowed special characters to the user. Should be a subset of "regexp" in a human readable format. (default: $, _, or %)

Get configuration data

GET /ajax/config/path

Parameters:

session – A session ID previously obtained from the login module.

Response: Value of the node specified by path.

Set configuration data

PUT /ajax/config/path

Parameters:

session – A session ID previously obtained from the login module.

Request body: The new value of the node specified by path.

Get a property (since 7.6.2)

GET /ajax/config?action=get_property

Parameters:

session – A session ID previously obtained from the login module.
name – The name of the property to return.

Response: A JSON response providing the property's name and its value; e.g.

 {
   "data": {
       "name": "com.openexchange.dummy.prop001",
       "value": "test1234"
   }
 }

Set a property (since 7.6.2)

Note: Only allowed for context administrator!

PUT /ajax/config?action=set_property

Parameters:

session – A session ID previously obtained from the login module.
name – The name of the property to set.

Request body: A JSON object providing the value to set; e.g

 {"value":"test1237"}

Response: A JSON response providing the property's name and its new value; e.g.

 {
   "data": {
       "name": "com.openexchange.dummy.prop001",
       "value": "test1237"
   }
 }

Module "folders"

The folders module is used to access the OX folder structure.

Special System Folders

Folders with some kind of special.

ID	Type	Description
6	contacts	System Users

Get root folders

GET /ajax/folders?action=root

Parameters:

session – A session ID previously obtained from the login module.
columns – A comma-separated list of columns to return. Each column is specified by a numeric column identifier. Column identifiers for folders are defined in Common folder data and Detailed folder data.
tree – (Preliminary) The identifier of the folder tree. If missing '0' (primary folder tree) is assumed.
allowed_modules – (Preliminary) An array of modules (either numbers or strings; e.g. "tasks,calendar,contacts,mail") supported by requesting client. If missing, all available modules are considered.

Response: An array with data for all folders at the root level of the folder structure. Each array element describes one folder and is itself an array. The elements of each array contain the information specified by the corresponding identifiers in the columns parameter.

Common folder data
ID	Name	Type	Value
1	id	String	Object ID
2	created_by	String	User ID of the user who created this object.
3	modified_by	String	User ID of the user who last modified this object.
4	creation_date	Time	Date and time of creation.
5	last_modified	Time	Date and time of the last modification.
6	last_modified_utc	Timestamp	Timestamp of the last modification. Note that the type is Timestamp, not Time. See #Date and time for details. (added 2008-10-17, with SP5, temporary workaround)
20	folder_id	String	Object ID of the parent folder.

Detailed folder data

ID

Name

Type

Value

300

title

String

Name of this folder.

301

module

String

Name of the module which implements this folder; e.g. "tasks", "calendar", "contacts", "infostore", or "mail"

302

type

Number

Type of folder:

1	private
2	public
3	shared
5	system folder
7	This type is no more in use (legacy type). Will be removed with a future update!
16	trash
20	pictures
21	documents
22	music
23	videos
24	templates

304

subfolders

Boolean

true if this folder has subfolders.

305

own_rights

Number or String

Permissions which apply to the current user, as described either in Permission flags or in RFC 2086.

306

permissions

Array

Each element is an object described in Permission object.

307

summary

String

Information about contained objects.

308

standard_folder

Boolean

Indicates whether or not folder is marked as a default folder (only OX folder)

309

total

Number

The number of objects in this Folder.

310

new

Number

The number of new objects in this Folder.

311

unread

Number

The number of unread objects in this Folder.

312

deleted

Number

The number of deleted objects in this Folder.

313

capabilities

Number

Bit mask containing information about mailing system capabilites, as described in capabilities.

314

subscribed

Boolean

Indicates whether this folder should appear in folder tree or not. Note: Standard folders cannot be unsubscribed.

315

subscr_subflds

Boolean

Indicates whether subfolders should appear in folder tree or not.

316

standard_folder_type

Number

Indicates the default folder type. Zero for non-default folder. See Standard folder types

317

supported_capabilities

Array

Each element is a String identifying a supported folder capability as described in supported capabilities. Only applicable for non-mail folders. Read Only, Since 7.4.0.

3010

com.openexchange.publish.publicationFlag

Boolean

Indicates whether this folder is published. Read Only, provided by the com.openexchange.publish plugin, since 6.14.

3020

com.openexchange.subscribe.subscriptionFlag

Boolean

Indicates whether this folder has subscriptions storing their content in this folder. Read Only, provided by the com.openexchange.subscribe plugin, since 6.14.

3030

com.openexchange.folderstorage.displayName

String

Provides the display of the folder's owner. Read Only, Since 6.20.

3060

com.openexchange.share.extendedPermissions

Array

Each element is an object described in Extended permission object. Read Only, Since 7.8.0.

Permission flags

Bits

Value

0-6

Folder permissions:

0	No permissions.
1	See the folder.
2	Create objects in the folder. Note: Does not apply to folders of module system.
4	Create subfolders.
64	All permissions. This is currently the same as "Create subfolders" but in the future additional permissions may be added that will be given to the user when using this value.

The values are scalars and not bit sets. Any other than the described values should not be used. If they are used expect an exception from the backend. Every value automatically contains the access rights covered by lower values.
NOTE: Create objects in the folder is not covered by Create subfolders if folder's module is system.

7-13

Read permissions for objects in the folder:

0	No permissions.
1	Read only own objects.
2	Read all objects.
64	All permissions. This is currently the same as "Read all objects" but in the future additional permissions may be added that will be given to the user when using this value.

The values are scalars and not bit sets. Any other than the described values should not be used. If they are used expect an exception from the backend. Every value automatically contains the access rights covered by lower values.

14-20

Write permissions for objects in the folder:

0	No permissions.
1	Modify only own objects.
2	Modify all objects.
64	All permissions. This is currently the same as "Modify all objects" but in the future additional permissions may be added that will be given to the user when using this value.

The values are scalars and not bit sets. Any other than the described values should not be used. If they are used expect an exception from the backend. Every value automatically contains the access rights covered by lower values.

21-27

Delete permissions for objects in the folder:

0	No permissions.
1	Delete only own objects.
2	Delete all objects.
64	All permissions. This is currently the same as "Delete all objects" but in the future additional permissions may be added that will be given to the user when using this value.

The values are scalars and not bit sets. Any other than the described values should not be used. If they are used expect an exception from the backend. Every value automatically contains the access rights covered by lower values.

28

Admin flag:

0	No permissions.
1	Every operation modifying the folder in some way requires this permission. This are e.g. changing the folder name, modifying the permissions, deleting or moving the folder.

Permission object
Name	Type	Value
bits	Number	For non-mail folders, a number as described in Permission flags.
rights	String	For mail folders, the rights string as defined in RFC 2086.
entity	Number	User ID of the user or group to which this permission applies (ignored for type "anonymous" or "guest").
group	Boolean	true if entity refers to a group, false if it refers to a user (ignored for type "anonymous" or "guest").
type	String	The recipient type, i.e. one of "guest", "anonymous" (required if no internal "entity" defined).
password	String	An additional secret / pin number an anonymous user needs to enter when accessing the share (for type "anonymous", optional) .
email_address	String	The e-mail address of the recipient (for type "guest").
display_name	String	The display name of the recipient (for type "guest", optional).
contact_id	String	The object identifier of the corresponding contact entry if the recipient was chosen from the address book (for type "guest", optional).
contact_folder	String	The folder identifier of the corresponding contact entry if the recipient was chosen from the address book (for type "guest", required if "contact_id" is set).
expiry_date	Time	The end date / expiration time after which the share link is no longer accessible (for type "guest" or "anonymous", optional).

Extended permission object
Name	Type	Value
entity	Number	Identifier of the permission entity (i.e. user-, group- or guest-ID).
bits	Number	A number as described in Permission flags.
type	String	"user" for an internal user, "group" for a group, "guest" for a guest, or "anonymous" for an anonymous permission entity.
display_name	String	A display name for the permission entity.
contact	Object	A (reduced) set of Detailed contact data for "user" and "guest" entities.
share_url	String	The share link for "guest" and "anonymous" entities.
password	String	The optionally set password for "anonymous" entities.
expiry	Date	The optionally set expiry date for "anonymous" entities.

Capabilities
Bit	Description
0	Mailing system supports permissions.
1	Mailing system supports ordering mails by their thread reference.
2	Mailing system supports quota restrictions.
3	Mailing system supports sorting.
4	Mailing system supports folder subscription.

Note: Capabilities describe the entire mailing system (mail account), not the specific folder in which they are transmitted. E.g. bit 4 of the capabilities on the user's inbox describes whether subscriptions are supported by the default account, even though the inbox itself cannot be unsubscribed because it's a standard folder.

Standard Folder Types
Bit	Description
0	No default folder.
1	Task.
2	Calendar.
3	Contact.
7	Inbox.
8	Infostore.
9	Drafts.
10	Sent.
11	Spam.
12	Trash.

Supported Capabilities
Name	Description
permissions	Folder storage supports permissions.
publication	Folder storage supports folder publication.
quota	Folder storage supports quota restrictions.
sort	Folder storage supports sorting.
subscription	Folder storage supports folder subscription.

Get subfolders

GET /ajax/folders?action=list

Parameters:

session – A session ID previously obtained from the login module.
parent – Object ID of a folder, which is the parent folder of the requested folders.
columns – A comma-separated list of columns to return. Each column is specified by a numeric column identifier. Column identifiers for folders are defined in Common folder data and Detailed folder data.
all – Set to 1 to list even not subscribed folders.
tree – The identifier of the folder tree. If missing '0' (primary folder tree) is assumed.
allowed_modules – An array of modules (either numbers or strings; e.g. "tasks,calendar,contacts,mail") supported by requesting client. If missing, all available modules are considered.
errorOnDuplicateName – An optional flag to enable or disable (default) check for duplicate folder names within returned folder response (since v6.20.1). If a duplicate folder name is detected, an appropriate error is returned as response.

Response with timestamp: An array with data for all folders, which have the folder with the requested object ID as parent. Each array element describes one folder and is itself an array. The elements of each array contain the information specified by the corresponding identifiers in the columns parameter.

Get path

GET /ajax/folders?action=path

Parameters:

session – A session ID previously obtained from the login module.
id – Object ID of a folder.
columns – A comma-separated list of columns to return. Each column is specified by a numeric column identifier. Column identifiers for folders are defined in Common folder data and Detailed folder data.
tree – (Preliminary) The identifier of the folder tree. If missing '0' (primary folder tree) is assumed.
allowed_modules – (Preliminary) An array of modules (either numbers or strings; e.g. "tasks,calendar,contacts,mail") supported by requesting client. If missing, all available modules are considered.

Response with timestamp: An array with data for all parent nodes until root folder. Each array element describes one folder and is itself an array. The elements of each array contain the information specified by the corresponding identifiers in the columns parameter.

Get updated folders

GET /ajax/folders?action=updates

Parameters:

session – A session ID previously obtained from the login module.
parent – Object ID of a folder, which is the parent folder of the requested folders.
timestamp – Timestamp of the last update of the requested folders.
ignore (optional) – Which kinds of updates should be ignored. Currently, the only valid value – "deleted" – causes deleted object IDs not to be returned.
columns – A comma-separated list of columns to return. Each column is specified by a numeric column identifier. Column identifiers for folders are defined in Common folder data and Detailed folder data.
tree – (Preliminary) The identifier of the folder tree. If missing '0' (primary folder tree) is assumed.
allowed_modules – (Preliminary) An array of modules (either numbers or strings; e.g. "tasks,calendar,contacts,mail") supported by requesting client. If missing, all available modules are considered.

Response with timestamp: An array with data for new, modified and deleted folders. New and modified folders are represented by arrays. The elements of each array contain the information specified by the corresponding identifiers in the columns parameter. Deleted folders (should the ignore parameter be ever implemented) would be identified by their object IDs as plain strings, without being part of a nested array.

Get a folder

GET /ajax/folders?action=get

Parameters:

session – A session ID previously obtained from the login module.
id – Object ID of the requested folder.
tree – (Preliminary) The identifier of the folder tree. If missing '0' (primary folder tree) is assumed.
allowed_modules – (Preliminary) An array of modules (either numbers or strings; e.g. "tasks,calendar,contacts,mail") supported by requesting client. If missing, all available modules are considered.

Response with timestamp: An object containing all data of the requested folder. The fields of the object are listed in Common folder data and Detailed folder data. The field id is not present. Since OX access controls are folder-based, the folder object also defines the permissions for the objects it contains. The permissions for a given user or group are defined by the object described in Permission object. The format of the actual permissions depends on the type of the folder. The permissions of mail folders are transmitted as a rights string as defined in section 3 of RFC 2086. Permissions of all other folders are transmitted as a single nonnegative integer number. The permissions for any given action on the folder or on contained objects is defined by a group of bits in the binary representation of this number. Each group of bits is interpreted as a separate number. Zero always means "no permissions". Any other values add new permissions and always include the permissions of all lower values. The individual values are described in Permission flags.

Update a folder

PUT /ajax/folders?action=update

Parameters:

session – A session ID previously obtained from the login module.
id – Object ID of the updated folder.
timestamp – Timestamp of the updated folder. If the folder was modified after the specified timestamp, then the update must fail.
tree – (Preliminary) The identifier of the folder tree. If missing '0' (primary folder tree) is assumed.
allowed_modules – (Preliminary) An array of modules (either numbers or strings; e.g. "tasks,calendar,contacts,mail") supported by requesting client. If missing, all available modules are considered.
cascadePermissions – (Optional. Defaults to false) Flag to cascade permissions to all sub-folders. The user must have administrative permissions to all sub-folders subject to change. If one permission change fails, the entire operation fails. (Since 7.8.0)

Request body: Folder object as described in Common folder data and Detailed folder data. Only modified fields are present.

Create a folder

PUT /ajax/folders?action=new

Parameters:

folder_id – The parent folder of the newly created folder
session – A session ID previously obtained from the login module.
tree – (Preliminary) The identifier of the folder tree. If missing '0' (primary folder tree) is assumed.
allowed_modules – (Preliminary) An array of modules (either numbers or strings; e.g. "tasks,calendar,contacts,mail") supported by requesting client. If missing, all available modules are considered.

Request body: Folder object as described in Common folder data and Detailed folder data. The field id should not be present.

Provided that permission is granted to create a folder, its module is bound to the limitation, that the new folder's module must be equal to parent folder's module except that:

Parent folder is one of the system folders private, public, or shared. Below these folders task, calendar, and contact modules are permitted.
Parent folder's module is one of task, calendar, or contact. Below this kind of folders task, calendar, and contact modules are permitted.

Response: Object ID of the newly created folder.

Delete folders

PUT /ajax/folders?action=delete

Parameters:

session – A session ID previously obtained from the login module.
timestamp – The optional timestamp of the last update of the deleted folders.
tree – (Preliminary) The identifier of the folder tree. If missing '0' (primary folder tree) is assumed.
allowed_modules – (Preliminary) An array of modules (either numbers or strings; e.g. "tasks,calendar,contacts,mail") supported by requesting client. If missing, all available modules are considered.
hardDelete - Optional, defaults to \"false\". If set to \"true\", the folders are deleted permanently. Otherwise, and if the underlying storage supports a trash folder and the folders are not yet located below the trash folder, they are moved to the trash folder.

Request body: An array with object IDs of the folders that shall be deleted.

Response: An array with object IDs of folders that were NOT deleted. There may be a lot of different causes for a not deleted folder: A folder has been modified in the mean time, the user does not have the permission to delete it or those permissions have just been removed, the folder does not exist, etc.

Clearing a folder's content

PUT /ajax/folders?action=clear

Parameters:

session – A session ID previously obtained from the login module.
tree – (Preliminary) The identifier of the folder tree. If missing '0' (primary folder tree) is assumed.
allowed_modules – (Preliminary) An array of modules (either numbers or strings; e.g. "tasks,calendar,contacts,mail") supported by requesting client. If missing, all available modules are considered.

Request body: A JSON array containing the folder ID(s) whose content should be cleared. NOTE: Although the requests offers to clear multiple folders at once it is recommended to clear only one folder per request since if any exception occurs (e.g. missing permissions) the complete request is going to be aborted.

Response: A JSON array containing the IDs of folders that could not be cleared due to a concurrent modification. Meaning you receive an empty JSON array if everything worked well.

Get all visible folder of a certain module (since v6.18.2)

PUT /ajax/folders?action=allVisible

Parameters:

session – A session ID previously obtained from the login module.
tree – The identifier of the folder tree. If missing '0' (primary folder tree) is assumed.
content_type – The desired content type (either numbers or strings; e.g. "tasks", "calendar", "contacts", "mail")
columns – A comma-separated list of columns to return. Each column is specified by a numeric column identifier. Column identifiers for folders are defined in Common folder data and Detailed folder data.

Request body: None

Response with timestamp: A JSON object containing three fields: "private", "public, and "shared". Each field is a JSON array with data for all folders. Each folder is itself described by an array.

Get shared folders (Since 7.8.0, Preliminary)

GET /ajax/folders?action=shares

Parameters:

session – A session ID previously obtained from the login module.
columns – A comma-separated list of columns to return. Each column is specified by a numeric column identifier. Column identifiers for folders are defined in Common folder data and Detailed folder data.
all – Set to 1 to list even not subscribed folders.
tree – The identifier of the folder tree. If missing '0' (primary folder tree) is assumed.
content_type – The desired content type (either numbers or strings; e.g. \"tasks\", \"calendar\", \"contacts\", \"infostore\"). Note: this action is not implemented for module "mail".

Response with timestamp: An array with data for all folders that are considered as shared by the user. Each array element describes one folder and is itself an array. The elements of each array contain the information specified by the corresponding identifiers in the columns parameter.

Module "tasks"

The tasks module is used to access task information.

Get all tasks

GET /ajax/tasks?action=all

Parameters:

session – A session ID previously obtained from the login module.
folder – Object ID of the folder, whose contents are queried.
columns – A comma-separated list of columns to return. Each column is specified by a numeric column identifier. Column identifiers for tasks are defined in Common object data, Detailed task and appointment data and Detailed task data.
sort (optional) – The identifier of a column which determines the sort order of the response. If this parameter is specified, then the parameter order must be also specified.
order (optional) – "asc" if the response entires should be sorted in the ascending order, "desc" if the response entries should be sorted in the descending order. If this parameter is specified, then the parameter sort must be also specified.

Response with timestamp: An array with task data. Each array element describes one task and is itself an array. The elements of each array contain the information specified by the corresponding identifiers in the columns parameter.

Detailed task and appointment data

ID

Name

Type

Value

200

title

String

Short description.

201

start_date

Date or Time

Inclusive start of the event as Date for tasks and whole day appointments and Time for normal appointments. For sequencies, this date must be part of the sequence, i. e. sequencies always start at this date. (deprecated for tasks since v7.6.1, replaced by start_time and full_time)

202

end_date

Date or Time

Exclusive end of the event as Date for tasks and whole day appointments and as Time for normal appointments. (deprecated for tasks since v7.6.1, replaced by end_time and full_time)

203

note

String

Long description.

204

alarm

Number or Time

Specifies when to notify the participants as the number of minutes before the start of the appointment (-1 for "no alarm"). For tasks, the Time value specifies the absolute time when the user should be notified.

209

recurrence_type

Number

Specifies the type of the recurrence for a task sequence:

0	none (single event)
1	daily
2	weekly
3	monthly
4	yearly

212

days

Number

Specifies which days of the week are part of a sequence. The value is a bitfield with bit 0 indicating sunday, bit 1 indicating monday and so on. May be present if recurrence_type > 1. If allowed but not present, the value defaults to 127 (all 7 days).

213

day_in_month

Number

Specifies which day of a month is part of the sequence. Counting starts with 1. If the field "days" is also present, only days selected by that field are counted. If the number is bigger than the number of available days, the last available day is selected. Present if and only if recurrence_type > 2.

214

month

Number

Month of the year in yearly sequencies. 0 represents January, 1 represents February and so on. Present if and only if recurrence_type = 4.

215

interval

Number

Specifies an integer multiplier to the interval specified by recurrence_type. Present if and only if recurrence_type > 0. Must be 1 if recurrence_type = 4.

216

until

Date

Inclusive end date of a sequence. May be present only if recurrence_type > 0. The sequence has no end date if recurrence_type > 0 and this field is not present. Note: since this is a Date, the entire day after the midnight specified by the value is included.

217

notification

Boolean

If true, all participants are notified of any changes to this object. This flag is valid for the current change only, i. e. it is not stored in the database and is never sent by the server to the client.

220

participants

Array

Each element identifies a participant, user, group or booked resource as described in participant table.

221

users

Array

Each element represents a participant as described in User participant object. User groups are resolved and are represented by their members. Any user can occur only once.

222

occurrences

Number

Specifies how often a recurrence should appear. May be present only if recurrence_type > 0.

223

uid

String

Can only be written when the object is created. Internal and external globally unique identifier of the appointment or task. Is used to recognize appointments within iCal files. If this attribute is not written it contains an automatic generated UUID.

224

organizer

String

Contains the email address of the appointment organizer which is not necessarily an internal user. Not implemented for tasks.

225

sequence

Number

iCal sequence number. Not implemented for tasks. Must be incremented on update. Will be incremented by the server, if not set.

226

confirmations

Array

Each element represents a confirming participant as described in confirming participant. This can be internal and external user. Not implemented for tasks.

227

organizerId

Number

Contains the userIId of the appointment organizer if it is an internal user. Not implemented for tasks. (Introduced with 6.20.1)

228

principal

String

Contains the email address of the appointment principal which is not necessarily an internal user. Not implemented for tasks. (Introduced with 6.20.1)

229

principalId

Number

Contains the userIId of the appointment principal if it is an internal user. Not implemented for tasks. (Introduced with 6.20.1)

401

full_time

Boolean

True if the event is a whole day appointment or task, false otherwise.

