AppSuite:UpdatingOXPackages: Difference between revisions

From Open-Xchange
No edit summary
No edit summary
 
(47 intermediate revisions by 8 users not shown)
Line 8: Line 8:
* If you are '''updating a cluster, please do it one node after the other'''. Turn the node off, update, turn it on again, make sure it works in the cluster. Have a look here, too: [[Running_a_cluster#Upgrading_a_single_Node|Upgrading a single node]]
* If you are '''updating a cluster, please do it one node after the other'''. Turn the node off, update, turn it on again, make sure it works in the cluster. Have a look here, too: [[Running_a_cluster#Upgrading_a_single_Node|Upgrading a single node]]
* If you don't have a cluster of OX nodes, then your complete installation needs to be taken down temporarily.
* If you don't have a cluster of OX nodes, then your complete installation needs to be taken down temporarily.
* Please '''update the frontend before the backend'''. Otherwise the old frontend won't work with the new backend and it's manifests.
* Please '''update the backend before the frontend'''.
* Please '''do not restart Open-Xchange during the database update'''. A database update can happen after installing minor or major updates. As soon as the first user tries to log in to the system or if any provisioning action is done, this update starts.
* Please '''do not restart Open-Xchange during the database update'''. A database update can happen after installing minor or major updates. As soon as the first user tries to log in to the system or if any provisioning action is done, this update starts.
<!-- === Upgrading to 7.10.0 ===
* OX App Suite v7.10.0 introduces significant changes regarding the underlying MySQL database system that require special attention in case of upgrades from former versions. Please read [[AppSuite:7_10_Database_Migration]] carefully to familiarize with the details, implications and our proposed upgrade path.
* v7.10.0 also requires OpenJDK 8. To update or install v7.10.0 on Debian Jessie, follow [[AppSuite:Open-Xchange_Installation_Guide_for_Debian_8.0#Debian_Jessie_backports_repository_for_OpenJDK_8_.28only_for_AppSuite_7.10.0.29|these instructions]]. -->


== How to get updates? ==
== How to get updates? ==


OX App Suite updates can be accessed by customers with a valid license.
OX App Suite updates can be accessed by customers with a valid license.
Have a look at the article:
[http://sdb.open-xchange.com/node/65 How to create an OXAccount and unlock Keys within the License Database]
for more information about how to create an account in the [http://ldb.open-xchange.com LDB].


In addition, you need to configure the [[OXReportClient]].
In addition, you need to configure the [[OXReportClient]].
Line 28: Line 29:
A new service pack usually introduces new packages and requires configuration changes. To get all required new packages and configuration changes, the following '''must''' be done when installing updates.
A new service pack usually introduces new packages and requires configuration changes. To get all required new packages and configuration changes, the following '''must''' be done when installing updates.


(Please, keep the [[#Warning|warning about frontend updates before backend updates]] in mind)
(Please, keep the [[#Warning|warning about backend updates before frontend updates]] in mind)