Participant identifier

Name

Type

Value

id

Number

User ID

type

Number

Type of participant:

1	user
2	user group
3	resource
4	resource group
5	external user

mail

String

mail address of an external participant

User participant object

Name

Type

Value

id

Number

User ID. Confirming for other users only works for appointments and not for tasks.

display_name

String

Displayable name of the participant.

confirmation

Number

0	none
1	accepted
2	declined
3	tentative

confirmmessage

String

Confirm Message of the participant

Confirming participant

Name

Type

Value

type

Number

Type of participant:

1	user
5	external user

mail

String

email address of external participant

display_name

String

display name of external participant

status

Number

0	none
1	accepted
2	declined
3	tentative

message

String

Confirm Message of the participant

Detailed task data

ID

Name

Type

Value

300

status

Number

Status of the task:

1	not started
2	in progress
3	done
4	waiting
5	deferred

301

percent_completed

Number

How much of the task is completed. An integer number between 0 and 100.

302

actual_costs

Number

A monetary attribute to store actual costs of a task. Allowed values must be in the range -9999999999.99 and 9999999999.99.

303

actual_duration

304

after_complete

Date

Deprecated. Only present in AJAX interface. Value will not be stored on OX server.

305

billing_information

307

target_costs

Number

A monetary attribute to store target costs of a task. Allowed values must be in the range -9999999999.99 and 9999999999.99.

308

target_duration

309

priority

Number

1 = LOW, 2 = MEDIUM, 3 = HIGH

312

currency

313

trip_meter

314

companies

315

date_completed

316

start_time

Date or Time

Inclusive start as Date for whole day tasks and Time for normal tasks.

317

end_time

Date or Time

Exclusive end as Date for whole day tasks and as Time for normal tasks.

Get a list of tasks

PUT /ajax/tasks?action=list

Parameters:

session – A session ID previously obtained from the login module.
columns – A comma-separated list of columns to return. Each column is specified by a numeric column identifier. Column identifiers for tasks are defined in Common object data, Detailed task and appointment data and Detailed task data.

Request body: An array of with object IDs of requested tasks.

Response with timestamp: An array with task data. Each array element describes one task and is itself an array. The elements of each array contain the information specified by the corresponding identifiers in the columns parameter.

Get updated tasks

GET /ajax/tasks?action=updates

Parameters:

session – A session ID previously obtained from the login module.
folder – Object ID of the folder, whose contents are queried.
columns – A comma-separated list of columns to return. Each column is specified by a numeric column identifier. Column identifiers for tasks are defined in Common object data, Detailed task and appointment data and Detailed task data.
sort (optional) – The identifier of a column which determines the sort order of the response. If this parameter is specified, then the parameter order must be also specified.
order (optional) – "asc" if the response entires should be sorted in the ascending order, "desc" if the response entries should be sorted in the descending order. If this parameter is specified, then the parameter sort must be also specified.
timestamp – Timestamp of the last update of the requested tasks.
ignore – Which kinds of updates should be ignored. Omit this parameter or set it to "deleted" to not have deleted tasks identifier in the response. Set this parameter to "false" and the response contains deleted tasks identifier.

Response with timestamp: An array with new, modified and deleted tasks. New and modified tasks are represented by arrays. The elements of each array contain the information specified by the corresponding identifiers in the columns parameter. Deleted tasks would be identified by their object IDs as plain strings, without being part of a nested array.

Get a task

GET /ajax/tasks?action=get

Parameters:

session – A session ID previously obtained from the login module.
id – Object ID of the requested task.
folder – Object ID of the task's folder.

Response with timestamp: An object containing all data of the requested task. The fields of the object are listed in Common object data, Detailed task and appointment data and Detailed task data. The field id is not included.

Update a task

PUT /ajax/tasks?action=update

Parameters:

session – A session ID previously obtained from the login module.
folder – Folder Identifier through that the task is accessed. This is necessary for checking the permissions.
id – Object ID of the updated task.
timestamp – Timestamp of the updated task. If the task was modified after the specified timestamp, then the update must fail.

Request body: Task object as described in Common object data, Detailed task and appointment data and Detailed task data. Only modified fields are present.

Create a task

PUT /ajax/tasks?action=new

Parameters:

session – A session ID previously obtained from the login module.

Request body: Task object as described in Common object data, Detailed task and appointment data and Detailed task data. The field id is not present.

Response: A json objekt with attribute id of the newly created task.

Delete task

PUT /ajax/tasks?action=delete

Parameters:

session – A session ID previously obtained from the login module.
timestamp – Timestamp of the last update of the deleted tasks.

Request body: An object in the field “id” and “folder”.

Response: An array with object IDs of tasks which were modified after the specified timestamp and were therefore not deleted.

Delete tasks (since v6.22)

PUT /ajax/tasks?action=delete

Parameters:

session – A session ID previously obtained from the login module.
timestamp – Timestamp of the last update of the deleted tasks.

Request body: An array of objects with the fields “id” and “folder”.

Response: An array with object IDs of tasks which were modified after the specified timestamp and were therefore not deleted.

Confirm task

PUT /ajax/tasks?action=confirm

Parameters:

session – A session ID previously obtained from the login module.
id – Object ID of the to confirm task.
folder – ID of the folder through that the task is accessed.
timestamp – Timestamp of the last update of the to confirm task.

Request body: An object with the fields "confirmation" and "confirmmessage" as described in User participant object.

Response: Nothing, except the standard response object with empty data, the timestamp of the confirmed and thereby updated task, and maybe errors.

Search for tasks

PUT /ajax/tasks?action=search

Parameters:

session – A session ID previously obtained from the login module.
columns – A comma-separated list of columns to return. Each column is specified by a numeric column identifier. Column identifiers for appointments are defined in Common object data, Detailed task and appointment data and Detailed task data.
sort (optional) – The identifier of a column which determines the sort order of the response. If this parameter is specified , then the parameter order must be also specified.
order (optional) – "asc" if the response entires should be sorted in the ascending order, "desc" if the response entries should be sorted in the descending order. If this parameter is specified, then the parameter sort must be also specified.

Request Body: A JSON object with attributes described in Search tasks

Search tasks
Name	Type	Value
pattern	String	Search pattern to find tasks. In the pattern, the character "*" matches zero or more characters and the character "?" matches exactly one character. All other characters match only themselves.
folder	Number	(optional) Defines the folder to search for tasks in. If this is omitted in all task folders will be searched.
start	Date or Time	(optional) Inclusive start date for a time range the tasks should end in. If start is omitted end is ignored.
end	Date or Time	(optional) Exclusive end date for a time range the tasks should end in. If this parameter is omitted the time range has an open end.

Response with timestamp: An array with matching tasks. Tasks are represented by arrays. The elements of each array contain the information specified by the corresponding identifiers in the columns parameter.

Module "contacts"

The contacts module is used to access contact information.

Get all contacts

GET /ajax/contacts?action=all

Parameters:

session – A session ID previously obtained from the login module.
folder – Object ID of the folder, whose contents are queried (optional from 6.22.2 on: If not set, the contents of all visible folders are used instead).
columns – A comma-separated list of columns to return. Each column is specified by a numeric column identifier. Column identifiers for contacts are defined in Common object data and Detailed contact data.
sort (optional) – The identifier of a column which determines the sort order of the response. If this parameter is specified, then the parameter order must be also specified.
order (optional) – "asc" if the response entires should be sorted in the ascending order, "desc" if the response entries should be sorted in the descending order. If this parameter is specified, then the parameter sort must be also specified.
collation (preliminary, since 6.20) – allows you to specify a collation to sort the contacts by. As of 6.20, only supports "gbk" and "gb2312", not needed for other languages. Parameter sort should be set for this to work.

Response with timestamp: An array with contact data. Each array element describes one contact and is itself an array. The elements of each array contain the information specified by the corresponding identifiers in the columns parameter.

Detailed contact data
ID	Displayed name	Name	Type	Value
223		uid	String	Can only be written when the object is created. Internal and external globally unique identifier of the contact. Is used to recognize contacts within vCard files. If this attribute is not written it contains an automatic generated UUID.
500	Display name	display_name	String
501	Given name	first_name	String	First name.
502	Sur name	last_name	String	Last name.
503	Middle name	second_name	String
504	Suffix	suffix	String
505	Title	title	String
506	Street home	street_home	String
507	Postal code home	postal_code_home	String
508	City home	city_home	String
509	State home	state_home	String
510	Country home	country_home	String
511	Birthday	birthday	Date
512	Marital status	marital_status	String
513	Number of children	number_of_children	String
514	Profession	profession	String
515	Nickname	nickname	String
516	Spouse name	spouse_name	String
517	Anniversary	anniversary	Date
518	Note	note	String
519	Department	department	String
520	Position	position	String
521	Employee type	employee_type	String
522	Room number	room_number	String
523	Street business	street_business	String
524	Internal user id	user_id	Number
525	Postal code business	postal_code_business	String
526	City business	city_business	String
527	State business	state_business	String
528	Country business	country_business	String
529	Number of employee	number_of_employees	String
530	Sales volume	sales_volume	String
531	Tax id	tax_id	String
532	Commercial register	commercial_register	String
533	Branches	branches	String
534	Business category	business_category	String
535	Info	info	String
536	Manager's name	manager_name	String
537	Assistant's name	assistant_name	String
538	Street other	street_other	String
539	City other	city_other	String
540	Postal code other	postal_code_other	String
541	Country other	country_other	String
542	Telephone business 1	telephone_business1	String
543	Telephone business 2	telephone_business2	String
544	FAX business	fax_business	String
545	Telephone callback	telephone_callback	String
546	Telephone car	telephone_car	String
547	Telephone company	telephone_company	String
548	Telephone home 1	telephone_home1	String
549	Telephone home 2	telephone_home2	String
550	FAX home	fax_home	String
551	Cellular telephone 1	cellular_telephone1	String
552	Cellular telephone 2	cellular_telephone2	String
553	Telephone other	telephone_other	String
554	FAX other	fax_other	String
555	Email 1	email1	String
556	Email 2	email2	String
557	Email 3	email3	String
558	URL	url	String
559	Telephone ISDN	telephone_isdn	String
560	Telephone pager	telephone_pager	String
561	Telephone primary	telephone_primary	String
562	Telephone radio	telephone_radio	String
563	Telephone telex	telephone_telex	String
564	Telephone TTY/TDD	telephone_ttytdd	String
565	Instantmessenger 1	instant_messenger1	String
566	Instantmessenger 2	instant_messenger2	String
567	Telephone IP	telephone_ip	String
568	Telephone assistant	telephone_assistant	String
569	Company	company	String
570		image1	String
571	Dynamic Field 1	userfield01	String
572	Dynamic Field 2	userfield02	String
573	Dynamic Field 3	userfield03	String
574	Dynamic Field 4	userfield04	String
575	Dynamic Field 5	userfield05	String
576	Dynamic Field 6	userfield06	String
577	Dynamic Field 7	userfield07	String
578	Dynamic Field 8	userfield08	String
579	Dynamic Field 9	userfield09	String
580	Dynamic Field 10	userfield10	String
581	Dynamic Field 11	userfield11	String
582	Dynamic Field 12	userfield12	String
583	Dynamic Field 13	userfield13	String
584	Dynamic Field 14	userfield14	String
585	Dynamic Field 15	userfield15	String
586	Dynamic Field 16	userfield16	String
587	Dynamic Field 17	userfield17	String
588	Dynamic Field 18	userfield18	String
589	Dynamic Field 19	userfield19	String
590	Dynamic Field 20	userfield20	String	Contains a UUID if one was assigned (after 6.18.2)
592		distribution_list	Array	If this contact is a distribution list, then this field is an array of objects. Each object describes a member of the list as defined in Distribution list member.
594	Number of distributionlists	number_of_distribution_list	Number
596		number_of_images	Number
597		image_last_modified	Timestamp
598	State other	state_other	String
599		file_as	String
601		image1_content_type	String
602		mark_as_distributionlist	Boolean
605	Default address	default_address	Number
606		image1_url	String
608		useCount	Number	In case of sorting purposes the column 609 is also available, which places global address book contacts at the beginning of the result. If 609 is used, the order direction (ASC, DESC) is ignored.
610		yomiFirstName	String	Kana based representation for the First Name. Commonly used in japanese environments for searchin/sorting issues. (since 6.20)
611		yomiLastName	String	Kana based representation for the Last Name. Commonly used in japanese environments for searchin/sorting issues. (since 6.20)
612		yomiCompany	String	Kana based representation for the Company. Commonly used in japanese environments for searchin/sorting issues. (since 6.20)
613		addressHome	String	Support for Outlook 'home' address field. (since 6.20.1)
614		addressBusiness	String	Support for Outlook 'business' address field. (since 6.20.1)
615		addressOther	String	Support for Outlook 'other' address field. (since 6.20.1)

Distribution list member

Name

Type

Value

id

String

Object ID of the member's contact if the member is an existing contact.

folder_id

String

Parent folder ID of the member's contact if the member is an existing contact (preliminary, from 6.22 on).

display_name

String

Display name

mail

String

Email address (mandatory before 6.22, afterwards optional if you are referring to an internal contact)

mail_field

Number

Which email field of an existing contact (if any) is used for the mail field.

0	independent contact
1	default email field (email1)
2	second email field (email2)
3	third email field (email3)

Get a list of contacts

PUT /ajax/contacts?action=list

Parameters:

session – A session ID previously obtained from the login module.
columns – A comma-separated list of columns to return. Each column is specified by a numeric column identifier. Column identifiers for contacts are defined in Common object data and Detailed contact data.

Request body: An array with objects. Each object contains fields “id” and “folder” of requested contacts.

Response with timestamp: An array with contact data. Each array element describes one contact and is itself an array. The elements of each array contain the information specified by the corresponding identifiers in the columns parameter.

Get a list of users

PUT /ajax/contacts?action=listuser

Parameters:

session – A session ID previously obtained from the login module.
columns – A comma-separated list of columns to return. Each column is specified by a numeric column identifier. Column identifiers for contacts are defined in Common object data and Detailed contact data.

Request body: An array with id

Response with timestamp: An array with contact data. Each array element describes one contact and is itself an array. The elements of each array contain the information specified by the corresponding identifiers in the columns parameter.

Available with SP4

Get updated contacts

GET /ajax/contacts?action=updates

Parameters:

session – A session ID previously obtained from the login module.
folder – Object ID of the folder, whose contents are queried.
columns – A comma-separated list of columns to return. Each column is specified by a numeric column identifier. Column identifiers for contacts are defined in Common object data and Detailed contact data.
sort (optional) – The identifier of a column which determines the sort order of the response. If this parameter is specified, then the parameter order must be also specified.
order (optional) – "asc" if the response entires should be sorted in the ascending order, "desc" if the response entries should be sorted in the descending order. If this parameter is specified, then the parameter sort must be also specified.
timestamp – Timestamp of the last update of the requested contacts.
ignore (mandatory - should be set to "deleted") (deprecated) – Which kinds of updates should be ignored. Currently, the only valid value – "deleted" – causes deleted object IDs not to be returned.

Response with timestamp: An array with new, modified and deleted contacts. New and modified contacts are represented by arrays. The elements of each array contain the information specified by the corresponding identifiers in the columns parameter. Deleted contacts (should the ignore parameter be ever implemented) would be identified by their object IDs as plain strings, without being part of a nested array.

Get a contact

GET /ajax/contacts?action=get

Parameters:

session – A session ID previously obtained from the login module.
id – Object ID of the requested contact.
folder – Object ID of the contact's folder.

Response with timestamp: An object containing all data of the requested contact. The fields of the object are listed in Common object data and Detailed contact data. The field id is not included.

Get contact by user ID

GET /ajax/contacts?action=getuser

Parameters:

session – A session ID previously obtained from the login module.
id – User ID (not Object ID) of the requested user.

Response with timestamp: An object containing all data of the requested contact. The fields of the object are listed in Common object data and Detailed contact data.

Available with SP4 package.

Update a contact

PUT /ajax/contacts?action=update

Parameters:

session – A session ID previously obtained from the login module.
folder – Folder identifier through that the contact is accessed. This is necessary for checking the permissions.
id – Object ID of the updated contact.
timestamp – Timestamp of the updated contact. If the contact was modified after the specified timestamp, then the update must fail.

Request body: Contact object as described in Common object data and Detailed contact data. Only modified fields are present.

To remove some contact image send the image attribute set to null.

To change or add some contact image the PUT command must be replaced with a POST command and all data must be provided within a multipart/form-data body. The normal request body must be placed into a form field named json while the image file must be placed in a file field named file. The response is then an HTML page as described in section File uploads.

Create a contact

PUT /ajax/contacts?action=new

Parameters:

session – A session ID previously obtained from the login module.

Request body: Contact object as described in Common object data and Detailed contact data. The field id is not included.

Response: A json objekt with attribute id of the newly created contact.

To add some contact image the PUT command must be replaced with a POST command and all data must be provided within a multipart/form-data body. The normal request body must be placed into a form field named json while the image file must be placed in a file field named file. The response is then an HTML page as described in section File uploads.

Delete a contact

PUT /ajax/contacts?action=delete

Parameters:

session – A session ID previously obtained from the login module.
timestamp – Timestamp of the last update of the deleted contacts.

Request body: An object with the fields “id” and “folder”.

Delete contacts (since v6.22)

PUT /ajax/contacts?action=delete

Parameters:

session – A session ID previously obtained from the login module.
timestamp – Timestamp of the last update of the deleted contacts.

Request body: An array of objects with the fields “id” and “folder”.

Search contacts

PUT /ajax/contacts?action=search

Parameters:

session – A session ID previously obtained from the login module.
columns – The requested fields
sort (optional) – The identifier of a column which determines the sort order of the response. If this parameter is specified, then the parameter order must be also specified. In case of use of column 609 (use count depending order for collected contacts with global address book) the parameter "order" ist NOT necessary and will be ignored.
order (optional) – "asc" if the response entires should be sorted in the ascending order, "desc" if the response entries should be sorted in the descending order. If this parameter is specified, then the parameter sort must be also specified.
collation (preliminary, since 6.20) – allows you to specify a collation to sort the contacts by. As of 6.20, only supports "gbk" and "gb2312", not needed for other languages. Parameter sort should be set for this to work.

Request body: An Object as described in Search contacts.

Search contacts
Name	Type	Value
pattern	String	Search pattern to find contacts. In the pattern, the character "*" matches zero or more characters and the character "?" matches exactly one character. All other characters match only themselves. Matching is performed against any substring of the field `display_name`.
startletter	String	Search contacts with the given startletter. If this field is present, the pattern is matched against the contact field which is specified by the property contact_first_letter_field on the server (default: last name). Otherwise, the pattern is matched against the display name.
folder	Array of Number	If a list of folder identifiers or at least a single folder identifier is given, only in that folders will be searched for contacts. This paramenter is optional but searching in all contact folders that are viewable and where objects can be read in is more expensive on that database than searching in a dedicated number of them. The possibility to provide here an array of folder identifier has been added with 6.10.

Alternative request body: An Object as described in Search contacts alternative.

Search contacts alternative
Name	Type	Value
last_name	String	Searches contacts where the last name match with the given last name.
first_name	String	Searches contacts where the first name match with the given first name.
display_name	String	Searches contacts where the display name match with the given display name.
email1	String	Searches contacts where the email1 address match with the given search pattern. (requires version >= 6.12)
email2	String	Searches contacts where the email2 address match with the given search pattern. (requires version >= 6.12)
email3	String	Searches contacts where the email3 address match with the given search pattern. (requires version >= 6.12)
company	String	Searches contacts where the company match with the given search pattern. (requires version >= 6.12)
categories	String	Searches contacts where the categories match with the given search pattern.
orSearch	Boolean	If set to true, a contact is returned if any specified pattern matches at the start of the corresponding field. Otherwise, a contact is returned if all specified patterns match any substring of the corresponding field.
emailAutoComplete	Boolean	If set to true, results are guaranteed to contain at least one email adress and the search is performed as if orSearch were set to true. The actual value of orSearch is ignored.
exactMatch	Boolean	If set to true, contacts are returned where the specified patterns match the corresponding fields exactly. Otherwise, a 'startsWith' or 'substring' comparison is used based on the 'orSearch' parameter. (requires version > 6.22.1)

Response: An array with contact data. Each array element describes one contact and is itself an array. The elements of each array contain the information specified by the corresponding identifiers in the columns parameter.

Search contacts by filter (since 6.20)

PUT /ajax/contacts?action=advancedSearch

Parameters:

session – A session ID previously obtained from the login module.
columns – The requested fields
sort (optional) – The identifier of a column which determines the sort order of the response. If this parameter is specified, then the parameter order must be also specified.
order (optional) – "asc" if the response entires should be sorted in the ascending order, "desc" if the response entries should be sorted in the descending order. If this parameter is specified, then the parameter sort must be also specified.
collation (preliminary, since 6.20) – allows you to specify a collation to sort the contacts by. As of 6.20, only supports "gbk" and "gb2312", not needed for other languages. Parameter sort should be set for this to work.

Request body: An Object as described in Search Filter

Response: An array with contact data. Each array element describes one contact and is itself an array. The elements of each array contain the information specified by the corresponding identifiers in the columns parameter.

Search contacts by anniversary (Since 6.22.1, Preliminary)

Find contacts whose anniversary falls into a timerange.

GET /ajax/contacts?action=anniversaries

Parameters:

session – A session ID previously obtained from the login module.
start – The lower (inclusive) limit of the requested time-range.
end – The upper (exclusive) limit of the requested time-range.
columns – The requested fields.
folder (optional) – Object ID of the parent folder that is searched. If not set, all visible folders are used.
sort (optional) – The identifier of a column which determines the sort order of the response. If not specified, the results are sorted ascending by their anniversary in the supplied timerange. If this parameter is specified, then the parameter order must be also specified.
order (optional) – "asc" if the response entires should be sorted in the ascending order, "desc" if the response entries should be sorted in the descending order. If this parameter is specified, then the parameter sort must be also specified.
collation (optional) – Allows you to specify a collation to sort the contacts by. As of 6.20, only supports "gbk" and "gb2312", not needed for other languages. Parameter sort should be set for this to work.

Response with timestamp: An array with contact data. Each array element describes one contact and is itself an array. The elements of each array contain the information specified by the corresponding identifiers in the columns parameter.

Search contacts by birthday (Since 6.22.1, Preliminary)

Find contacts whose birthday falls into a timerange.

GET /ajax/contacts?action=birthdays

Parameters:

session – A session ID previously obtained from the login module.
start – The lower (inclusive) limit of the requested time-range.
end – The upper (exclusive) limit of the requested time-range.
columns – The requested fields.
folder (optional) – Object ID of the parent folder that is searched. If not set, all visible folders are used.
sort (optional) – The identifier of a column which determines the sort order of the response. If not specified, the results are sorted ascending by their birthday in the supplied timerange. If this parameter is specified, then the parameter order must be also specified.
order (optional) – "asc" if the response entires should be sorted in the ascending order, "desc" if the response entries should be sorted in the descending order. If this parameter is specified, then the parameter sort must be also specified.
collation (optional) – Allows you to specify a collation to sort the contacts by. As of 6.20, only supports "gbk" and "gb2312", not needed for other languages. Parameter sort should be set for this to work.

Response with timestamp: An array with contact data. Each array element describes one contact and is itself an array. The elements of each array contain the information specified by the corresponding identifiers in the columns parameter.

Auto-complete contacts (Since 7.6.1, Preliminary)

Find contacts based on a prefix, usually used to auto-complete e-mail recipients while the user is typing.

GET /ajax/contacts?action=autocomplete

Parameters:

session – A session ID previously obtained from the login module.
query – The query to search for.
folder (optional) – Object ID of the parent folder that is searched. If not set, all visible folders are used.
email (optional) – Whether to only include contacts with at least one e-mail address. Defaults to "true".
columns – The requested fields.
sort (optional) – The identifier of a column which determines the sort order of the response. If this parameter is specified, then the parameter order must be also specified.
order (optional) – "asc" if the response entires should be sorted in the ascending order, "desc" if the response entries should be sorted in the descending order. If this parameter is
collation (optional) – Allows you to specify a collation to sort the contacts by. As of 6.20, only supports "gbk" and "gb2312", not needed for other languages. Parameter sort should be set for this to work.
left_hand_limit (optional) – A positive integer number to specify the "left-hand" limit of the range to return.
right_hand_limit (optional) – A positive integer number to specify the "right-hand" limit of the range to return.

Response with timestamp: An array with contact data. Each array element describes one contact and is itself an array. The elements of each array contain the information specified by the corresponding identifiers in the columns parameter.

Module "calendar"

The calendar module is used to access calendar data.

Get all appointments

GET /ajax/calendar?action=all

Parameters:

session – A session ID previously obtained from the login module.
folder (optional) – Object ID of the folder, whose contents are queried. If not specified, defaults to all calendar folders.
columns – A comma-separated list of columns to return. Each column is specified by a numeric column identifier. Column identifiers for appointments are defined in Common object data, Detailed task and appointment data and Detailed appointment data.
start – Lower inclusive limit of the queried range as a Date. Only appointments which start on or after this date are returned.
end – Upper exclusive limit of the queried range as a Date. Only appointments which end before this date are returned.
recurrence_master – Extract the recurrence to several appointments. The default value is false so every appointment of the recurrence will be calculated.
showPrivate (optional) – only works in shared folders: When enabled, shows private appointments of the folder owner. Such appointments are anonymized by stripping away all information except start date, end date and recurrence information (since 6.18)

Response with timestamp: An array with appointment data. Each array element describes one appointment and is itself an array. The elements of each array contain the information specified by the corresponding identifiers in the columns parameter. Appointment sequencies are broken up into individual appointments and each occurrence of a sequence in the requested range is returned separately. The appointments are sorted in ascending order by the field start_date.

Detailed appointment data

ID

Name

Type

Value

206

recurrence_id

Number

Object ID of the entire appointment sequence. Present on series and change exception appointments. Equals to object identifier on series appointment and is different to object identifier on change exceptions.

207

recurrence_position

Number

1-based position of an individual appointment in a sequence. Present if and only if recurrence_type > 0.

208

recurrence_date_position

Date

Date of an individual appointment in a sequence. Present if and only if recurrence_type > 0.

210

change_exceptions

Array

An array of Dates, representing all change exceptions of a sequence.

211

delete_exceptions

Array

An array of Dates, representing all delete exceptions of a sequence.

400

location

String

Location

402

shown_as

Number

Describes, how this appointment appears in availability queries:

1	reserved
2	temporary
3	absent
4	free

408

timezone

String

Timezone

410

recurrence_start

Date

Start of a sequence without time

ignore_conflicts

Boolean

Ignore soft conflicts for the new or modified appointment. This flag is valid for the current change only, i. e. it is not stored in the database and is never sent by the server to the client.

Get appointment information

GET /ajax/calendar?action=has

Parameters:

session – A session ID previously obtained from the login module.
start – Lower inclusive limit of the queried range as a Date. Only appointments which end on or after this date are returned.
end – Upper exclusive limit of the queried range as a Date. Only appointments which start before this date are returned.

Response is an array of booleans. Array length is the number of days. Each entry in the array corresponds with one day in the range that was queried, explaining whether there is an appointment on this day or not.

Get a list of appointments

PUT /ajax/calendar?action=list

Parameters:

session – A session ID previously obtained from the login module.
columns – A comma-separated list of columns to return. Each column is specified by a numeric column identifier. Column identifiers for appointments are defined in Common object data, Detailed task and appointment data and Detailed appointment data.
recurrence_master – Extract the recurrence to several appointments. The default value is false so every appointment of the recurrence will be calculated.

Request body: An array with full object IDs (folder, id and optionally either recurrence_position or recurrence_date_position) of requested appointments.

Response with timestamp: An array with appointment data. Each array element describes one appointment and is itself an array. The elements of each array contain the information specified by the corresponding identifiers in the columns parameter.

Full identifier for an appointment
Name	Type	Value
id	String	Object ID
pos	Number	Value of the field recurrence_position, if present in the appointment.

Get updated appointments

GET /ajax/calendar?action=updates

Parameters:

session – A session ID previously obtained from the login module.
folder – Object ID of the folder, whose contents are queried.
columns – A comma-separated list of columns to return. Each column is specified by a numeric column identifier. Column identifiers for appointments are defined in Common object data, Detailed task and appointment data and Detailed appointment data.
timestamp – Timestamp of the last update of the requested appointments.
start (optional) – Lower inclusive limit of the queried range as a Date. Only appointments which end on or after this date are returned.
end (optional) – Upper exclusive limit of the queried range as a Date. Only appointments which start before this date are returned.
ignore (mandatory - should be set to "deleted") (deprecated) – Which kinds of updates should be ignored. Currently, the only valid value – "deleted" – causes deleted object IDs not to be returned.
recurrence_master – Extract the recurrence to several appointments. The default value is false so every appointment of the recurrence will be calculated.
showPrivate (optional) – only works in shared folders: When enabled, shows private appointments of the folder owner. Such appointments are anonymized by stripping away all information except start date, end date and recurrence information (since 6.18)

Response with timestamp: An array with new, modified and deleted appointments. New and modified appointments are represented by arrays. The elements of each array contain the information specified by the corresponding identifiers in the columns parameter. Deleted appointments (should the ignore parameter be ever implemented) would be identified by objects described in Full identifier for an appointment instead of arrays. Appointment sequencies are broken up into individual appointments and each modified occurrence of a sequence in the requested range is returned separately. The appointments are sorted in ascending order by the field start_date.

Get an appointment

GET /ajax/calendar?action=get

Parameters:

session – A session ID previously obtained from the login module.
id – Object ID of the requested appointment.
folder – Folder ID of the requested appointment.
recurrence_position (optional) – Recurrence Position requested appointment.

Response with timestamp: An object containing all data of the requested appointment. The fields of the object are listed in Common object data, Detailed task and appointment data and Detailed appointment data. The field id is not included.

Update an appointment

PUT /ajax/calendar?action=update

Parameters:

session – A session ID previously obtained from the login module.
id – Object ID of the updated appointment.
folder - Object ID of the appointment's folder.
timestamp – Timestamp of the updated appointment. If the appointment was modified after the specified timestamp, then the update must fail.

Request body: Appointment object as described in Common object data, Detailed task and appointment data and Detailed appointment data. The field recurrence_id is always present if it is present in the original appointment. The field recurrence_position is present if it is present in the original appointment and only this single appointment should be modified. The field id is not present because it is already included as a parameter. Other fields are present only if modified.

Create an appointment

PUT /ajax/calendar?action=new

Parameters:

session – A session ID previously obtained from the login module.

Request body: Appointment object as described in Common object data, Detailed task and appointment data and Detailed appointment data. The field id is not present.

Response: If the appointment was created successfully, an object with the attribute id of the newly created appointment. If the appointment could not be created due to conflicts, the response body is an object with the field conflicts, which is an array of appointment objects which caused the conflict. Each appointment object which represents a resource conflict contains an additional field hard_conflict with the Boolean value true. If the user does not have read access to a conflicting appointment, only the fields id, start_date, end_date, shown_as and participants are present and the field participants contains only the participants which caused the conflict.

Delete an appointment

PUT /ajax/calendar?action=delete

Parameters:

session – A session ID previously obtained from the login module.
timestamp – Timestamp of the last update of the deleted appointments.

Request body: The appointment object to delete. The fields for the object are described in Full identifier for an appointment.

Response: An array of objects identifying the appointments which were modified after the specified timestamp and were therefore not deleted. The fields of each object are described in Full identifier for an appointment.

Delete appointments (since v6.22)

PUT /ajax/calendar?action=delete

Parameters:

session – A session ID previously obtained from the login module.
timestamp – Timestamp of the last update of the deleted appointments.

Request body: An array of appointment objects to delete. The fields for the object are described in Full identifier for an appointment.

Response: An array of objects identifying the appointments which were modified after the specified timestamp and were therefore not deleted. The fields of each object are described in Full identifier for an appointment.

Confirm appointment

PUT /ajax/calendar?action=confirm

Parameters:

session – A session ID previously obtained from the login module.
id – Object ID of the appointment to confirm.
occurrence – The numeric identifier of the occurrence to which the confirmation applies (in case "id" denotes a series appointment). Available with v7.6.0
folder – ID of the folder through which the appointment is accessed.
timestamp – Timestamp of the last update of the to confirmed appointment.

Request body: An object with the fields "confirmation", "confirmmessage" and "id" (optional) as described in User participant object.

Response: Nothing, except the standard response object with empty data, the timestamp of the confirmed and thereby updated task, and maybe errors.

Free & Busy

GET /ajax/calendar?action=freebusy

Parameters:

session – A session ID previously obtained from the login module.
id - Internal user id. Must be obtained from the contact module.
type - Constant for user or resource (1 for users, 3 for resources)
start – Lower inclusive limit of the queried range as a Date. Only appointments which end on or after this date are returned.
end – Upper exclusive limit of the queried range as a Date. Only appointments which start before this date are returned.

Response: An array of objects identifying the appointments which lie between start and end as described.
This objects consist of:

Name

Type

Value

shown_as

Number

Describes, how this appointment appears in availability queries:

1	reserved
2	temporary
3	absent
4	free

start_date

Date or Time

see Detailed task and appointment data

end_date

Date or Time

see Detailed task and appointment data

id

String

Object ID

folder_id

String

Folder ID. Only set, if the user has the right to see the object. (added 2009-08-18/6.12)

full_time

Boolean

True if the appointment is a whole day appointment, not present otherwise.

Search appointments

PUT /ajax/calendar?action=search

Parameters:

session – A session ID previously obtained from the login module.
columns – The requested fields

Request body: An Object as described in Search appointments.

Search appointments
Name	Type	Value
pattern	String	Search pattern to find appointments. In the pattern, the character "*" matches zero or more characters and the character "?" matches exactly one character. All other characters match only themselves.
startletter	String	Search appointments with the given starting letter.

Request body: An Object as described in Search appointments.

Response: An array with appointment data. Each array element describes one appointment and is itself an array. The elements of each array contain the information specified by the corresponding identifiers in the columns parameter.

Get new appointments

GET /ajax/calendar?action=newappointments

Parameters:

session – A session ID previously obtained from the login module.
columns – The requested fields
start – Lower inclusive limit of the queried range as a Date. Only appointments which end on or after this date are returned.
end – Upper exclusive limit of the queried range as a Date. Only appointments which start before this date are returned.
sort (optional) – The identifier of a column which determines the sort order of the response. If this parameter is specified and holds a column number, then the parameter order must be also specified.
order (optional) – "asc" if the response entires should be sorted in the ascending order, "desc" if the response entries should be sorted in the descending order. If this parameter is specified, then the parameter sort must be also specified.
limit – limits the number of returned object to the given value.

Response: An array with appointment data. Each array element describes one appointment and is itself an array. The elements of each array contain the information specified by the corresponding identifiers in the columns parameter.

Resolve UID

GET /ajax/calendar?action=resolveuid

Parameters

session – A session ID previously obtained from the login module.
uid – The UID to be resolved.

Response: An object object with the field "id" containing the ox-object id, if existing, an error message otherwise.

Get all Change Exceptions (Since v7.2.0)

GET /ajax/calendar?action=getChangeExceptions

Parameters:

session – A session ID previously obtained from the login module.
id – Object id of the appointment series.
folder – Folder ID of the requested appointments.
columns – A comma-separated list of columns to return. Each column is specified by a numeric column identifier.

Response with timestamp: An array with appointment data. Each array element describes one appointment and is itself an array. The elements of each array contain the information specified by the corresponding identifiers in the columns parameter.

Module "mail"

The mail module is used to access mail data.

When mails are stored on an IMAP server, some functionality is not available due to restrictions of the IMAP protocol. Such functionality is marked with "not IMAP".

Get mail count

GET /ajax/mail?action=count

Parameters:

session – A session ID previously obtained from the login module.
folder – Object ID of the folder whose mail count is queried

Response (not IMAP: with timestamp): An integer value representing folder's mail count

Get all mails

GET /ajax/mail?action=all

Parameters:

session – A session ID previously obtained from the login module.
folder – Object ID of the folder, whose contents are queried.
columns – A comma-separated list of columns to return. Each column is specified by a numeric column identifier. Column identifiers for appointments are defined in Detailed mail data.
sort (optional) – The identifier of a column which determines the sort order of the response or the string “thread” to return thread-sorted messages. If this parameter is specified and holds a column number, then the parameter order must be also specified.
order (optional) – "asc" if the response entires should be sorted in the ascending order, "desc" if the response entries should be sorted in the descending order. If this parameter is specified, then the parameter sort must be also specified.
left_hand_limit - A positive integer number to specify the "right-hand" limit of the range to return
right_hand_limit - A positive integer number to specify the "left-hand" limit of the range to return
limit - A positive integer number to specify how many items shall be returned according to given sorting; overrides left_hand_limit/right_hand_limit parameters and is equal to left_hand_limit=0 and right_hand_limit=<limit>

Response (not IMAP: with timestamp): An array with mail data. Each array element describes one mail and is itself an array. The elements of each array contain the information specified by the corresponding identifiers in the columns parameter.

ID Name Type Value

102 color_label Number Color number used by Outlook to label the object. The assignment of colors to numbers is arbitrary and specified by the client. The numbers are integer numbers between 0 and 10 (inclusive).

600 id String Object ID

601 folder_id String Object ID of the parent folder

602 attachment Boolean Specifies whether this mail has attachments.

603 from Array Each element is a two-element array specifying one sender. The first element of each address is the personal name, the second element is the email address. Missing address parts are represented by null values.

604 to Array Each element is a two-element array (see the from field) specifying one receiver.

605 cc Array Each element is a two-element array (see the from field) specifying one carbon-copy receiver.

606 bcc Array Each element is a two-element array (see the from field) specifying one blind carbon-copy receiver.

607 subject String Subject line.

608 size Number Size of the mail in bytes.

609 sent_date Time Date and time as specified in the mail by the sending client.

610 received_date Time Date and time as measured by the receiving server.

611

flags

Number

Various system flags. A sum of zero or more of following values:

1	answered
2	deleted
4	draft
8	flagged
16	recent
32	seen
64	user
256	forwarded

See javax.mail.Flags.Flag for details.

612 level Number Zero-based nesting level in a thread.

613 disp_notification_to String Content of message's header “Disposition-Notification-To”

614

priority

Number

Value of message's “X-Priority” header:

0	No priority
5	Very Low
4	Low
3	Normal
2	High
1	Very High

615 msg_ref String Message reference on reply/forward.

651 flag_seen String Special field to sort mails by seen status

652 account_name String Message's account name.

653 account_id int Message's account identifier. Since v6.20.2

user Array An array with user-defined flags as strings.

headers Object An object with a field for every non-standard header. The header name is the field name. The header value is the value of the field as string.

attachments Array Each element is an attachment as described in Attachment. The first element is the mail text. If the mail has multiple representations (multipart-alternative), then the alternatives are placed after the mail text and have the field disp set to alternative.

nested_msgs Array Each element is a mail object as described in this table, except for fields id, folder_id and attachment.

truncated boolean true/false if the mail content was trimmed. Since v7.6.1

source String RFC822 source of the mail. Only present for action=get&attach_src=true

Attachment
Name	Type	Value
id	String	Object ID (unique only inside the same message)
content_type	String	MIME type
content	String	Content as text. Present only if easily convertible to text.
filename	String	Displayed filename (mutually exclusive with content).
size	Number	Size of the attachment in bytes.
disp	String	Attachment's disposition: null, inline, attachment or alternative.

Get all mail conversations (since v7.x)

GET /ajax/mail?action=threadedAll

Parameters:

session – A session ID previously obtained from the login module.
folder – Object ID of the folder, whose contents are queried.
columns – A comma-separated list of columns to return. Each column is specified by a numeric column identifier. Column identifiers for appointments are defined in Detailed mail data.
sort (optional) – The identifier of a column which determines the sort order of the response or the string “thread” to return thread-sorted messages. If this parameter is specified and holds a column number, then the parameter order must be also specified. Note: Applies only to root-level messages.
order (optional) – "asc" if the response entires should be sorted in the ascending order, "desc" if the response entries should be sorted in the descending order. If this parameter is specified, then the parameter sort must be also specified. Note: Applies only to root-level messages.
includeSent - A boolean value to signal that conversations also include messages taken from special "sent" aka "sent items" folder
left_hand_limit - A positive integer number to specify the "right-hand" limit of the range to return. Note: Applies only to root-level messages.
right_hand_limit - A positive integer number to specify the "left-hand" limit of the range to return. Note: Applies only to root-level messages.
limit - A positive integer number to specify how many items shall be returned according to given sorting; overrides left_hand_limit/right_hand_limit parameters and is equal to left_hand_limit=0 and right_hand_limit=<limit>. Note: Applies only to root-level messages.

Response (not IMAP: with timestamp): An JSON array consisting of JSON objects, each representing a conversation's root message along with its message thread. The root message's JSON object is filled according to specified columns and is enhanced by special "thread" JSON field representing the full message thread (including the root message itself). The "thread" JSON field is a JSON array of JSON objects; each representing a message in the conversation sorted by time-line, also filled with specified columns. E.g.

{
   "flags":32,
   "color_label":0,
   "unreadCount":0,
   "id":"263852",
   "folder_id":"default0/INBOX",
   "thread":[
      {
         "id":"263852",
         "folder_id":"default0/INBOX",
         "flags":32,
         "color_label":0
      },
      {
         "id":"263853",
         "folder_id":"default0/INBOX",
         "flags":32,
         "color_label":0
      },
      {
         "id":"26323",
         "folder_id":"default0/Sent",
         "flags":32,
         "color_label":0
      },
      {
         "id":"263854",
         "folder_id":"default0/INBOX",
         "flags":32,
         "color_label":0
      }
   ]
}

Search mails

PUT /ajax/mail?action=search

Parameters:

session – A session ID previously obtained from the login module.
folder – Object ID of the folder, whose contents are queried.
columns – A comma-separated list of columns to return. Each column is specified by a numeric column identifier. Column identifiers for appointments are defined in Detailed mail data.
sort (optional) – The identifier of a column which determines the sort order of the response or the string “thread” to return thread-sorted messages. If this parameter is specified and holds a column number, then the parameter order must be also specified.
order (optional) – "asc" if the response entires should be sorted in the ascending order, "desc" if the response entries should be sorted in the descending order. If this parameter is specified, then the parameter sort must be also specified.

Request Body: A JSON array of JSON objects each containing the search field and its search pattern: e.g.: [{"col": 612, "pattern": "Joe"}, {"col": 614, "pattern": "Tuesday"}] Supported values for col are 603 to 607 (from, to, cc, bcc and subject) and -1 for full text search.

Response (not IMAP: with timestamp): An array with mail data. Each array element describes one mail and is itself an array. The elements of each array contain the information specified by the corresponding identifiers in the columns parameter.

Get a list of mails

PUT /ajax/mail?action=list

Parameters:

session – A session ID previously obtained from the login module.
columns – A comma-separated list of columns to return. Each column is specified by a numeric column identifier. Column identifiers for mails are defined in Detailed mail data.
headers - (preliminary) A comma-separated list of header names. Each name requests denoted header from each mail

Request body: An array with one object for each requested mail. Each object contains the fields folder and id.

Response (not IMAP: with timestamp): An array with mail data. Each array element describes one mail and is itself an array. The elements of each array contain the information specified by the corresponding identifiers in the columns parameter followed by requested headers.

Copy mails

PUT /ajax/mail?action=copy

Parameters:

session – A session ID previously obtained from the login module.
id – Object ID of the requested mail.
folder – Object ID of the source folder.

Request Body: A JSON object containing the id of the destination folder inside the "folder_id" field: e.g.: {"folder_id": 1376}

Response: A JSON array containing the ID of the copied mail

Move mails

PUT /ajax/mail?action=update

Parameters:

session – A session ID previously obtained from the login module.
id – Object ID of the requested mail.
folder – Object ID of the source folder.

Request Body: A JSON object containing the id of the destination folder inside the "folder_id" field: e.g.: {"folder_id": 1376}

Response: A JSON array containing the ID of the moved mail

Update mails

PUT /ajax/mail?action=update

Parameters:

session – A session ID previously obtained from the login module.
id – Object ID of the requested mail.
message_id – (Preliminary) The value of "Message-Id" header of the requested mail. This parameter is a substitute for "id" parameter.
folder – Object ID of the folder.

Note: If neither parameter "id" nor parameter "message_id" is specified, all folder's messages are updated accordingly. Available with v6.20.

Request Body: A JSON object which carries the new values that ought to be applied to mail as described in Update mail or Update mail extended (available with SP6 v6.10).

Response: A JSON object containing the Object ID of the updated mail and its folder.

Update mail
Name	Type	Value
color_label	Number	The color number between 0 and 10.
flags	Number	A set of flags to add or remove. Note: Flags for "recent" (8) and "user" (64) are ignored.
value	Boolean	`true` to add the flags specified by `flags` (logical OR), `false` to remove them (logical AND with the inverted value).

Update mail extended (available with SP6 v6.10)
Name	Type	Value
set_flags	Number	A set of flags to add. Note: Flags for "recent" (8) and "user" (64) are ignored.
clear_flags	Number	A set of flags to remove. Note: Flags for "recent" (8) and "user" (64) are ignored.

Mark all mails as seen (available with v7.6.0)

PUT /ajax/mail?action=all_seen

Parameters:

session – A session ID previously obtained from the login module.
folder – Object ID of the folder.

Request Body: n.a.

Response: true

Not IMAP: Get updated mails

GET /ajax/mail?action=updates

Parameters:

session – A session ID previously obtained from the login module.

Response: Just an empty JSON array is going to be returned since this action cannot be applied to IMAP.

Get a mail

GET /ajax/mail?action=get

Parameters:

session – A session ID previously obtained from the login module.
id – Object ID of the requested mail.
message_id – (Preliminary) The value of "Message-Id" header of the requested mail. This parameter is a substitute for "id" parameter.
folder – Object ID of the mail's folder.
edit (optional) – 1 indicates that this request should fill the message compose dialog to edit a message and thus display-specific date is going to be withheld.
hdr (optional) – 1 to let the response contain only the (formatted) message headers as plain text
src (optional) – 1 to let the response contain the complete message source as plain text
save (optional) – 1 to write the complete message source to output stream. NOTE: This parameter will only be used if parameter src is set to 1.
view (optional - available with SP4)
- "raw" returns the content as it is, meaning no preparation are performed and thus no guarantee for safe contents is given (available with SP6 v6.10).
- "text" forces the server to deliver a text-only version of the requested mail's body, even if content is HTML.
- "textNoHtmlAttach" is the same as "text", but does not deliver the HTML part as attachment in case of multipart/alternative content.
- "html" to allow a possible HTML mail body being transferred as it is (but white-list filter applied).
- "noimg" to allow a possible HTML content being transferred but without original image src attributes which references external images: Can be used to prevent loading external linked images (spam privacy protection).
- NOTE: if set, the corresponding gui config setting will be ignored.
unseen (optional) – "1" or "true" to leave an unseen mail as unseen although its content is requested
max_size (optional - available since v7.6.1) A positive integer number (greater than 10000) to specify how many characters of the message content will be returned. If the number is smaller than 10000 the value will be ignored and 10000 used.
attach_src (optional - available since v7.6.1) 1 to let the JSON mail representation being extended by "source" field containing the mail raw RFC822 source data

Response (not IMAP: with timestamp): An JSON object containing all data of the requested mail. The fields of the object are listed in Detailed mail data. The fields id and attachment are not included. NOTE: Of course response is not a JSON object if either parameter hdr or parameter src are set to "1". Then the response contains plain text. Moreover if optional parameter save is set to "1" the complete message source is going to be directly written to output stream to open browser's save dialog.

Get multiple mails as a ZIP file

GET /ajax/mail?action=zip_messages

Parameters:

session – A session ID previously obtained from the login module.
folder – The folder identifier.
id – A comma-separated list of Object IDs of the requested mails

Response body: The raw byte data of the ZIP file.

Get a mail attachment

GET /ajax/mail?action=attachment

Parameters:

session – A session ID previously obtained from the login module.
folder – The folder identifier.
id – Object ID of the mail which contains the attachment.
attachment – ID of the requested attachment OR
cid – Value of header 'Content-ID' of the requested attachment
save – 1 overwrites the defined mimetype for this attachment to force the download dialog, otherwise 0.
filter (optional) – 1 to apply HTML white-list filter rules if and only if requested attachment is of MIME type text/htm* AND parameter save is set to 0.

Response body: The raw byte data of the document. The response type for the HTTP Request is set accordingly to the defined mimetype for this attachment, except the parameter save is set to 1.

Get multiple mail attachments as a ZIP file

GET /ajax/mail?action=zip_attachments

Parameters:

session – A session ID previously obtained from the login module.
folder – The folder identifier.
id – Object ID of the mail which contains the attachments.
attachment – A comma-separated list of IDs of the requested attachments

Response body: The raw byte data of the ZIP file.

Send a mail

POST /ajax/mail?action=new

Parameters:

session – A session ID previously obtained from the login module.

Request Body: This method uses the encoding multipart/form-data or multipart/mixed.

The form filed json_0 contains the rudimentary mail as JSON object as described in Detailed mail data with just its message body (as html content) defined in nested JSON array "attachments" and its header data (from, to, subject, etc.). The field "content_type" defines whether the mail ought to be sent as plain text ("text/plain"), as html ("text/html") or as multipart/alternative ("ALTERNATIVE"). Sending a mail requires some special fields inside JSON mail object. The field "infostore_ids" defines a JSON array of infostore document ID(s) that ought to be appended to this mail as attachments. The field "msgref" indicates the ID of the referenced original mail. Moreover the field "sendtype" indicates the type of the message:
- 0 - A normal new mail (optional)
- 1 - A reply mail. The field "msgref" must be present
- 2 - A forward mail. The field "msgref" must be present
- 3 - A draft edit operation. The field "msgref" must be present in order to delete previous draft message since e.g. IMAP does not support changing/replacing a message but requires a delete-and-insert sequence
- 4 - Transport of a draft mail. The field "msgref" must be present
- 6 - This type signals that user intends to send out a saved draft message and expects the draft message (referenced by "msgref" field) being deleted after successful transport

Example of a normal new mail which appends user's VCard and requests a read receipt from receiver:

Content-Disposition: form-data; name="json_0"....{"from":"\u0022Muster, Karl\u0022 <karl.muster@somewhere.com>","to":"someone@somewhere.com","cc":"","bcc":"", "subject":"Mail Subject","priority":"3","disp_notification_to":true,"vcard":1, "attachments":[{"content_type":"ALTERNATIVE","content":"Simple Mail Text!<br><br>\u000a\u000a"}]}

The request accepts file fields in upload form that denote referenced files that are going to be appended as attachments
For "text/plain" mail bodies, the JSON boolean field "raw" may be specified inside the body's JSON representation to signal that the text content shall be kept as-is; meaning to keep all formatting intact

Attach data sources

Moreover the JSON representation may contain data sources which should be appended as file attachments to the mail. Then the mail contains the "datasources" key which is expected to be a JSON array of data source descriptions.

A data source description follows the conversion specification.

For example to attach a file through an URL the field looks like this (available with v6.18.2):

{
 "from": "someone@somewhere.com,
 ...
 "datasources"
 [
  {
   "identifier": "com.openexchange.url.mail.attachment",
   "args":
    {
     "url": <url-string>,
     "timeout": <optional-timeout-millis-int, default is 2500msec>,
     "contentType": <optional-content-type-string>,
     "charset": <optional-charset-string>,
     "size": <optional-size-int>,
     "disposition": <optional-disposition-string>,
     "fileName": <optional-file-name-string>,
    }
  }
 ]
}

Response: Object ID of the newly created mail.

Send/Save mail as MIME data block (RFC822) (added in SP5)

PUT /ajax/mail?action=new

Parameters:

session - A session ID previously obtained from the login module.
folder (optional) - In case the mail should not be sent out, but saved in a specific folder, the "folder" parameter can be used. If the mail should be sent out to the recipient, the "folder" parameter must not be included and the mail is stored in the folder "Sent Items". Example "folder=default.INBOX/Testfolder"
flags (optional) - In case the mail should be stored with status "read" (e.g. mail has been read already in the client inbox), the parameter "flags" has to be included. If no "folder" parameter is specified, this parameter must not be included. For infos about mail flags see Detailed mail data spec.

Request Body: The MIME Data Block

Response: Object ID of the newly created/moved mail.

Import of mails as MIME data block (RFC822) (added with 6.18)

This request can be used to store a single or a lot of mails in the OX mail storage backend. This action should be used instead of action=new because it is faster and tolerant to 8bit encoded emails.

POST /ajax/mail?action=import

Parameters:

session - A session ID previously obtained from the login module.
folder - For the import this parameter is required to specify the folder into that the emails should be imported. Example "folder=default.INBOX/Testfolder"
flags (optional) - In case the mail should be stored with status "read" (e.g. mail has been read already in the client inbox), the parameter "flags" has to be included. For infos about mail flags see Detailed mail data spec.
force (optional) - If this parameter is set to true, the server skips checking the valid From-address

Request Body: A multipart/form-data with a single or multiple file parts each having a different name and containing the RFC822 encoded email as binary data like in a file upload.

Response: A JSON object containing the folder identifier and the object identifier of the imported mail or a JSON array of those JSON objects if multiple mails are imported.

Reply/Forward a mail

GET /ajax/mail?action=reply
GET /ajax/mail?action=replyall
GET /ajax/mail?action=forward

Parameters:

session – A session ID previously obtained from the login module.
id – Object ID of the requested Message.
folder - Object ID of the folder, whose contents are queried.
view (optional - available with SP6) - "text" forces the server to deliver a text-only version of the requested mail's body, even if content is HTML. "html" to allow a possible HTML mail body being transferred as it is (but white-list filter applied).NOTE: if set, the corresponding gui config setting will be ignored.
setFrom (optional - available since v7.6.0) A flag ("true"/"false") that signals if "From" header shall be pre-selected according to a suitable recipient address that matches one of user's E-Mail address aliases; only supported for /ajax/mail?action=replyall and /ajax/mail?action=reply
max_size (optional - available since v7.6.1) A positive integer number (greater than 10000) to specify how many characters of the message content will be returned. If the number is smaller than 10000 the value will be ignored and 10000 used.

Response (not IMAP: with timestamp): An object containing all data of the requested mail. The fields of the object are listed in Detailed mail data. The fields id and attachment are not included.

Delete mails

PUT /ajax/mail?action=delete

Parameters:

session – A session ID previously obtained from the login module.
Not IMAP: timestamp – Timestamp of the last update of the deleted mails.

Request body: An array of objects providing folder IDs and object IDs of the deleted mails. [ { "folder":"default0/INBOX", "id":"123" } ... { "folder":"default0/MyFolder", "id":"134" } ]

Not IMAP: Response: An array with object IDs of mails which were modified after the specified timestamp and were therefore not deleted.

Clear mail folder(s)

PUT /ajax/mail?action=clear

Parameters:

session – A session ID previously obtained from the login module.
Not IMAP: timestamp – Timestamp of the last update of the deleted mails.

Request body: An array with IDs of the mail folders to clear

Response: An array with IDs of mail folder that could not be cleared; meaning the response body is an empty JSON array if everything went well.

Module "groups"

The group module allows to query available groups. It is mainly used by the dialog for the selection of participants.

Get a group

GET /ajax/group?action=get

Parameters:

session – A session ID previously obtained from the login module.
id – The group id.

Response: A group object as described in Group data.

List groups

PUT /ajax/group?action=list

Parameters:

session – A session ID previously obtained from the login module.

Request body: An array with group identifiers.

Response: An array of group objects as described in Group data.

Search for groups

PUT /ajax/group?action=search

Parameters:

session – A session ID previously obtained from the login module.

Request body: An object with search parameters as described in Group search.

Group search
Name	Type	Value
pattern	String	Search pattern to find groups. In the pattern, the character "*" matches zero or more characters and the character "?" matches exactly one character. All other characters match only themselves.

Response with timestamp: An array of group objects as described in Group data.

Group data
Name	Type	Value
id	Number	ID
display_name	String	Display name
name	String	Name with character restrictions
members	Array	The array contains identifier of users that are member of the group.

Create a group

introduced 2008-06-12

PUT /ajax/group?action=new

Parameters:

session – A session ID previously obtained from the login module.

Request body: Group object as described in Group data. The field id is not present.

Response: A json objekt with attribute id of the newly created group.

Delete a group

introduced 2008-06-12

PUT /ajax/group?action=delete

Parameters:

session – A session ID previously obtained from the login module.
timestamp – Timestamp of the last update of the group to delete.

Request body: An object with the field “id” containing the unique identifier of the group.

Response: An empty json array if the group was deleted successfully.

Change a group

introduced 2008-06-12

PUT /ajax/group?action=update

Parameters:

session – A session ID previously obtained from the login module.
id – Object ID of the group to update.
timestamp – Time stamp of the group to update. If the group was modified after the specified time stamp, then the update must fail.

Request body: Group object as described in Group data. Only modified fields are present and the field id is omitted.

Get updates (since v6.18.1)

introduced 2010-09-13

GET /ajax/group?action=updates

Parameters:

session – A session ID previously obtained from the login module.
timestamp – Timestamp of the last update of the requested groups.

Response with timestamp: An array with new, modified and deleted groups. New, modified and deleted groups are represented by JSON objects as described in Group data.

Module "resource"

The resource module allows to query available resources. It is mainly used by the dialog for the selection of participants.

Get all resources

GET /ajax/resource?action=all

Parameters:

session – A session ID previously obtained from the login module.

Response: An array of resource identifier.

List resources

PUT /ajax/resource?action=list

Parameters:

session – A session ID previously obtained from the login module.

Request body: An array with resources ids.

Response: An array of resource objects as described in Resource response.

Get a resource

GET /ajax/resource?action=get

Parameters:

session – A session ID previously obtained from the login module.
id – The resource id.

Response: An array of resource objects as described in Resource response.

Search for resources

PUT /ajax/resource?action=search

Parameters:

session – A session ID previously obtained from the login module.

Request body: An object with search parameters as described in Participant search.

Participant search
Name	Type	Value
pattern	String	Search pattern to find resources. In the pattern, the character "*" matches zero or more characters and the character "?" matches exactly one character. All other characters match only themselves.

Response: An array of resource objects as described in Resource response.

Resource Response
Name	Type	Value
id	Number	ID
display_name	String	Display name
name	String	internal name
mailaddress	String	email address
availability	Boolean	can be false to mark the resource currently unavailable
description	String	description of the resource
last_modified	Time	Date and time of the last modification.
last_modified_utc	Timestamp	Date and time of the last modification.

Create a resource

PUT /ajax/resource?action=new

Parameters:

session – A session ID previously obtained from the login module.

Request body: Resource object as described in Resource response. The field id is not present.

Response: An object with attribute id of the newly created resource.

Delete a resource

PUT /ajax/resource?action=delete

Parameters:

session – A session ID previously obtained from the login module.
timestamp – Timestamp of the last update of the resource to delete.

Request body: An object with the field “id” containing the unique identifier of the resource.

Response: An empty json array if the resource was deleted successfully.

Delete resources (since v6.22)

PUT /ajax/resource?action=delete

Parameters:

session – A session ID previously obtained from the login module.
timestamp – Timestamp of the last update of the resource to delete.

Request body: An array of objects with the field “id” containing the unique identifier of the resource.

Response: An empty json array if the resources were deleted successfully.

Change a resource

PUT /ajax/resource?action=update

Parameters:

session – A session ID previously obtained from the login module.
id – Object ID of the resource to update.
timestamp – Time stamp of the resource to update. If the resource was modified after the specified time stamp, then the update must fail.

Request body: Resource object as described in Resource response. Only modified fields are present and the field id is omitted.

Get updates (since v6.18.1)

introduced 2010-09-13

GET /ajax/resource?action=updates

Parameters:

session – A session ID previously obtained from the login module.
timestamp – Timestamp of the last update of the requested resources.

Response with timestamp: An array with new, modified and deleted resources. New, modified and deleted resources are represented by JSON objects as described in Resource response.

Module "infostore" or "Filestore" or "Files" or "Drive"

This module has been renamed quite often. Whatever its name, it combines the knowledge database, bookmarks and document storage.

Get all infoitems

GET /ajax/infostore?action=all

Parameters:

session – A session ID previously obtained from the login module.
folder – Object ID of the folder, whose contents are queried.
columns – A comma-separated list of columns to return. Each column is specified by a numeric column identifier. Column identifiers for infoitems are defined in Common object data and Detailed infoitem data.
sort (optional) – The identifier of a column which determines the sort order of the response. If this parameter is specified, then the parameter order must be also specified.
order (optional) – "asc" if the response entires should be sorted in the ascending order, "desc" if the response entries should be sorted in the descending order. If this parameter is specified, then the parameter sort must be also specified.

Response with timestamp: An array with infoitem data. Each array element describes one infoitem and is itself an array. The elements of each array contain the information specified by the corresponding identifiers in the columns parameter.

Detailed infoitem data
ID	Name	Type	Value
108	object_permissions	Array	Each element is an object described in Object Permission object (preliminary, available with 7.8.0).
109	shareable	Boolean	(read-only) Indicates if the item can be shared (preliminary, available with 7.8.0).
700	title	String	Title
701	url	String	Link/URL
702	filename	String	Displayed filename of the document.
703	file_mimetype	String	MIME type of the document. The client converts known types to more readable names before displaying them.
704	file_size	Number	Size of the document in bytes.
705	version	Number	Version number of the document. New documents start at 1. Every update increments the version by 1.
706	description	String	Description
707	locked_until	Time	The time until which this item will presumably be locked. Only set if the docment is currently locked, 0 otherwise.
708	file_md5sum	String	MD5Sum of the document. Not yet implemented, so this is currently always empty.
709	version_comment	String	A version comment is used to file a changelog for the file.
710	current_version	Boolean	“true” if this version is the current version “false” otherwise. Note: This is not writeable
711	number_of_versions	Number	The number of all versions of the infoitem. Note: This is not writeable.
7010	com.openexchange.share.extendedObjectPermissions	Array	Each element is an object described in Extended object permission object. Read Only, Since 7.8.0.

Object Permission object
Name	Type	Value
bits	Number	A number as described in Object Permission flags.
entity	Number	User ID of the user or group to which this permission applies.
group	Boolean	true if entity refers to a group, false if it refers to a user.
type	String	The recipient type, i.e. one of "guest", "anonymous" (required if no internal "entity" defined).
password	String	An additional secret / pin number an anonymous user needs to enter when accessing the share (for type "anonymous", optional) .
email_address	String	The e-mail address of the recipient (for type "guest").
display_name	String	The display name of the recipient (for type "guest", optional).
contact_id	String	The object identifier of the corresponding contact entry if the recipient was chosen from the address book (for type "guest", optional).
contact_folder	String	The folder identifier of the corresponding contact entry if the recipient was chosen from the address book (for type "guest", required if "contact_id" is set).
expiry_date	Time	The end date / expiration time after which the share link is no longer accessible (for type "guest" or "anonymous", optional).

Extended object permission object
Name	Type	Value
entity	Number	Identifier of the permission entity (i.e. user-, group- or guest-ID).
bits	Number	A number as described in Object Permission flags.
type	String	"user" for an internal user, "group" for a group, "guest" for a guest, or "anonymous" for an anonymous permission entity.
display_name	String	A display name for the permission entity.
contact	Object	A (reduced) set of Detailed contact data for "user" and "guest" entities.
share_url	String	The share link for "guest" and "anonymous" entities.
password	String	The optionally set password for "anonymous" entities.
expiry	Date	The optionally set expiry date for "anonymous" entities.

Object Permission flags
Bits	Value
0	The numerical value indicating no object permissions.
1	The numerical value indicating read object permissions.
2	The numerical value indicating write object permissions. This implicitly includes the “read” permission (this is no bitmask).
4	The numerical value indicating delete object permissions. This implicitly includes the “read” and “write” permission (this is no bitmask).

Get a list of infoitems

PUT /ajax/infostore?action=list

Parameters:

session – A session ID previously obtained from the login module.
columns – A comma-separated list of columns to return. Each column is specified by a numeric column identifier. Column identifiers for infoitems are defined in Common object data and Detailed infoitem data.

Request body: An array with object IDs of requested infoitems.

Response with timestamp: An array with infoitem data. Each array element describes one infoitem and is itself an array. The elements of each array contain the information specified by the corresponding identifiers in the columns parameter.

Get updated infoitems

GET /ajax/infostore?action=updates

Parameters:

session – A session ID previously obtained from the login module.
folder – Object ID of the folder, whose contents are queried.
columns – A comma-separated list of columns to return. Each column is specified by a numeric column identifier. Column identifiers for infoitems are defined in Common object data and Detailed infoitem data.
sort (optional) – The identifier of a column which determines the sort order of the response. If this parameter is specified, then the parameter order must be also specified.
order (optional) – "asc" if the response entires should be sorted in the ascending order, "desc" if the response entries should be sorted in the descending order. If this parameter is specified, then the parameter sort must be also specified.
timestamp – Timestamp of the last update of the requested infoitems.
ignore (optional) – Which kinds of updates should be ignored. Currently, the only valid value – "deleted" – causes deleted object IDs not to be returned.

Response with timestamp: An array with new, modified and deleted infoitems. New and modified infoitems are represented by arrays. The elements of each array contain the information specified by the corresponding identifiers in the columns parameter. Deleted infoitems (should the ignore parameter be ever implemented) would be identified by their object IDs as plain strings, without being part of a nested array.

Get an infoitem

GET /ajax/infostore?action=get

Parameters:

session – A session ID previously obtained from the login module.
id – Object ID of the requested infoitem.
version (optional) – If present the infoitem data describes the given version. Otherwise the current version is returned

Response with timestamp: An object containing all data of the requested infoitem. The fields of the object are listed in Common object data and Detailed infoitem data. The field id is not included.

Search infoitems

PUT /ajax/infostore?action=search

Parameters:

session – A session ID previously obtained from the login module.
columns – The requested fields as per tables Common object data and Detailed infoitem data.
sort (optional) – The identifier of a column which determines the sort order of the response. If this parameter is specified, then the parameter order must be also specified.
order (optional) – "asc" if the response entires should be sorted in the ascending order, "desc" if the response entries should be sorted in the descending order. If this parameter is specified, then the parameter sort must be also specified.
start (optional) – The start index (inclusive) in the ordered search, that is requested.
end (optional) – The last index (inclusive) from the ordered search, that is requested.

Request body: An Object as described in Search contacts.

Get an infoitem document

GET /ajax/infostore/[filename]?action=document

Parameters:

session – A session ID previously obtained from the login module.
id – Object ID of the requested infoitem.
folder – Object ID of the infoitem's folder.
version (optional) – If present the infoitem data describes the given version. Otherwise the current version is returned
content_type(optional) – If present the response declares the given content_type in the Content-Type header.

Response body: The raw byte data of the document. The response type for the HTTP Request is set accordingly to the defined mimetype for this infoitem or the content_type given.

Note: The Filename may be added to the customary infostore path to suggest a filename to a Save-As dialog.

Get a ZIP archive containing the infoitems of a denoted folder (available with v7.6.1)

GET /ajax/infostore/[filename]?action=zipfolder

Parameters:

session – A session ID previously obtained from the login module.
folder – Object ID of the infoitem's folder.
recursive – true to also include subfolders and their infoitems respectively; otherwise false to only consider the infoitems of specified folder

Response body: The raw byte data of the ZIP archive. The response type for the HTTP Request is set to application/zip.

Get all versions

GET /ajax/infostore?action=versions

Parameters:

session – A session ID previously obtained from the login module.
id – Object ID of the infoitem whose versions are requested.
columns – A comma-separated list of columns to return. Each column is specified by a numeric column identifier. Column identifiers for infoitems are defined in Common object data and Detailed infoitem data.
sort (optional) – The identifier of a column which determines the sort order of the response. If this parameter is specified, then the parameter order must be also specified.
order (optional) – "asc" if the response entires should be sorted in the ascending order, "desc" if the response entries should be sorted in the descending order. If this parameter is specified, then the parameter sort must be also specified.

Response with timestamp: An array with infoitem data. Each array element describes one infoitem and is itself an array. The elements of each array contain the information specified by the corresponding identifiers in the columns parameter. The timestamp is the timestamp relating to the requested infostore item.

Get multiple documents as a ZIP archive (available with v7.4.0)

GET /ajax/infostore?action=zipdocuments

Parameters:

session – A session ID previously obtained from the login module.
body – A URL-encoded JSON array; see below for details

Parameter body: A JSON array of JSON object tuples specifying the documents' versions to include in the requested ZIP archive; e.g

[{"id":"61820","folder":"70303"},{"id":"61821","folder":"70303", "version": "1"}]

The field "version" is optional; if missing it refers to latest/current version.
So, a valid parameter would look like:

...&body=%5B%7B%22id%22%3A%2261820%22%2C%22folder%22%3A%2270303%22%7D%2C%7B%22id%22%3A%2261821%22%2C%22folder%22%3A%2270303%22%2C%22version%22%3A%221%22%7D%5D

Response: The download offer for the requested ZIP archive containing specified document versions

Update an infoitem via PUT

PUT /ajax/infostore?action=update

Parameters:

session – A session ID previously obtained from the login module.
id – Object ID of the updated infoitem.
timestamp – Timestamp of the updated infoitem. If the infoitem was modified after the specified timestamp, then the update must fail.

Request body: Infoitem object as described in Common object data and Detailed infoitem data. Only modified fields are present.

Update an infoitem via POST

POST /ajax/infostore?action=update

Parameters:

session – A session ID previously obtained from the login module.
id – Object ID of the updated infoitem.
timestamp – Timestamp of the updated infoitem. If the infoitem was modified after the specified timestamp, then the update must fail.
json - Infoitem object as described in Common object data and Detailed infoitem data. Only modified fields are present.
file – File Metadata as per <input type=”file” />

Request Body: Body of content-type “multipart/form-data” or “multipart/mixed” containing the above mentioned fields and file-data.

Response: The response is sent as a HTML document (see introduction).

Create an infoitem via PUT

PUT /ajax/infostore?action=new

Parameters:

session – A session ID previously obtained from the login module.

Request body: Infoitem object as described in Common object data and Detailed infoitem data. The field id is not included.

Response: Object ID of the newly created infoitem.

Create an infoitem via POST

POST /ajax/infostore?action=new

Parameters:

session – A session ID previously obtained from the login module.
json - Infoitem object as described in Common object data and Detailed infoitem data. The field id is not included.
file – File metadata as per <input type=”file” />

Request Body: Body of content-type “multipart/form-data” or “multipart/mixed” containing the above mentioned fields and file-data.

Response: Object ID of the newly created infoitem. The response is sent as a HTML document (see introduction).

Save an attachment in the infostore

PUT /ajax/infostore?action=saveAs

Parameters:

session – A session ID previously obtained from the login module.
attached – The Object ID of the Object with the attachment
folder – The Folder ID of the Object with the attachment
module – The Module type of the Object with the attachment.
Attachment – The id of the attachement to save.

Request body: Infoitem object as described in Common object data and Detailed infoitem data. The field id is not included. The fields in this infoitem object override values from the attachment. The folder_id must be given.

Response: Object ID of the newly created infoitem.

Delete infoitems

PUT /ajax/infostore?action=delete

Parameters:

session – A session ID previously obtained from the login module.
timestamp – Timestamp of the last update of the deleted infoitems.
hardDelete - Optional, defaults to \"false\". If set to \"true\", the file is deleted permanently. Otherwise, and if the underlying storage supports a trash folder and the file is not yet located below the trash folder, it is moved to the trash folder.

Request body: An array with objects to delete. The fields for the object are described in Full identifier for an infostore document.

Response: An array with [[]].

Full identifier for an infostore document
Name	Type	Value
id	Number	Object ID
folder	Number	Folder ID

Delete versions of infostore documents

PUT /ajax/infostore?action=detach

Parameters:

session – A session ID previously obtained from the login module.
id – The ID of the base Object
folder – The Folder of the Object
timestamp - Timestamp of the infostore object

Request body: A List of arrays with the version numbers of the infoitems to detach.

Response: An array with version numbers that were not deleted.

Note: When the current version of a document is deleted the new current version will be the newest version.

Delete all versions of infostore documents

PUT /ajax/infostore?action=revert

Parameters:

session – A session ID previously obtained from the login module.
id – The ID of the base Object
folder – The Folder of the Object
timestamp - Timestamp of the infostore object

Removes all versions of the infostore document leaving only the base object.

Copy an infostore document via PUT

PUT /ajax/infostore?action=copy

Parameters:

session – A session ID previously obtained from the login module.
id – The ID of the base Object
folder – The Folder of the Object
timestamp - Timestamp of the infostore object

Request body: Infoitem object as described in Common object data and Detailed infoitem data. Only modified fields are present.

Response: The id of the newly created object

Note: Only the fields (and the file) of the current document will be copied. Those fields present in the request are modified accordingly.

Copy an infostore document via POST

POST /ajax/infostore?action=copy

Parameters:

session – A session ID previously obtained from the login module.
id – Object ID of the updated infoitem.
timestamp – Timestamp of the updated infoitem. If the infoitem was modified after the specified timestamp, then the update must fail.
json - Infoitem object as described in Common object data and Detailed infoitem data. Only modified fields are present.
file – File Metadata as per <input type=”file” />

Request Body: Body of content-type “multipart/form-data” or “multipart/mixed” containing the above mentioned fields and file-data.

Response: The response is sent as a HTML document (see introduction).

Note: Only the fields (and the file) of the current document will be copied. Those fields present in the request are modified accordingly.

Lock an infoitem

GET /ajax/infostore?action=lock

Parameters:

session – A session ID previously obtained from the login module.
id – Object ID of the infoitem that should be locked.
diff (optional) – If present the value is added to the current time on the server (both in ms). The document will be locked until that time. If this parameter is not present, the document will be locked for a duration as configured on the server.

Response with timestamp: Can only include errors.

Unlock an infoitem

GET /ajax/infostore?action=unlock

Parameters:

session – A session ID previously obtained from the login module.
id – Object ID of the infoitem that should be unlocked.

Response with timestamp: Can only contain errors.

Get shared infoitems (Since 7.8.0, Preliminary)

GET /ajax/infostore?action=shares

Parameters:

session – A session ID previously obtained from the login module.
columns – A comma-separated list of columns to return. Each column is specified by a numeric column identifier. Column identifiers for infoitems are defined in Common object data and Detailed infoitem data.
sort (optional) – The identifier of a column which determines the sort order of the response. If this parameter is specified, then the parameter order must be also specified.
order (optional) – "asc" if the response entires should be sorted in the ascending order, "desc" if the response entries should be sorted in the descending order. If this parameter is specified, then the parameter sort must be also specified.

Response: An array with infoitem data. Each array element describes one infoitem and is itself an array. The elements of each array contain the information specified by the corresponding identifiers in the columns parameter.

Module "Attachments"

The Attachment Module allows file attachments to arbitrary objects. An Attachment always belongs to an object (called 'attached') in a certain folder of a certain module.

Get All Attachments for an Object

GET /ajax/attachment?action=all

Parameters:

session – A session ID previously obtained from the login module.
attached – The Object ID of the Object
folder – The Folder ID of the Object
module – The Module type of the Object
columns – A comma-separated list of columns to return. Each column is specified by a numeric column identifier. Column identifiers for attachment's are defined in Common object data (with only id, created_by and creation_date available) and Attachment object.
sort (optional) – The identifier of a column which determines the sort order of the response. If this parameter is specified, then the parameter order must be also specified.
order (optional) – "asc" if the response entires should be sorted in the ascending order, "desc" if the response entries should be sorted in the descending order. If this parameter is specified, then the parameter sort must be also specified.

Response: An array with attachment data. Each array element describes one attachment and is itself an array. The elements of each array contain the information specified by the corresponding identifiers in the columns parameter.

Get a list of attachments

PUT /ajax/attachment?action=list

Parameters:

session – A session ID previously obtained from the login module.
columns – A comma-separated list of columns to return. Each column is specified by a numeric column identifier. Column identifiers for attachments are defined in Common object data (with only id, created_by and creation_date available) and Attachment object.
attached – The Object ID of the Object
folder – The Folder ID of the Object
module – The Module type of the Object

Request body: An array of with object IDs of requested tasks.

Response with timestamp: An array with attachment data. Each array element describes one attachment and is itself an array. The elements of each array contain the information specified by the corresponding identifiers in the columns parameter.

Create an Attachment

POST /ajax/attachment?action=attach

Parameters:

session – A session ID previously obtained from the login module.
json_[index] – The JSON representation of an attachment object as described in Common object data (with only id, created_by and creation_date available) and Attachment object.
file_[index] – The file metadata as per <input type=file /> upload.

Note: The JSON Object and file fields describe the corresponding attachment. For ex.: json_0 contains metadata for file_0, json_1 for file_1 and so on. Indexes start with 0.

Request body: multipart/form-data or multipart/mixed containing the file data of the attached file and the above fields.

Response: HTML page with javascript callback as per introduction. Contains a JSON-Array of ids of the newly created attachments. The order of the ids corresponds to the indexes in the request.

Attachment Object

ID

Name

Type

Description

800

folder

Number

The ID of the first Folder in which the attached object resides.

801

attached

Number

The object id of the object this attachement is attached to.

802

module

Number

The Module of this Object Possible Values:

1	Appointment
4	Task
7	Contact
137	Infostore

803

filename

String

The filename of the attached file.

804

file_size

Number

The file size (in bytes) of the attached file.

805

file_mimetype

String

The MIME-Type of the attached file

806

rft_flag

Boolean

If the attachment is a RTF Attachment of Outlook. (Outlook descriptions can be stored as RTF Documents).

Delete Attachment

PUT /ajax/attachment?action=detach

Parameters:

session – A session ID previously obtained from the login module.
attached – The ID of the base Object
module – The type of the Object
folder – The Folder of the Object

Request body: An array with the ids of the attachments to delete.

Get updated attachments

GET /ajax/attachment?action=updates

Parameters:

session – A session ID previously obtained from the login module.
folder – Object ID of the folder, whose contents are queried.
attached – Object ID of the object to which the attachments are attached.
module – Module ID (as per Attachment object) of the attached object.
columns – A comma-separated list of columns to return. Each column is specified by a numeric column identifier. Column identifiers for attachments are defined in Common object data (with only id, created_by and creation_date available) and Attachment object.
sort (optional) – The identifier of a column which determines the sort order of the response. If this parameter is specified, then the parameter order must be also specified.
order (optional) – "asc" if the response entires should be sorted in the ascending order, "desc" if the response entries should be sorted in the descending order. If this parameter is specified, then the parameter sort must be also specified.
timestamp – Timestamp of the last update of the requested infoitems.

ignore (optional) – Which kinds of updates should be ignored. Currently, the only valid value – "deleted" – causes deleted object IDs not to be returned.

Response with timestamp: An array with new and deleted attachments for the specified object. New attachments are represented by arrays. The elements of each array contain the information specified by the corresponding identifiers in the columns parameter. Deleted attachments (should the ignore parameter be ever implemented) would be identified by their object IDs as plain numbers, without being part of a nested array.

Get an attachment

GET /ajax/attahment?action=get

Parameters:

session – A session ID previously obtained from the login module.
folder – Object ID of the folder, whose contents are queried.
attached – Object ID of the object to which the attachments are attached.
module – Module ID (as per Attachment object) of the attached object.
id – Object ID of the requested attachment.

Response with timestamp: An object containing all data of the requested attachment. The fields of the object are listed in Common object data (with only id, created_by and creation_date available) and Attachment object.

Get an attachments filedata

GET /ajax/attachment/[filename]?action=document

Parameters:

session – A session ID previously obtained from the login module.
folder – Object ID of the folder, whose contents are queried.
attached – Object ID of the object to which the attachments are attached.
module – Module ID (as per Attachment object) of the attached object.
id – Object ID of the requested attachment.
content_type (optional) – If set the responses Content-Type header is set to this value, not the attachements file mime type.

Response body: The raw byte data of the document. The response type for the HTTP Request is set accordingly to the defined mimetype for this infoitem. Note: The Filename may be added to the customary infostore path to suggest a filename to a Save-As dialog.

Module "reminder"

The reminder module provides the ability to fetch all active reminders for a user between two dates.

Get reminder range

GET /ajax/reminder?action=range

Parameters:

session – A session ID previously obtained from the login module.
end – The End date of the reminder range

Response: An Array with all reminders which are scheduled until the specified time. Each reminder is described in Reminder response.

Reminder response
Field	Type	Description
id	Number	The ID of the reminder.
target_id	Number	The target_id where this reminder is attached to
alarm	Time	The time of the alarm
module	Number	The module of the reminder
servertime	Time	The time on the server
user_id	Number	The ID of the user.
last_modified	Time	The last modification timestamp of the reminder
recurrence_position	Number	The recurrence position for series appointments or 0 if no series
folder	Number	The ID of the folder through that the object can be read

Delete a Reminder

PUT /ajax/reminder?action=delete

Parameters:

session – A session ID previously obtained from the login module.

Request body: An object with the field “id”.

Response body: An JSON array with the id that was not deleted.

Delete Reminders (since v6.22)

PUT /ajax/reminder?action=delete

Parameters:

session – A session ID previously obtained from the login module.

Request body: An array of objects with the field “id”.

Response body: An JSON array with the ids that were not deleted.

Remind again (since v6.18.1)

PUT /ajax/reminder?action=remindAgain

Parameters:

session – A session ID previously obtained from the login module.
id – The ID of the reminder whose date shall be changed.

Request body: The JSON representation of the reminder; mainly containing the field “alarm” which provides the new reminder date.
E.g. { "alarm": 1283418027381 }

Response body: The JSON representation of the updated reminder.

Module "multiple"

The multiple module allows to bundle multiple requests to most other modules in a single request. Not supported are:

modules login and multiple,
POST requests with a multipart encoding (uploads),
GET requests which do not use an object as described in Response body as response body (downloads).

Multiple requests

PUT /ajax/multiple

Parameters:

session – A session ID previously obtained from the login module.
continue – Specifies whether processing of requests should stop when an error occurs, or whether all request should be processed regardless of errors.

Request body: An array with request objects. Each request object contains all URI parameters of the "normal" request as fields. The module name of the "normal" request is included in the field module. The parameter session is not included. If the "normal" request has a request body, the object which is represented by that request body is includes as the value of the field data.

Response: An array with reply objects as described in Response body. The order of reply objects corresponds to the order of requests in the request body. Unlike with all other modules, this response is itself not part of a response object as described in Response body.

Module "quota"

The filestore module allows accesssing information about the use and quota of the filestore.

Get quota information (Since 7.6.1, Preliminary)

GET /ajax/quota?action=get

Parameters:

session – A session ID previously obtained from the login module.
module (optional) – The module identifier to get quota information for, required if account is set.
account (optional) – The account identifier within the module to get quota information for.

Response: A JSON object containing the requested quota information. If no module was specified, all defined module quotas are set in the JSON object, each one mapped to it's module identifier. If the quota from a module was requested, a JSON array containing all account quotas of this module are returned. If both a module and account were requested, a JSON object representing this specific account auota is returned.

Note: In case there is no quota limitation defined for a module or account, no corresponding JSON object is included in the response.

Module Quota
Field	Type	Description
display_name	String	The display name of the module
accounts	Array	Each element identifies an account quota within the module, as described in Account Quota

Account Quota
Field	Type	Description
account_id	String	Identifier of the account
account_name	String	Name of the account
countquota	Number	The account's quota limit for the number of items, or not set if not defined
countuse	Number	The account's actual usage for the number of items, or not set if no count quota defined
quota	Number	The account's quota limit for the storage in bytes, or not set if not defined
use	Number	The account's actual usage for the storage in bytes, or not set if no storage quota defined

Get the filestore usage data

GET /ajax/quota?action=filestore

Parameters:

session – A session ID previously obtained from the login module.

Response: A JSON Object containing the fields “use” and “quota”. “use” represents the uploaded files sizes sum and the field “quota” represents the maximum.

Get the mail usage data

GET /ajax/quota?action=mail

Parameters:

session – A session ID previously obtained from the login module.

Response: A JSON Object containing the fields “use” and “quota”. “use” represents the use mail quota and the field “quota” represents the maximum. -1 represents an unlimited quota.

Module "import"

The module import allows to import specific module data (like Contacts, Tasks or Appointments) in several formats (iCal, vCard, CSV) into a folder. Please note: The callback for all actions of this bundle is callback_import, not callback_$actionname for legacy purposes.

Import CSV

POST /ajax/import?action=CSV

Parameters:

session – A session ID previously obtained from the login module.
folder – ObjectID of the folder into which data should be imported. This must be a Contact folder.
charset (preliminary, since 7.6.2) – Optional. A fixed character encoding to use when parsing the uploaded file, overriding the built-in defaults, following the conventions documented in RFC 2278.

Request body: A "multipart/form-data" encoded .CSV file. The field name for the file is "file". The column titles of the table are those used within the OX, see column Displayed Name in #DetailedContactData.

Response: An array of JSON-Objects, one for each entry in the list, containing: The Object ID of the entry, the Object ID of the folder the data was written into, a timestamp of the modification (in case of error, of modification attempt) and an error in case the data could not be entered.

Import Outlook CSV

POST /ajax/import?action=OUTLOOK_CSV

Parameters:

session – A session ID previously obtained from the login module.
folder – ObjectID of the folder into which data should be imported. This must be a Contact folder.
charset (preliminary, since 7.6.2) – Optional. A fixed character encoding to use when parsing the uploaded file, overriding the built-in defaults, following the conventions documented in RFC 2278.

Request body: An .CSV file with Windows' default encoding Windows-1252. The column titles of the table may be those used by the English, French or German version of Outlook.

Response: An array of JSON-Objects, one for each entry in the list, containing: The Object ID of the entry, the Object ID of the folder the data was written into, a timestamp of the modification (in case of error, of modification attempt) and an error in case the data could not be entered.

Import iCAL

POST /ajax/import?action=ICAL

Parameters:

session – A session ID previously obtained from the login module.
folder – ObjectID of the folder into which data should be imported. This may be an Appointment or a Task folder. May even be a list containing both.
suppressNotification – This optional parameter can be used to disable the notifications for new appointments that are imported through the given iCal file. This help keeping the Inbox clean if a lot of appointments need to be imported. The value of this parameter does not matter because only for the existence of the parameter is checked.
ignoreUIDs – Optional. When set to "true", UIDs are partially ignored during import of tasks and appointments from iCal. Internally, each UID is replaced statically by a random one to preserve possibly existing relations between recurring appointments in the same iCal file, but at the same time to avoid collisions with already existing tasks and appointments.

Request body: An iCalendar file.

Response: An array of JSON-Objects, one for each entry in the list, containing: The Object ID of the entry, the Object ID of the folder the data was written into, a timestamp of the modification (in case of error, of modification attempt) and an error in case the data could not be entered, and warnings (under the key "warnings") containing an Array of objects with the warning data, containing all customary error fields.

Import vCard

POST /ajax/import?action=VCARD

Parameters:

session – A session ID previously obtained from the login module.
folder – ObjectID of the folder into which data should be imported. This must be a Contact folder.

Request body: An vCard file, maybe of the formats: vCard 2.1, vCard 3.0 or vCalendar 1.0

Response: An array of JSON-Objects, one for each entry in the list, containing: The Object ID of the entry, the Object ID of the folder the data was written into, a timestamp of the modification (in case of error, of modification attempt) and an error in case the data could not be entered.

Module "export"

The module export allows to export specific module data (like Contacts, Tasks or Appointments) from a folder in several formats (iCal, vCard, CSV).

Exporting CSV

GET /ajax/export?action=CSV

Parameters:

session – A session ID previously obtained from the login module.
folder – ObjectID of the folder whose contents are to be exported. This must be a Contact folder.
columns – (optional) Columns to be imported from the given file, given as an array of column numbers. See Detailed contact data for numbers.
export_dlists – (optional) toggles whether distribution lists are exported, too. Default is false. Option exists since 7.4.1.

Response: An InputStream containing the file of the MIME type text/csv.

Exporting iCAL

GET /ajax/export?action=ICAL

Parameters:

session – A session ID previously obtained from the login module.
folder – ObjectID of the folder whose contents are to be exported. This must be a Calendar folder.

Response: An InputStream containing the file, of the MIME type text/calendar.

Exporting vCard

GET /ajax/export?action=VCARD

Parameters:

session – A session ID previously obtained from the login module.
folder – ObjectID of the folder whose contents are to be exported. This must be a Contact folder.

Response: An InputStream containing the file, of the MIME type text/x-vcard.

Module "sync"

The module sync delivers several core API extensions to support common operations used in a mobile synchronization environment.

Clearing a folder's content

PUT /ajax/sync?action=refresh_server

Parameters:

session – A session ID previously obtained from the login module.

Request body: A JSON array containing the folder ID(s) whose content should be cleared. NOTE: Although the requests offers to clear multiple folders at once it is recommended to clear only one folder per request since if any exception occurs (e.g. missing permissions) the complete request is going to be aborted.

Response: A JSON array containing the IDs of folders that could not be cleared due to a concurrent modification. Meaning you receive an empty JSON array if everything worked well.

Module "token" (since 7.4.0)

The module token delivers several core API extensions to support token based logins.

Get a login token

GET /ajax/token?action=acquireToken

Parameters:

session – A session ID previously obtained from the login module.

Response: A JSON object with the timestamp of the creation date and a token which can be used to create a new session.

Module "mailfilter"

The module mailfilter describes how to add, update or delete mail filter rules or to check which actions are supported by the underlying system.

A detailed description can be found here Mail Filter HTTP API

Module "ajax file upload"

This module offers to store files in server's dedicated download directory for a configureable amount of time. The files are then accessible for further operations like inline images in (html) mails

Uploading a file

POST /ajax/file?action=new

Parameters:

session – A session ID previously obtained from the login module.
module – The module for which the file is uploaded to determine proper upload quota constraints (e.g. "mail", "infostore", etc.).
type – The file type filter to define which file types are allowed during upload. Currently supported filters are: file=all, text=text/*, media=image OR audio OR video, image=image/*, audio=audio/*, video=video/*, application=application/*

Request body: A common POST request body of MIME type "multipart/*" which holds the file(s) to upload

Response: A JSON array containing the IDs of the uploaded files. The files are accessible through the returned IDs for future use.

Updating a file's last access timestamp (keep alive)

By updating the last access timestamp it's prevented from being deleted from both session and disk storage.

GET /ajax/file?action=keepalive

Parameters:

session – A session ID previously obtained from the login module.
id – The ID of the uploaded file whose timestamp should be updated

Response: The string "null" in response's data element

Requesting a formerly uploaded file

GET /ajax/file?action=get

Parameters:

session – A session ID previously obtained from the login module.
id – The ID of the uploaded file

Response: The content of the requested file is directly written into output stream

Module "image"

This module allows to download images from Open-Xchange server without providing a session ID in request's URL parameters.

Requesting an image

Open-Xchange Server supports multiple image sources that are identified through request's path identifier

Inline images from mails
- Request path needs to be "/mail/picture"
Contact profile image
- Request path needs to be "/contact/picture"
User profile image
- Request path needs to be "/user/picture"
MP3 cover image
- Request path needs to be "/file/mp3cover"
Fetch a previously uploaded image using "/ajax/file" interface
- Request path needs to be "/mfile/picture"

Each image source requires an individual set of required parameters

Inline images from mails

GET /mail/picture

Parameters:

accountId – The mail account identifier
folder – The identifier of the folder in which the mail resides
id – The mail identifier
uid – The identifier of the image inside the referenced mail

Response: The content of the requested image is directly written into output stream

Contact profile images

GET /contact/picture

Parameters:

folder – The identifier of the folder in which the contact resides
id – The contact identifier

Response: The content of the requested image is directly written into output stream

User profile images

GET /user/picture

Parameters:

id – The user identifier

Response: The content of the requested image is directly written into output stream

MP3 cover image

GET /file/mp3cover

Parameters:

id – The identifier of the uploaded image

Response: The content of the requested image is directly written into output stream

Managed Image File

GET /image/mfile/picture

Parameters:

uid – The identifier of the uploaded image

Response: The content of the requested image is directly written into output stream

Module "conversion" (preliminary)

A generic module to request data from a data source and to process obtained/submitted data with a data handler. Thus data is converted from a data source by a data handler.

Converting data

PUT /ajax/conversion?action=convert
or
POST /ajax/conversion?action=convert

Parameters: <no parameters required>

Request body: A conversion request JSON object containing nested JSON objects for data source and data handler

Conversion request object
Field	Type	Description
datasource	JSON object	The data source object.
datahandler	JSON object	The data handler object.

Data source object
Field	Type	Description
identifier	String	The identifier of the data source.
args	JSON array or JSON object	The optional name-value-pairs as a single JSON object or a JSON object for each kept inside a JSON array for data source

Data handler object
Field	Type	Description
identifier	String	The identifier of the data handler.
args	JSON array or JSON object	The optional name-value-pairs as a single JSON object or a JSON object for each kept inside a JSON array for data handler

Response: The result of converted data ready as an appropriate JSON response

Saving an ICal email attachment

If an ICal file is attached to an email, its content can be saved as appointments and tasks into given calendar and task folder. If the fields "com.openexchange.groupware.calendar.confirmstatus" and "com.openexchange.groupware.calendar.confirmmessage" are set, the data handler inserts the appointment with the given status for the user, if the appointment does not exist. If it is already existing, the handler just updates the participant status.

Data source's JSON object
{ "identifier":"com.openexchange.mail.ical" "args": [ {"com.openexchange.mail.conversion.fullname":"<folder-fullname>"}, {"com.openexchange.mail.conversion.mailid":"<mail-id>"}, {"com.openexchange.mail.conversion.sequenceid":"<attachment-sequence-id>"} ] }

Data handler's JSON object
{ "identifier":"com.openexchange.ical" "args": [ {"com.openexchange.groupware.calendar.folder":"<calendar-folder-id>"}, {"com.openexchange.groupware.task.folder":"<task-folder-id>"}, {"com.openexchange.groupware.calendar.confirmstatus":"<status>"}, {"com.openexchange.groupware.calendar.confirmmessage":"<message>"} ] }

Response: A JSON array of JSON objects each providing folder and object ID of added appointment/task; e.g. [{"folder_id":2567, "id":7689}, ...]

Converting an ICal email attachment into JSON objects

If an ICal file is attached to an email, its content can converted to JSON appointments and tasks.

Data source's JSON object
{ "identifier":"com.openexchange.mail.ical" "args": [ {"com.openexchange.mail.conversion.fullname":"<folder-fullname>"} {"com.openexchange.mail.conversion.mailid":"<mail-id>"} {"com.openexchange.mail.conversion.sequenceid":"<attachment-sequence-id>"} ] }

Data handler's JSON object.
Note that all arguments are optional: Default is user time zone and zero recurrence position
"com.openexchange.groupware.calendar.searchobject" triggers a search for the uid, and replaces the object_id and folder_id with the data of the corresponding ox-object id, if existing. The returned objects are still the ical objects and NOT the ox-objects.
{ "identifier":"com.openexchange.ical.json" "args": [ {"com.openexchange.groupware.calendar.timezone":"<timezone-id>"} {"com.openexchange.groupware.calendar.recurrencePosition":"<recurrence-position>"} {"com.openexchange.groupware.calendar.searchobject":"<true|false>"} ] }

Response: A JSON array of JSON objects for each appointment/task as described in Common object data, Detailed task and appointment data and Detailed task data/ Detailed appointment data

Saving a VCard email attachment

If a VCard file is attached to an email, its content can be saved as contacts into given contact folder.

Data source's JSON object
{ "identifier":"com.openexchange.mail.vcard", "args": [ {"com.openexchange.mail.conversion.fullname":"<folder-fullname>"}, {"com.openexchange.mail.conversion.mailid":"<mail-id>"}, {"com.openexchange.mail.conversion.sequenceid":"<attachment-sequence-id>"} ] }

Data handler's JSON object
{ "identifier":"com.openexchange.contact", "args": [ {"com.openexchange.groupware.contact.folder":"<contact-folder-id>"} ] }

Response: A JSON array of JSON objects each providing folder and object ID of added contact; e.g. [{"folder_id":2567, "id":7689}, ...]

Contact(s) attached to a new email as a VCard file

Obtain VCard data from specified contact object(s).

Data source's JSON object
{ "identifier":"com.openexchange.contact" "args": [ {"folder":"<folder-id1>","id":"<id1>"} ... {"folder":"<folder-idn>","id":"<idn>"} ] }

Get a new email's JSON object with specified VCard data source attached.

Data handler's JSON object
{ "identifier":"com.openexchange.mail.vcard" "args":[] }

Response: A mail JSON object.

Module "search" (preliminary)

The search module is an enhancement to each search request as an optional JSON object via PUT method to filter elements; e.g.

PUT /ajax/contacts?action=all&...

{"filter":{search-term-object}}

This section describes the syntax of the optional JSON object representing the search term.
In general the structure of a search term is in prefix notation; meaning the operator is written before its operands:

{"operation":"equals","operands":[...]}

Moreover there are two different types of a search terms:

A single search term
A composite search term

A single search term reflects an operation which cannot hold nested search terms as operands; e.g. "equals". In opposite to this a composite search term holds one or more nested search terms as operands; e.g. "not" or the logical junctors "and"/"or".

By now the following operations are supported:

composite operations
- "and" - The AND junctor
- "or" - The OR junctor
- "not" - Negation
single operations
- "equals" - Equals comparison
- "lt" - Less-than comparison
- "gt" - Greater-than comparison

Furthermore following operand types are supported for single search terms:

Column - Providing a name referring to a field/column
Constant - A constant

Example of an EQUALS search term:
{"operation":"equals","operands":[{"type":"column","value":"first_name"},"Jane"]}

Example of an OR search term:
{"operation":"or","operands": [ {"operation":"equals","operands":[{"type":"column","value":"first_name"},"Jane"]}, {"operation":"gt","operands":[{"type":"column","value":"birthday"},"1975-05-01"]} ] }

Refer to object data tables introduced by different modules to know which field names are supported; e.g. for tasks it is Common object data, Detailed task and appointment data, and Detailed task data.

Module "search" (alternative suggestion, still preliminary)

The search module is an enhancement to each search request as an optional JSON object via PUT method to filter elements; e.g.

PUT /ajax/contacts?action=all&...

{"filter":[search term]}

This section describes the syntax of the optional JSON object representing the search term. In general the structure of a search term is in prefix notation; meaning the operator is written before its operands:

[">", 5, 2]

The available operators are:

Comparison operators ">", "<", "=", "<=", ">=", "<>"
logic operators "not", "and", "or"

Comparison operators have exactly two operands. Each operand can be either a field name or a constant. A field name is an object with the member "field" specifying the field name, e.g. { field: "first_name" }. The available field names depend on the searched module. Primitive JSON types are interpreted as constants. Arrays are not valid operands for comparison operators.

The logic operator "not" has exactly one operand, the other logic operators can have any number of operands. Each operand must be an array representing a nested search expression.

Module "mail account" (available with v6.12)

The mail account module is used to manage multiple mail accounts held by a user.

Get All mail accounts

GET /ajax/account?action=all

Parameters:

session – A session ID previously obtained from the login module.
columns – A comma-separated list of columns to return. Each column is specified by a numeric column identifier. Column identifiers for mail account's are defined in mail account data.

Response: An array with attachment data. Each array element describes one mail account and is itself an array. The elements of each array contain the information specified by the corresponding identifiers in the columns parameter.

Get a mail account

GET /ajax/account?action=get

Parameters:

session – A session ID previously obtained from the login module.
id – The ID of the account to return.

Response: A JSON object representing the desired mail account. See mail account data.

Mail account data
ID	Name	Type	Value
1001	id	Number	Account ID
1002	login	String	The login.
1003	password	String	The (optional) password.
1004	mail_url	String	The mail server URL; e.g. "imap://imap.somewhere.com:143". URL is preferred over single fields (like mail_server, mail_port, etc.)
1005	transport_url	String	The transport server URL; e.g. "smtp://smtp.somewhere.com:25". URL is preferred over single fields (like transport_server, transport_port, etc.)
1006	name	String	Account's display name.
1007	primary_address	String	User's primary address in account; e.g. "someone@somewhere.com"
1008	spam_handler	String	The name of the spam handler used by account.
1009	trash	String	The name of the default trash folder.
1010	sent	String	The name of the default sent folder.
1011	drafts	String	The name of the default drafts folder.
1012	spam	String	The name of the default spam folder.
1013	confirmed_spam	String	The name of the default confirmed-spam folder.
1014	confirmed_ham	String	The name of the default confirmed-ham folder.
1015	mail_server	String	The mail server's hostname or IP address.
1016	mail_port	Number	The mail server's port.
1017	mail_protocol	String	The mail server's protocol. Always use basic protocol name. E.g. use "imap" instead of "imaps"
1018	mail_secure	Boolean	Whether to establish a secure connection to mail server (SSL, TLS).
1019	transport_server	String	The transport server's hostname or IP address.
1020	transport_port	Number	The transport server's port.
1021	transport_protocol	String	The transport server's protocol. Always use basic protocol name. E.g. use "smtp" instead of "smtps"
1022	transport_secure	Boolean	Whether to establish a secure connection to transport server (SSL, TLS).
1023	transport_login	String	The transport login. Please see "transport_auth" for the handling of this field.
1024	transport_password	String	The transport password. Please see "transport_auth" for the handling of this field.
1025	unified_inbox_enabled	Boolean	If enabled for Unified INBOX
1026	trash_fullname	String	Path to default trash folder. Preferred over "trash"
1027	sent_fullname	String	Path to default sent folder. Preferred over "sent"
1028	drafts_fullname	String	Path to default drafts folder. Preferred over "drafts"
1029	spam_fullname	String	Path to default spam folder. Preferred over "spam"
1030	confirmed_spam_fullname	String	Path to default confirmed-spam folder. Preferred over "confirmed_spam"
1031	confirmed_ham_fullname	String	Path to default confirmed-ham folder. Preferred over "confirmed_ham"
1032	pop3_refresh_rate	Number	The interval in minutes the POP3 account is refreshed
1033	pop3_expunge_on_quit	Boolean	Whether POP3 messages shall be deleted on actual POP3 account after retrieval or not
1034	pop3_delete_write_through	Boolean	If option "pop3_expunge_on_quit" is disabled, this property defines whether a delete in local INBOX also deletes affected message in actual POP3 account
1035	pop3_storage	String	The name of POP3 storage provider, default is "mailaccount"
1036	pop3_path	String	Path to POP3's virtual root folder in storage, default is name of the POP3 account beside default folders
1037	personal	String	The customizable personal part of email address
1038	reply_to	String	The customizable reply-to email address
1039	addresses	String	The comma-separated list of available E-Mail addresses including aliases. !! Only available for primary mail account !!
1040	meta	JSON data	Stores arbitrary JSON data as specified by client associated with the mail account
1041	archive	String	The name of the archive folder. Currently not functional!
1042	archive_fullname	String	The full name of the archive folder. Currently not functional!
1043	transport_auth	String	Available since v7.6.1 Specifies the source for mail transport (SMTP) credentials. Possible values: "mail", "custom", and "none". - "mail" signals to use the same credentials as given in associated mail store (IMAP, POP3). - "custom" signals that individual credentials are supposed to be used (fields "transport_login" and "transport_password" are considered). - "none" means the mail transport does not support any authentication mechanism (rare case!)

Create a new mail account

PUT /ajax/account?action=new

Parameters:

session – A session ID previously obtained from the login module.

Request: A JSON object describing the new account to create. See mail account data.

Response: A JSON object representing the inserted mail account. See mail account data.

Update a mail account

PUT /ajax/account?action=update

Parameters:

session – A session ID previously obtained from the login module.

Request: A JSON object identifiying (field ID is present) and describing the account to update. See mail account data.

Response: A JSON object representing the updated mail account. See mail account data.

Delete a mail account

PUT /ajax/account?action=delete

Parameters:

session – A session ID previously obtained from the login module.

Request body: An array with the ID of the mail account to delete.

Validate a mail account (which shall be created)

PUT /ajax/account?action=validate

Parameters:

session – A session ID previously obtained from the login module.
tree - An optional boolean parameter which indicates whether on successful validation the folder tree shall be returned (NULL on failure) or if set to "false" or missing only a boolean is returned which indicates validation result

Request: A JSON object describing the new account to validate. See mail account data.

Response: Dependent on optional "tree" parameter a JSON folder object or a boolean value indicating the validation result

The JSON folder object corresponding to Common folder data and Detailed folder data. Additionally a field "subfolder_array" is added which contains possible subfolders. This field is missing if a folder contains no subfolders.

Module Auto Configuration (since 6.22)

Get Auto Configuration

GET /ajax/autoconfig?action=get

Parameters:

session – A session ID previously obtained from the login module.
email – Email Adress for which a mail configuration will be discovered.
password – Corresponding password for the mail account (optional)

Response: A JSON Object containing the best available settings for an appropriate mail Server for the given email address. The fields are described in mail account data. The Data may be incomplete or even empty.

Module "user" (available with v6.14)

The user module is used to access user information.

Get all users

GET /ajax/user?action=all

Parameters:

session – A session ID previously obtained from the login module.
columns – A comma-separated list of columns to return. Each column is specified by a numeric column identifier. Column identifiers for users are defined in Common object data, Detailed contact data and Detailed user data.
sort (optional) – The identifier of a column which determines the sort order of the response. If this parameter is specified, then the parameter order must be also specified.
order (optional) – "asc" if the response entires should be sorted in the ascending order, "desc" if the response entries should be sorted in the descending order. If this parameter is specified, then the parameter sort must be also specified.

Response with timestamp: An array with user data. Each array element describes one user and is itself an array. The elements of each array contain the information specified by the corresponding identifiers in the columns parameter.

Detailed user data
ID	Displayed name	Name	Type	Value
610	Aliases	aliases	Array	The user's aliases
611	Time zone	timezone	String	The time zone ID.
612	Locale	locale	String	The name of user's entire locale, with the language, country and variant separated by underbars. E.g. "en", "de_DE"
613	Groups	groups	Array	The IDs of user's groups
614	Contact ID	contact_id	Number	The contact ID of the user
615	Login info	login_info	String	The user's login information
616	Guest Created By	guest_created_by	Number	The ID of the user who has created this guest in case this user represents a guest user; it is 0 for regular users (preliminary, available with v7.8.0)

Get a list of users

PUT /ajax/user?action=list

Parameters:

session – A session ID previously obtained from the login module.
columns – A comma-separated list of columns to return. Each column is specified by a numeric column identifier. Column identifiers for users are defined in Common object data, Detailed contact data and Detailed user data.

Request body: An array of numbers. Each number is the ID of requested user. Since v6.18.1, a null value in the array is interpreted as the currently logged in user.

Response with timestamp: An array with user data. Each array element describes one user and is itself an array. The elements of each array contain the information specified by the corresponding identifiers in the columns parameter.

Get a user

GET /ajax/user?action=get

Parameters:

session – A session ID previously obtained from the login module.
id – Object ID of the requested user. Since v6.18.1, this parameter is optional: the default is the currently logged in user.

Response with timestamp: An object containing all data of the requested user. The fields of the object are listed in Common object data, Detailed contact data and Detailed user data.

Update a user

PUT /ajax/user?action=update

Parameters:

session – A session ID previously obtained from the login module.
id – Object ID of the updated user.
timestamp – Timestamp of the updated user. If the user was modified after the specified timestamp, then the update must fail.

Request body: User object as described in Common object data, Detailed contact data and Detailed user data. Only modified fields are present.

Note: "timezone" and "locale" are the only fields from Detailed user data which are allowed to be updated.

Response with timestamp: An empty object.

Search users

PUT /ajax/user?action=search

Parameters:

session – A session ID previously obtained from the login module.
columns – The requested fields
sort (optional) – The identifier of a column which determines the sort order of the response. If this parameter is specified, then the parameter order must be also specified. In case of use of column 609 (use count depending order for collected users with global address book) the parameter "order" ist NOT necessary and will be ignored.
order (optional) – "asc" if the response entires should be sorted in the ascending order, "desc" if the response entries should be sorted in the descending order. If this parameter is specified, then the parameter sort must be also specified.

Request body: An Object as described in Search users.

Search users
Name	Type	Value
pattern	String	Search pattern to find users. In the pattern, the character "*" matches zero or more characters and the character "?" matches exactly one character. All other characters match only themselves.
startletter	String	Search users with the given startletter. If this field is present, the pattern is matched against the user field which is specified by the property contact_first_letter_field on the server (default: last name). Otherwise, the pattern is matched against the display name.

Alternative request body: An Object as described in Search users alternative.

Search users alternative
Name	Type	Value
last_name	String	Searches users where the last name match with the given last name.
first_name	String	Searches users where the first name match with the given first name.
display_name	String	Searches users where the display name match with the given display name.
orSearch	Boolean	If set to true, the fields are connected through an OR search habit.
emailAutoComplete	Boolean	If set to true, results are guaranteed to contain at least one email adress and the search is performed by connecting the relevant fields through an OR search habit.

Response: An array with user data. Each array element describes one user and is itself an array. The elements of each array contain the information specified by the corresponding identifiers in the columns parameter.

Get user attribute (available with v6.20)

GET /ajax/user?action=getAttribute

Parameters:

session – A session ID previously obtained from the login module.
id – ID of the user.
name – The attribute name.

Response without timestamp: A JSON object providing name and value of the requested attribute

 { "name":"somename", "value":"somevalue"}

Set user attribute (available with v6.20)

PUT /ajax/user?action=setAttribute

Parameters:

session – A session ID previously obtained from the login module.
id – ID of the user.
setIfAbsent - Set to "true" to put the value only if the specified name is not already associated with a value, otherwise "false" to put value in any case

Request body: A JSON object providing name and value of the attribute. If the "value" field id missing or NULL, the attribute is removed.

 { "name":"somename", "value":"somevalue"}

Response: The boolean value "true" if PUT was successful; otherwise "false"

Module "user/me" (available with v7.6.2)

The user/me module is used to access formal information about current user.

Get user information

GET /ajax/user/me

Parameters:

session – A session ID previously obtained from the login module.

Response with timestamp: A JSON object providing information for current user

 {
   "data": {
       "context_id": 1234,
       "user_id": 5,
       "is_context_admin": false,
       "login_name": "user5",
       "display_name": "User Five"
   },
   "timestamp": 1400855683800
 }

Module "OAuth"

The Open-Xchange server can act as an OAuth client (starting with v6.20) or be an OAuth provider itself (starting with v7.8.0). The OAuth module supports both aspects:

Manage multiple OAuth accounts for certain online services for a user. The OAuth mechanism allows the Open-Xchange application to act as behalf of this user using previously obtained access tokens granted by user. The according interface is divided into two parts: Account access and service's meta data access.
Manage granted accesses of external services that can access a users data on his behalf, called "grants".

OAuth account access (available with v6.20)

The OAuth service account access description.

Get all OAuth accounts

GET /ajax/oauth/accounts?action=all

Parameters:

session – A session ID previously obtained from the login module.
serviceId – The optional service meta data identifier. If missing all accounts of all services are returned; otherwise all accounts of specified service are returned

Response: An array with account data. Each array element is a JSON object describing an OAuth account as specified in OAuth account data.

Get an OAuth account

GET /ajax/oauth/accounts?action=get

Parameters:

session – A session ID previously obtained from the login module.
id – The account identifier.

Response: A JSON object describing an OAuth account as specified in OAuth account data.

OAuth account
Field	Type	Description
id	Number	The numeric identifier of the OAuth account.
displayName	String	The account display name
serviceId	String	The identifier of the associated service meta data; e.g. `"com.openexchange.oauth.twitter"`
token	String	The token
secret	String	The token secret

Delete an OAuth account

PUT /ajax/oauth/accounts?action=delete

Parameters:

session – A session ID previously obtained from the login module.
id – The account identifier.

Response: The boolean value "true" if successful

Update an OAuth account

PUT /ajax/oauth/accounts?action=update

Parameters:

session – A session ID previously obtained from the login module.
id – The account identifier. May also be provided in request body's JSON OAuth account representation by "id" field.

Request body: A JSON object providing the OAuth account fields to update. See OAuth account data. Currently the only values which make sende being updated are "displayName" and the "token"-"secret"-pair.

Response: The boolean value "true" if successful

Initialize creation of an OAuth account

GET /ajax/oauth/accounts?action=init

Parameters:

session – A session ID previously obtained from the login module.
serviceId – The service meta data identifier; e.g. "com.openexchange.oauth.twitter"

Response: An JSON representation of the resulting interaction providing needed information to complete account creation. See OAuth interaction data.

OAuth interaction
Field	Type	Description
authUrl	String	The numeric identifier of the OAuth account.
type	String	The interaction type name; `"outOfBand"` or `"callback"`
token	String	The token
uuid	String	The UUID for this OAuth interaction

Create an OAuth account

Note: This action is typically called by provided call-back URL and is ony intended for manual invocation if "outOfBand" interaction is returned by preceeding /ajax/oauth/account?action=init step.

PUT /ajax/oauth/accounts?action=create

Parameters:

session – A session ID previously obtained from the login module
oauth_token – The request token from preceeding OAuth interaction
uuid – The UUID of the preceeding OAuth interaction
oauth_verfifier – The verifier string which confirms that user granted access
displayName – The display name for the new account

Response: A JSON object describing the newly created OAuth account as specified in OAuth account data.

OAuth service meta data access (available with v6.20)

The OAuth service meta data access description.

Get all OAuth services' meta data

GET /ajax/oauth/services?action=all

Parameters:

session – A session ID previously obtained from the login module.

Response: An array with service data. Each array element is a JSON object describing an OAuth service's meta data as specified in OAuth service meta data.

Get an OAuth service's meta data

GET /ajax/oauth/services?action=get

Parameters:

session – A session ID previously obtained from the login module.
id – The service's identifier.

Response: A JSON object describing an OAuth service's meta data as specified in OAuth service meta data.

OAuth service meta data
Field	Type	Description
id	Number	The numeric identifier of the OAuth account.
displayName	String	The account display name

Manage OAuth grants (available with v7.8.0)

Get all grants

GET /ajax/oauth/grants?action=all

Parameters:

session – A session ID previously obtained from the login module.

Response: A JSON array containing one object for every granted access as specified in OAuth grants.

OAuth grants
Field	Type	Description
client	Object	A JSON object describing the external service as in OAuth client.
scopes	Object	A JSON object with mappings from scope tokens to translated, human-readable descriptions for every scope that was granted to the external service. Example: {"read_contacts":"See all your contacts."}
date	Time	The time when the access was granted.

OAuth client
Field	Type	Description
id	String	The clients ID.
name	String	The clients/services name.
description	String	A description of the client.
website	String	A URL to the clients website.
icon	String	A URL or path to obtain the clients icon via the "image" module.

Revoke access

GET oauth/grants?action=revoke

Parameters:

client - The ID of the client whose access shall be revoked.

Response: Nothing.

Module "JSlob" (available with v6.22)

The JSlob module is used to store&retrieve arbitrary JSON-structured configuration for a single user.

Get all JSLobs

GET /ajax/jslob?action=all

Parameters:

session – A session ID previously obtained from the login module.
serviceId – Optional identifier for the JSlob service. Default is com.openexchange.jslob.config

Response: An array with JSON configurations. Each array element is a JSON object representing a certain configuration consisting if a "id" and "jslob" field. See JSlob data

JSlob data
Field	Type	Description
id	String or Number	The identifier of the JSlob.
jslob	JSON object	The JSON configuration.

List denoted JSLobs

PUT /ajax/jslob?action=list

Parameters:

session – A session ID previously obtained from the login module.
serviceId – Optional identifier for the JSlob service. Default is com.openexchange.jslob.config

Request body: A JSON array of JSlob identifiers; e.g. [ "1", "2", … ]

Response: An array with JSON configurations. Each array element is a JSON object representing a certain configuration consisting if a "id" and "jslob" field. See JSlob data

Delete a JSlob

PUT /ajax/jslob?action=set

Parameters:

session – A session ID previously obtained from the login module.
serviceId – Optional identifier for the JSlob service. Default is com.openexchange.jslob.config
id – The JSlob identifier.

Request body: An empty request body

Response: Nothing

Store a JSlob

PUT /ajax/jslob?action=set

Parameters:

session – A session ID previously obtained from the login module.
serviceId – Optional identifier for the JSlob service. Default is com.openexchange.jslob.config
id – The identifier for the new JSlob to create

Request body: A JSON object containing the "path" and "value" of the JSON configuration to store. If "path" is missing the current configuration is merged with given JSON object.

Response: Nothing

Update a single value inside a JSlob

PUT /ajax/jslob?action=update

Parameters:

session – A session ID previously obtained from the login module.
serviceId – Optional identifier for the JSlob service. Default is com.openexchange.jslob.config
id – The identifier for the new JSlob to create

Request body: The new value to store inside specified JSlob

Response: A JSlob representation according to JSlob data

REST-like access to JSlob module

to be done...

Module "freebusy" (available with v6.22.1)

Provides access to free/busy information.

Get free/busy information

GET /ajax/freebusy?action=get

Parameters:

session – A session ID previously obtained from the login module.
participant – The participant to get the free/busy data for. May be either an internal user-, group- or resource-ID, or an e-mail address for external participants.
from – The lower (inclusive) limit of the requested time-range.
until – The upper (exclusive) limit of the requested time-range.
merged (optional) – True or False. Whether to pre-process the free/busy data on the server or not. This includes sorting as well as merging overlapping free/busy intervals.

Response: An array of free/busy intervals as described in Free/Busy interval

Free/Busy interval

Name

Type

Value

start_date

Time

Start time of the interval.

end_date

Time

End time of the interval.

shown_as

Number

The busy status of this interval, one of:

1	unknown
1	reserved
2	temporary
3	absent
4	free

id

String

Object ID of the corresponding appointment if available.

folder_id

String

Folder ID of the corresponding appointment if available.

title

String

Title of the corresponding appointment if available.

location

String

Location of the corresponding appointment if available.

full_time

Boolean

True if the corresponding appointment is a whole day appointment, not present otherwise.

Get a list of free/busy information

PUT /ajax/freebusy?action=list

Parameters:

session – A session ID previously obtained from the login module.
from – The lower (inclusive) limit of the requested time-range.
until – The upper (exclusive) limit of the requested time-range.
merged (optional) – True or False. Whether to pre-process the free/busy data on the server or not. This includes sorting as well as merging overlapping free/busy intervals.

Request body: An array of participants to get the free/busy data for. Each participant may be either an internal user-, group- or resource-ID, or an e-mail address for external participants.

Response: The free/busy data for all requested participants inside a JSON object with the participants as keys. Besides a combined data element for a requested group, all group members are resolved and listed seperately in the result. If the 'merged' view was requested, an additional data element named 'merged' representing a combined view for all requested participants is added to the results implicitly.

Messaging Services

Messaging Services represent a messaging backend. The messaging services add a new folder module "messaging".

A *Messaging Service* Object has the following structure:

Messaging Service
Field	Type	Description
id	String	Identifies a messagingService. Usually a String in reverse domain name notation. Example: "com.openexchange.messaging.twitter"
displayName	String	Human readable display name of the service. Example: "Twitter"
formDescription	Array	A description for dynamic form fields. Same as in PubSub
messagingActions	Array	An array of Strings a dynamic set of actions that are possible with messages of this service. Described in detail later on.

The available JSON calls are:

GET /ajax/messaging/service?action=all

session - A session ID previously obtained from the login module.

Response: A standard response object containing an array of messaging service objects.

GET /ajax/messaging/service?action=get

session - A session ID previously obtained from the login module.
id - The ID of the messaging service to load

Response: A standard response object containing a messaging service object.

Messaging Accounts

A messaging account represents the concrete configuration of an account of a given messaging service. A *messaging account* has the following structure:

Messaging Account
Field	Type	Description
id	Number	Identifies a given messaging account. This is not writeable and is generated by the server
messagingService	String	The messaging service id of the messaging service this account belongs to
displayName	String	User chosen String to identify a given account. Will also be translated into the folder name of the folder representing the accounts content
configuration	Object	Configuration data according to the formDescription of the relevant messagingService

The available JSON calls are:

PUT /ajax/messaging/account?action=new

session - A session ID previously obtained from the login module.

Request body: A JSON Object describing the account to be created. Response: A response object containing the new account id as its data.

PUT /ajax/messaging/account?action=update

session - A session ID previously obtained from the login module.

Request body: A JSON Object describing the update to the account. Note that the "id" and "messagingService" must always be set. Response: A response object containing the number 1 as its data on success.

GET /ajax/messaging/account?action=get

session - A session ID previously obtained from the login module.
messagingService - The messaging service id that the account belongs to
id - An account ID to load

Response: A response object containing the JSON Object representing the loaded account as its data.

GET /ajax/messaging/account?action=delete

session - A session ID previously obtained from the login module.
messagingService - The messaging service id that the account belongs to
id - An account ID to delete

Response: A response object containing 1 as its data on success.

GET /ajax/messaging/account?action=all

session - A session ID previously obtained from the login module
messagingService - (optional) list only those accounts that belong to the given messagingService.

Response: A response object containing a JSON array of account objects in its data section.

Messaging Messages

A Messaging Message represents a single message. It consists of some metadata, headers and a content. The content attribute varies by the content-type header. If the content type is text/* it is a string, if it is a multipart/* it is an array of objects, each representing a part of the multipart. If it is anything else it is considered binary and is a Base64 encoded string (ToDo : This is not smart enough yet. I suppose we'll have to include encoding options for binaries much like in our EAVJSONProposal).

The folder id of a message follows a predefined format:

[messagingService]://[accountId]/[path]

for an imaginary example consider: "com.openexchange.messaging.twitter://535/defaultTimeline/directMessages"

The structure of a Messaging Message is as follows:

Messaging Message
Field	Type	Description
id	String	The id of this message. Only unique in the given folder.
folder	String	The folder id.
threadLevel	Number	The nesting level of this message according to the conversation it's belonged to. May not be set.
flags	Number	Bitmask showing the state of this message. The same as in the module "mail".
receivedDate	Time	The time this message was received.
colorLabel	Number	An arbitrary number marking this message in a certain color. The same as the colorLabel common to all groupware objects (see HTTP API)
user	Array	An array of strings. Represents user flags.
size	Number	The binary size of this message in bytes.
picture	String	A string depicting the URL to a picture for this message
url	String	A string that contains a link to the messages origin. Currently used in RSS messages.
headers	JSONObject	A JSON Object of header data. Usually the value is either a String or an Array (if the headers has more than one value). Certain headers are rendered as more complex structures, see the section "Complex Headers".
content	String or Array	See introductory note for Messaging Messages.

The structure of a Multipart Part (an element of the content array in a multipart/* message) is a s follows:

Multipart Element
Field	Type	Description
sectionId	String	The sectionId of this part.
headers	JSONObject	Same as above.
content	String or Array	Same as above.

Some *Complex Headers* have a structure differing from simple key/value(s) pairs. These are:

Content-Type

The Content-Type header is represented as a JSON Object with the following structure:

Content Type Header
Field	Type	Description
type	String	The type string (eg. text/plain). This governs the rendering of the content of a message.
params	Object	An Object with the keys "charset", containing the charset of this message and "name" pointing to the filename this part or message should have.

When setting the content-type header in a messaging messages generated on the client the header may also be sent in it's short form. The short form is the type followed by a semi-colon separated list of key=value pairs of the params. For example: "text/plain;charset=utf-8;name=something.txt".

Address Headers

Address headers ( From, To,Cc,Bcc,Reply-To,Resent-Reply-To,Disposition-Notification-To,Resent-To,Sender,Resent-Sender,Resent-To,Resent-Cc,Resent-Bcc ) are formatted as an array of objects, or in case of "From" as a single object, with the attributes *address* and *personal*:

Address Headers
Field	Type	Description
address	String	The technical part of the address
personal	String	A displayable description of the addressee. May be unset.

When setting an address header the header may also be sent by clients in the short form "personal <address>", for example "Clark Kent <clark.kent@dailyplanet.com>".

List renderings of Messaging Messages

Actions returning lists of messages usually return only a selection of attributes of a message driven by a "columns" parameter. The columns that are addressable point either to attributes of the top-level message or its headers.

Header Equivalence
Column	Refers To
refers to
id	The id attribute
folderId	The folder attribute
contentType	The "Content-Type" header
from	The "From" header
to	The "To" header
cc	The "Cc" header
bcc	The "Bcc" header
subject	The "Subject" header
size	The size attribute
sentDate	The "Date" header
receivedDate	The receivedDate attribute
flags	The flags attribute
threadLevel	The threadLevel attribute
dispositionNotificationTo	The "Disposition-Notification-To" header.
priority	The "X-Priority" header
colorLabel	The colorLabel attribute
url	The url attribute
body	The content attribute
headers	The headers attribute

JSON calls

GET /ajax/messaging/message?action=get

session - A session ID previously obtained from the login module
id - The ID of the message to load
peek - (optional) if set to "true" the read/unread state of the message will not change. Defaults to false.
folder - The folder id

Response: An Object representing the loaded message.

PUT /ajax/messaging/message?action=send

session - A session ID previously obtained from the login module
recipients - (optional) If set the message is sent to the given list of recipients, otherwise this defaults to the "To" header of the message.

Request Body: The Request Body should contain the JSON Object representing the message to be sent. Response: "1" as the data of a regular response on success.

GET or PUT /ajax/messaging/message?action=perform

session - A session ID previously obtained from the login module
action - The messaging action to invoke
id - The id of the message the action should be invoked on. Only used on actions of type "storage".
folder - The folder id.

Request Body: On actions of type "message" the body should contain the JSON representation of the message the action should be applied to. Response: Either 1 if no further user interaction is needed or a messaging message that, after having the user modify it has to be supplied back to the follower action of this action.

Thus, to invoke a messaging action of type "storage" the folder and id are needed. Messaging actions of type "message" need a folder and message in the body. Messaging actions of type "none" need a messaging message and account.

List style requests

GET /ajax/messaging/message?action=all

session - A session ID previously obtained from the login module
columns - A comma-separated list of column names.
sort - (optional) A column to sort by.
order - (optional) The order direction. "asc" for ascending or "desc" for descending. Defaults to "asc"
folder - The folder id.

Response: An array of arrays with the sub arrays containing the values of the fields asked for by the the columns parameter.

PUT /ajax/messaging/messages?action=list

session - A session ID previously obtained from the login module
columns - A comma-separated list of column names.

Request Body: An array of arrays with the folder and id as elements each identifying a message.

Response: An array of arrays with the sub arrays containing the values of the fields asked for by the columns parameter.

Snippet module (available with v7.0.0/v6.22.0)

Gets a certain snippet by identifier

GET /ajax/snippet?action=get

session - The session identifier
id - The snippet identifier

Response: The snippet's JSON representation; e.g.

 {
   "id": "1",
   "type": "signature",
   "props": {"x-custom": "any value"},
   "module": "mail",
   "displayname": "My signature",
   "misc": {"foo": "bar"},
   "createdby": 17,
   "content": "-- \\nMy name and position here",
   "accountid": 0,
   "shared": false,
   "files":
   [
     {
       "mimetype": "image/png; name=pic.png",
       "filename": "pic.png",
       "id": "46f49f8a-40d5-4f29-8bc9-728f3420864c",
       "size": 6074
     }
   ]
 }

Gets all snippets associated with the current user and context

GET /ajax/snippet?action=all

session - The session identifier
type - Optional CSV of types to filter by; e.g. "signature"

Response: A JSON array of snippets' JSON representations

Gets certain snippets by identifiers

GET /ajax/snippet?action=list

session - The session identifier

Request body: A JSON array of snippet identifiers

Response: A JSON array of snippets' JSON representations

Gets a certain snippet's attachment by identifier

GET /ajax/snippet?action=getattachment

session - The session identifier
id - The snippet identifier
attachmentid - The attachment identifier

Response: The attachment's raw data

Creates a new snippet

PUT /ajax/snippet?action=new

session - The session identifier

Request body: A JSON representation of the snippet. Excluding its attachments (see attach/detach actions)

Response: The created snippet's identifier

Updates a certain snippet by identifier

PUT /ajax/snippet?action=update

session - The session identifier
id - The snippet identifier

Request body: A JSON representation of the snippet providing the fields that should be changed. Excluding its attachments (see attach/detach actions)

Response: The updated snippet's JSON representation

Deletes a certain snippet by identifier

PUT /ajax/snippet?action=delete

session - The session identifier
id - The snippet identifier (otherwise provide one or more identifiers through request body's JSON array)

Request body: A JSON array of identifiers denoting the snippets to delete

Response: An empty/dummy result (don't care)

Attaches one or more files to an existing snippet

POST /ajax/snippet?action=attach

session - The session identifier
id - The snippet identifier

Request body: Multipart form data providing the upload files to attach to the snippet.

Response: The updated snippet's identifier

Detaches open or more files from an existing snippet

PUT /ajax/snippet?action=detach

session - The session identifier
id - The snippet identifier

Request body: A JSON array providing the identifiers of the attachments to remove from snippet

Response: The updated snippet's identifier

Picture Halo (since 7.4.1)

GET /appsuite/api/halo/contact/picture

session - (optional) falls back to the public session cookie
internal_userid - (optional) The internal user id of a user whose picture you want to load
userid - (optional) an alias for internal_userid
user_id - (optional) an alias for internal_userid
id - (optional) a contact id
email - (optional) an email to search for. Will pick global address book matches before regular matches. After that picks the most recently changed contact
email1 - (optional) an alias for email
email2 - (optional) another email address to use to find matches
email3 - (optional) and yet another email address to use to find matches

At least one of the optional search parameters should be set. All parameters are connected by OR during the search. More specific parameters like user_id or id are prioritized in case of multiple matches.

Response: The picture with proper eTag and caching headers set, or an HTTP Status 404 response, if no picture could be found.

Module "capabilities" (available with v7.4.2)

Provides access to capabilities, i.e. modules or features that are available on the backend and the user has access to.

Get a capability

GET /ajax/capabilities?action=get

Parameters:

session – A session ID previously obtained from the login module.
id – The identifier of the capability

Response: The requested capability as described in Capability, if available, otherwise an empty result

Capability
Name	Type	Value
id	String	The identifier of the capability
attributes	Object	A JSON object holding optional properties of the capability

Get all capabilities

GET /ajax/capabilities?action=all

Parameters:

session – A session ID previously obtained from the login module.

Response: An array of capability objects as described in Capability.

Module "jump" (available with v7.6.0)

The jump module is used to pass an acquired identity token for an authenticated user from one system to another for a single sign-on.

Acquire an identity token

GET /ajax/jump?action=identityToken

Parameters:

session – A session ID previously obtained from the login module.
system – The identifier for the external service/system

Response: The acquired identity token wrapped by a simple JSON object as described in Jump

Jump
Name	Type	Value
token	String	The identifier of the token

Module "find" (preliminary, available with v7.6.1)

The Find API consists of calls for performing searches within the modules mail, contacts, calendar, tasks and drive. It was designed to provide an iterative approach where the search criteria can be refined step-wise until the desired items are found. The starting point is always an "autocomplete" request, that suggests possible search filters based on a users input. Those filters are grouped into categories, called "facets". A facet may provide one or more "values" with every value being a possible filter. A client is meant to remember every value that was selected by a user and include it within the following "autocomplete" and "query" requests, while "query" performs the actual search and returns the found items.

Every request is bound to a module that must be specified via the URL-Parameter "module". Possible modules are

mail
contacts
calendar
tasks
drive

General assumptions

Some of the objects returned by the server contain former user input. A client must never interpret strings as HTML but always as plain text to be not vulnerable for CSS attacks!

Calls

The find API provides two dedicated calls under the servlet path find:

action=autocomplete
action=query

Facets

The style of a facet is responsible for how the according object is structured, how it is handled on the server-side and how the client has to handle it. We distinguish three styles of facets:

simple
default
exclusive

Every facet value contains an embedded "filter" object. The filter must not be changed by the client, it has to be seen as a black-box. Instead the filters of selected facet values have to be copied and sent to the server with the subsequent requests.

Simple Facets

A simple facet is a special facet that has exactly one value. The facets type and its value are strictly coupled, in a way that a display name for both, facet and value would be redundant. A simple facet generally denotes a logical field like 'phone number'. Internally this logical field can map to several internal fields (e.g. 'phone_private', 'phone_mobile', 'phone_business'). In clients the facet as a whole can be displayed as a single item. Example: "Search for 'term' in field 'phone number'".

Facet Structure
Field	Type	Description
style	"simple"	Denotes that this is a facet of style simple
id	<string>	The id of this facet. Unique within an autocomplete response. Can be used to distinguish and filter certain facets.
name	<string>	A displayable (and localized) name for this facet. If absent, an "item" attribute is present.
item (optional)	<object>	A more complex object to display this facet. Attributes are "name", "detail" (optional) and "image_url" (optional).
filter	<object>	The filter to refine the search.
flags	<array>	An array of flags, represented as strings.

Example:

{
    "id":"global",
    "style":"simple",
    "name":"test",
    "filter":{},
    "flags":[]
}

Default Facets

A default facet contains multiple values and may be present multiple times in search requests to filter results by a combination of different values (e.g. "mails with 'foo' and 'bar' in subject").

Facet values may be one- or two-dimensional. A one-dimensional value can be displayed as is and contains an according filter object. A two-dimensional value contains an array "options" with every option defining different semantics of how the value is used to filter the search results.

Facet Structure
Field	Type	Description
style	"default"	Denotes that this is a facet of style default
id	<string>	The id of this facet. Unique within an autocomplete response. Can be used to distinguish and filter certain facets.
name	<string>	A displayable (and localized) name for this facet. If absent, an "item" attribute is present.
item (optional)	<object>	A more complex object to display this facet. Attributes are "name", "detail" (optional) and "image_url" (optional).
values	<array>	An array of facet values.
flags	<array>	An array of flags, represented as strings.

Value Structure
Field	Type	Description
id	<string>	The values id. Unique within one facet.
name	<string>	A displayable (and localized) name for this value. May be superseded with an "item" attribute. Absent if the value contains options.
item (optional)	<object>	A more complex object to display this value. Attributes are "name", "detail" (optional) and "image_url" (optional). Absent if the value contains options.
filter	<object>	The filter to refine the search. Absent if the value contains options.
options (optional)	<array>	An array of options.

Option Structure
Field	Type	Description
id	<string>	The options id. Unique within a set of options.
name	<string>	The displayable (and localized) name for this option.
filter	<object>	The filter to refine the search.

Example:

{
    "id":"contacts",
    "style":"default",
    "name":"People",
    "values":[
      {
        "id":"contact/424242669/525793",
        "item":{
          "name":"Test Usere2123",
          "detail":"testuse1212r@example.com"
        },
        "options":[
          {
            "id":"from",
            "name":"From",
            "filter":{}
          },
          {
            "id":"to",
            "name":"To",
            "filter":{}
          },
          {
            "id":"all",
            "name":"From/To",
            "filter":{}
          }
        ]
      }
    ],
    "flags":[]
}

Exclusive Facets

An exclusive facet is a facet where the contained values are mutually exclusive. That means that the facet must only be present once in an autocomplete or query request.

Facet values may be one- or two-dimensional. A one-dimensional value can be displayed as is and contains an according filter object. A two-dimensional value contains an array "options" with every option defining different semantics of how the value is used to filter the search results.

Facet Structure
Field	Type	Description
style	"exclusive"	Denotes that this is a facet of style exclusive
id	<string>	The id of this facet. Unique within an autocomplete response. Can be used to distinguish and filter certain facets.
name	<string>	A displayable (and localized) name for this facet. If absent, an "item" attribute is present.
item (optional)	<object>	A more complex object to display this facet. Attributes are "name", "detail" (optional) and "image_url" (optional).
options	<array>	An array of facet values.
flags	<array>	An array of flags, represented as strings.

Value Structure
Field	Type	Description
id	<string>	The values id. Unique within one facet.
name	<string>	A displayable (and localized) name for this value. May be superseded with an "item" attribute. Absent if the value contains options.
item (optional)	<object>	A more complex object to display this value. Attributes are "name", "detail" (optional) and "image_url" (optional). Absent if the value contains options.
filter	<object>	The filter to refine the search. Absent if the value contains options.
options (optional)	<array>	An array of options.

Option Structure
Field	Type	Description
id	<string>	The options id. Unique within a set of options.
name	<string>	The displayable (and localized) name for this option.
filter	<object>	The filter to refine the search.

Example:

{
    "id":"time",
    "style":"exclusive",
    "name":"Time",
    "options":[
      {
        "id":"last_week",
        "name":"last week",
        "filter":{}
      },
      {
        "id":"last_month",
        "name":"last month",
        "filter":{}
      },
      {
        "id":"last_year",
        "name":"last year",
        "filter":{}
      }
    ],
    "flags":[]
}

Active Facets

Every value that has been selected by a user must be remembered and provided with every subsequent request. The representation of a facet within a request body differs from the one within an autocomplete response. We call those "active facets". Their representation is independent from their style.

Active Facet Structure
Field	Type	Description
facet	<string>	The id of the according facet.
value	<string>	The id of the according value. Must always be copied from the value object, not from a possibly according option (in the two-dimensional case).
filter	<object>	The filter object, copied from the value or option.

Configuration

According to the users configuration, some restrictions may apply that have to be heeded by clients. Those restrictions can be retrieved via the "config" or the "jslob" modules. The following restrictions may apply:

A user might have limited access to modules and therefore the Find API may only serve requests for a subset of all possible modules. The configuration object may contain an object with key "modules". Its value is an array containing all module identifiers that the user is allowed to use.

Some facets can be mandatory, i.e. they must be pre-defined by the client and provided with every request. Whether a facet is mandatory or not is decided on a per-module basis. The configuration object may contain an object with key "mandatory". Every facet that may be mandatory is specified via its id in that object (e.g. mandatory.folder). The value of such a key is either an array containing all module identifiers, where the facet is mandatory or null, if it is not manadatory in any module.

Due to performance reasons the service provider can enforce a minimium number of characters that have to be provided before an autocomplete request may be issued. That property is called "minimumQueryLength" and its value is an integer that specifies the minimum number of characters. If a client does not heed this property, the server will respond with an error if the provided user input is too short.

Config Example

GET http://localhost/appsuite/api/config/search?session={{session}}
Response:
{
    "data": {
        "mandatory": {
            "folder": [
                "mail"
            ]
        },
        "modules": [
            "mail",
            "contacts",
            "calendar",
            "tasks",
            "drive"
        ]
    }
}

GET http://localhost/appsuite/api/config/minimumSearchCharacters?session={{session}}
Response:
{
    "data": 0
}

JSLob Example

GET http://localhost/appsuite/api/jslob?action=get&id=io.ox/core&session={{session}}
Response:
{
    "data": {
        "id": "io.ox/core",
        "tree": {
            "search": {
                "modules": [
                    "mail",
                    "contacts",
                    "calendar",
                    "tasks",
                    "drive"
                ],
                "mandatory": {
                    "folder": [
                        "mail"
                    ]
                },
                "minimumQueryLength": 0
            }
        }
    }
}

autocomplete

Mandatory URL parameters:

action=autocomplete
module=<module-name>
session=<session-id>

Optional URL parameters:

limit=<int> - The maximum number of values returned per facet

Request body: A JSON object containing the users input (specified as "prefix"), already selected facets and possible options.

Example

PUT http://localhost/appsuite/api/find?action=autocomplete&module=mail&limit=3&session={{session}}
{
  "prefix":"test",  
  "facets":[
    {
      "facet":"folder",
      "value":"default0/INBOX"
    }
  ],
  "options":{
    "timezone":"UTC",
    "admin":false
  }
}

Response:
{
  "data":{
    "facets":[
      {
        "id":"global",
        "style":"simple",
        "name":"test",
        "filter":{},
        "flags":[]
      },      
      {
        "id":"contacts",
        "style":"default",
        "name":"People",
        "values":[
          {
            "id":"contact/424242669/525793",
            "item":{
              "name":"Test Usere2123",
              "detail":"testuse1212r@example.com"
            },
            "options":[
              {
                "id":"from",
                "name":"From",
                "filter":{}
              },
              {
                "id":"to",
                "name":"To",
                "filter":{}
              },
              {
                "id":"all",
                "name":"From/To",
                "filter":{}
              }
            ]
          }
        ],
        "flags":[]
      },
      {
        "id":"time",
        "style":"exclusive",
        "name":"Time",
        "options":[
          {
            "id":"last_week",
            "name":"last week",
            "filter":{}
          },
          {
            "id":"last_month",
            "name":"last month",
            "filter":{}
          },
          {
            "id":"last_year",
            "name":"last year",
            "filter":{}
          }
        ],
        "flags":[]
      }
    ]
  }
}

query

Mandatory URL parameters:

action=query
module=<module-name>
session=<session-id>

Optional URL parameters:

columns=<column-ids> - A comma-separated list of the module-specific columns that shall be contained in the response items.

Request body: A JSON object containing the selected facets and possible options. For pagination the keys "start" and "size" can be set.

Example

PUT http://localhost/appsuite/api/find?action=query&module=mail&columns=102,600,601,602,603,604,605,607,608,610,611,614,652&session={{session}}
{
  "facets":[
    {
      "facet":"folder",
      "value":"default0/INBOX",
      "filter":null
    },
    {
      "facet":"subject",
      "value":1409579708116,
      "filter":{
        "fields":[
          "subject"
        ],
        "queries":[
          "lorem"
        ]
      }
    }
  ],
  "options":{
    "timezone":"UTC",
    "admin":false
  },
  "start":0,
  "size":101
}

Response:
{
  "data":{
    "num_found":-1,
    "start":0,
    "size":1,
    "results":[
      {
        "color_label":0,
        "id":"110458",
        "folder_id":"default0/INBOX",
        "attachment":false,
        "from":[
          [
            "John Doe",
            "john.doe@example.com"
          ]
        ],
        "to":[
          [
            "Jane Doe",
            "jane.doe@example.com"
          ]
        ],
        "cc":[

        ],
        "subject":"Lorem Ipsum",
        "size":7501,
        "received_date":1408531387000,
        "flags":32,
        "priority":3,
        "account_name":"E-Mail",
        "account_id":0
      }
    ]
  }
}

Available Options

Every request body may contain an "options" object to finetune some specific behavior. Currently possible options are:

timezone: <tz-name> - The timezone to use if any dates are returned.
admin: <boolean> - true to include the context admin if it matches any search criteria. If the context admin shall always be ignored (i.e. not returned), false has to be set.

Possible Flags

Every facet may carry one or more flags that describe further aspects of that facet. Currently possible flags are:

conflicts - Specified in the form of "conflicts:<other-id>". A facet carrying this flag must not be combined with a facet of type <other-id>.

Module "share/management" (preliminary, available with v7.8.0)

Existing shares can be accessed via different actions in the "share/management" module.

Get all shares

GET /ajax/share/management?action=all

Parameters:

session – A session ID previously obtained from the login module.
module – (optional) The module identifier to list all shares for.

Response with timestamp: An array with share data. Each array element is a JSON object as described Share Info.

Share Info
Name	Type	Value
share_url	String	The URL to access the share.
token	String	The (fully qualified) token of the share target.
authentication	String	The authentication type used to access the share, one of guest_password, anonymous or anonymous_password.
created	Time	The time the share was created.
created_by	Number	The identifier of the user who created the share.
last_modified	Time	The time the share was last modified.
modified_by	Time	The identifier of the user who modified the share.
target	Object	The share target as described in Share Target
recipient	Object	Information about the recipient of the share, i.e. the guest user, as described in Share Recipient

Share Target
Name	Type	Value
module	String	The folder's module name, i.e. one of "tasks", "calendar", "contacts", "infostore"
folder	String	The folder identifier
item	String	(Optional) The object identifier, in case the share targets a single item
expiry_date	Time	(Optional) The end date / expiration time after which the share link is no longer accessible. Must be given in milliseconds after 01-01-1970 in the users time zone or the time zone contained as URL parameter
meta	JSON	Stores arbitrary JSON data as specified by client.

Share Recipient
Name	Type	Value
type	String	The recipient type, one of guest or anonymous.
base_token	String	The base token associated with the guest user.
password	String	The password to access the share, in case the used authentication mode is anonymous_password.
email_address	String	The email address of the named guest user, in case the recipient type is guest.
entity	Number	The identifier of the underlying guest user entity.

Get a share

GET /ajax/share/management?action=get

Parameters:

session – A session ID previously obtained from the login module.
token – The (fully qualified) token of the share.

Response with timestamp: A JSON object as described in Share Info.

Delete shares

PUT /ajax/share/management?action=delete

Parameters:

session – A session ID previously obtained from the login module.

Request body: An array containing the tokens of the shares to delete.

Response with timestamp: An empty JSON result in case of no errors.

Get a link

PUT /ajax/share/management?action=getLink

Parameters:

session – A session ID previously obtained from the login module.

Request body: A JSON object describing the shares to be created as described in Get a link. It contains an array holding the share "targets" as well as some properties of the guest user to be created.

Response with timestamp: Basic information about the created share as described in GetALinkResponse.

Get a link
Name	Type	Value
targets	Array	An array of objects as described in Share Target
bits	Number	(Optional) A number as described in Permission flags. For single items, the bits for reading, writing and deleting objects in folders are taken into account. At least one of those must grant permissions to all objects, not only own ones. The highest value will be chosen based on the following sequence: delete all > write all > read all. If not set, only read permissions are granted.
password	String	(Optional) An additional secret / pin number an anonymous user needs to enter when accessing the share

Get a link response
Name	Type	Value
url	String	The link to the share
token	String	The share token as a reference for consecutive requests

Update a link

PUT /ajax/share/management?action=updateLink

Parameters:

session – A session ID previously obtained from the login module.
timestamp – The last modified timestamp of the share to be updated. Used to detect concurrent modifications.

Request body: A JSON object describing the share to be updated as described in UpdateALink.

Response with timestamp: An empty JSON result in case of no errors.

Update a link
Name	Type	Value
token	String	The token of the share to update
expiry_date	Time	(Optional) The end date / expiration time after which the share link is no longer accessible. Must be given in milliseconds after 01-01-1970 in the users time zone or the time zone contained as URL parameter.
password	String	(Optional) An additional secret / pin number an anonymous user needs to enter when accessing the share
bits	Number	(Optional) A number as described in Permission flags. For single items, the bits for reading, writing and deleting objects in folders are taken into account. At least one of those must grant permissions to all objects, not only own ones. The highest value will be chosen based on the following sequence: delete all > write all > read all. If not set, only read permissions are granted.
meta	JSON	Stores arbitrary JSON data as specified by client

Delete a link

GET /ajax/share/management?action=deleteLink

Parameters:

session – A session ID previously obtained from the login module.
token – The token of the share to delete.

Response with timestamp: An empty JSON result in case of no errors.

Invite

PUT /ajax/share/management?action=invite

Parameters:

session – A session ID previously obtained from the login module.

Request body: A JSON object representing the shares to be created as described in Invite Data.

Response with timestamp: An array of share tokens for all created external recipients. The tokens are in the same order as the recipients in the request array. For internal users and groups a NULL value is set in the array.

Invite data
Name	Type	Value
targets	Array	An array of objects as described in Share Target
recipients	Array	An array of objects as described in Invited Recipient
message	String	(Optional) A custom message that will be contained in the notification mails for guests with mail addresses and password.

Invited recipient
Name	Type	Value
type	String	The recipient type, i.e. one of "user", "group", "guest", "anonymous"
bits	Number	A number as described in Permission flags. For single items, the bits for reading, writing and deleting objects in folders are taken into account. At least one of those must grant permissions to all objects, not only own ones. The highest value will be chosen based on the following sequence: delete all > write all > read all.
entity	Number	(for type "user" or "group") The user or group identifier of the recipient
password	String	(for type "anonymous", optional) An additional secret / pin number an anonymous user needs to enter when accessing the share
email_address	String	(for type "guest") The e-mail address of the recipient
display_name	String	(for type "guest", optional) The display name of the recipient
contact_id	String	(for type "guest", optional) The object identifier of the corresponding contact entry if the recipient was chosen from the address book
contact_folder	String	(for type "guest", required if "contact_id" is set) The folder identifier of the corresponding contact entry if the recipient was chosen from the address book

Module "drive"

The module drive is used to synchronize files and folders between server and client, using a server-centric approach to allow an easy implementation on the client-side.

A detailed description can be found in a sepearet article: OX Drive API.

Module "passwordchange"

Users can change their password via the "passwordchange" module.

Update password

Note: The new password will be set without any checks. The client must ensure that it is the password the user wants to set.

PUT /ajax/passwordchange?action=update

Parameters:

session – A session ID previously obtained from the login module.

Request body: A JSON object as described in PasswordChange.

Response: An empty JSON result in case of no errors.

Password change
Name	Type	Value
old_password	String	The users' current password
new_password	String	The new password the user wants to set

@@ Line 285: / Line 285: @@
 * <code>clientIP</code> (optional) – IP address of the client host for that the session is created. If this parameter is not specified the IP address of the HTTP client doing this request is used. Currently the IP address may change when using the session with both tokens. This can be disabled in future releases for security considerations.
 * <code>clientUserAgent</code> (optional) – Value of the User-Agent header of the client host for that the session is created. If this parameter is not specified the User-Agent of the current HTTP client doing this request is used. Currently the User-Agent may change when using the session. This can be disabled in future releases for security considerations.
+* <code>jsonResponse</code> (optional, since 7.8.0) – true or false (default). Defines the returned data type as JSON. Default 'false' will return a redirect.
-Response: A redirect to the web UI. The URL of the web UI is either taken from the given parameter or from the configured default of the backend. This redirect will only contain the server side token. The client side token sent in the request must be appended by the client creating the session. The final URL must have the form <code style="white-space: nowrap"><var>redirect_URL</var>&amp;clientToken=<var>token</var></code>. Both tokens are necessary to use the session and both tokens must match. Otherwise the session is terminated.
+Response: A redirect to the web UI (or JSON including the redirect url in case jsonResponse=true is set). The URL of the web UI is either taken from the given parameter or from the configured default of the backend. This redirect will only contain the server side token. The client side token sent in the request must be appended by the client creating the session. The final URL must have the form <code style="white-space: nowrap"><var>redirect_URL</var>&amp;clientToken=<var>token</var></code>. Both tokens are necessary to use the session and both tokens must match. Otherwise the session is terminated.
 === Tokens (since 7.0.1) ===

Anonymous

Search

HTTP API: Difference between revisions

Revision as of 08:45, 15 July 2015

Introduction

Low level protocol

Error handling

Date and time

Updates

Editing

File uploads

Documentation conventions

Common object data

Module "login"

Login

Form Login (since 6.20)

Token Login (since 7.0.1)

Tokens (since 7.0.1)

Logout

Refresh secret cookie (since 6.18.2)

Refresh auto-login cookie

Redirect

Change IP

Redeem Token (since 7.4.0)

Module "config"

Get configuration data

Set configuration data

Get a property (since 7.6.2)

Set a property (since 7.6.2)

Module "folders"

Special System Folders

Get root folders

Get subfolders

Get path

Get updated folders

Get a folder

Update a folder

Create a folder

Delete folders

Clearing a folder's content

Get all visible folder of a certain module (since v6.18.2)

Get shared folders (Since 7.8.0, Preliminary)

Module "tasks"

Get all tasks

Get a list of tasks

Get updated tasks

Get a task

Update a task

Create a task

Delete task

Delete tasks (since v6.22)

Confirm task

Search for tasks

Module "contacts"

Get all contacts

Get a list of contacts

Get a list of users

Get updated contacts

Get a contact

Get contact by user ID

Update a contact

Create a contact

Delete a contact

Delete contacts (since v6.22)

Search contacts

Search contacts by filter (since 6.20)

Search contacts by anniversary (Since 6.22.1, Preliminary)

Search contacts by birthday (Since 6.22.1, Preliminary)

Auto-complete contacts (Since 7.6.1, Preliminary)

Module "calendar"

Get all appointments

Get appointment information

Get a list of appointments

Get updated appointments

Get an appointment

Update an appointment

Create an appointment

Delete an appointment

Delete appointments (since v6.22)

Confirm appointment