=== On Debian based distributions ===
=== On Debian based distributions ===
<!-- ==== Debian Stretch ====
Add the following entry to <tt>/etc/apt/sources.list.d/open-xchange.list</tt>
deb http://CUSTOMERID:PASSWORD@software.open-xchange.com/products/appsuite/stable/appsuiteui/updates/DebianStretch/ /
deb http://CUSTOMERID:PASSWORD@software.open-xchange.com/products/appsuite/stable/backend/updates/DebianStretch /
Then run
$ apt-get update
$ apt-get dist-upgrade
Important: In case you are asked in the process if you would like to replace a configuration with the default delivered in the updated package please DO NOT replace but KEEP your existing configuration. In case something needs to be changed mandatorily this will be handled and modified by scripts which run after package installation automatically.
If you want to see, what apt-get is going to do without actually doing it, you can run:
$ apt-get dist-upgrade -s
After the new packages are installed, the open-xchange process needs a restart:
<pre>$ /etc/init.d/open-xchange restart</pre> -->
<!-- ==== Debian Buster ====
Add the following entry to <tt>/etc/apt/sources.list.d/open-xchange.list</tt>
deb http://CUSTOMERID:PASSWORD@software.open-xchange.com/products/appsuite/stable/appsuiteui/updates/DebianBuster/ /
deb http://CUSTOMERID:PASSWORD@software.open-xchange.com/products/appsuite/stable/backend/updates/DebianBuster /
Then run
$ apt-get update
$ apt-get dist-upgrade
Important: In case you are asked in the process if you would like to replace a configuration with the default delivered in the updated package please DO NOT replace but KEEP your existing configuration. In case something needs to be changed mandatorily this will be handled and modified by scripts which run after package installation automatically.
If you want to see, what apt-get is going to do without actually doing it, you can run:
$ apt-get dist-upgrade -s
After the new packages are installed, the open-xchange process needs a restart:
<pre>$ /etc/init.d/open-xchange restart</pre> -->
==== Debian Bullseye ====
Add the following entry to <tt>/etc/apt/sources.list.d/open-xchange.list</tt>
deb http://CUSTOMERID:PASSWORD@software.open-xchange.com/products/appsuite/stable/appsuiteui/updates/DebianBullseye/ /
deb http://CUSTOMERID:PASSWORD@software.open-xchange.com/products/appsuite/stable/backend/updates/DebianBullseye /
Then run
$ apt-get update
$ apt-get dist-upgrade
Important: In case you are asked in the process if you would like to replace a configuration with the default delivered in the updated package please DO NOT replace but KEEP your existing configuration. In case something needs to be changed mandatorily this will be handled and modified by scripts which run after package installation automatically.
If you want to see, what apt-get is going to do without actually doing it, you can run:
$ apt-get dist-upgrade -s
After the new packages are installed, the open-xchange process needs a restart:
<pre>$ /etc/init.d/open-xchange restart</pre>
==== Debian Bookworm ====


Add the following entry to <tt>/etc/apt/sources.list.d/open-xchange.list</tt>
Add the following entry to <tt>/etc/apt/sources.list.d/open-xchange.list</tt>


  deb http://LDBACCOUNT:LDBPASSWORD@software.open-xchange.com/products/appsuite/stable/appsuiteui/updates/DebianSqueeze/ /
  deb http://CUSTOMERID:PASSWORD@software.open-xchange.com/products/appsuite/stable/appsuiteui/updates/DebianBookworm/ /
  deb http://LDBACCOUNT:LDBPASSWORD@software.open-xchange.com/products/appsuite/stable/backend/updates/DebianSqueeze/ /
  deb http://CUSTOMERID:PASSWORD@software.open-xchange.com/products/appsuite/stable/backend/updates/DebianBookworm /


Then run
Then run
Line 41: Line 110:
  $ apt-get update
  $ apt-get update
  $ apt-get dist-upgrade
  $ apt-get dist-upgrade
Important: In case you are asked in the process if you would like to replace a configuration with the default delivered in the updated package please DO NOT replace but KEEP your existing configuration. In case something needs to be changed mandatorily this will be handled and modified by scripts which run after package installation automatically.


If you want to see, what apt-get is going to do without actually doing it, you can run:
If you want to see, what apt-get is going to do without actually doing it, you can run:
Line 52: Line 123:
=== On RPM based distributions ===
=== On RPM based distributions ===


==== RHEL6/CentOS6 ====
==== RHEL7/CentOS7 ====


Add the following entries to <tt>/etc/yum.repos.d/ox.repo</tt>:
Add the following entries to <tt>/etc/yum.repos.d/ox.repo</tt>:
Line 58: Line 129:
  [ox-updates-appsuiteui]
  [ox-updates-appsuiteui]
  name=Open-Xchange Updates
  name=Open-Xchange Updates
  baseurl=http://LDBACCOUNT:LDBPASSWORD@software.open-xchange.com/products/appsuite/stable/appsuiteui/updates/RHEL6/
  baseurl=http://CUSTOMERID:PASSWORD@software.open-xchange.com/products/appsuite/stable/appsuiteui/updates/RHEL7/
  gpgkey=http://software.open-xchange.com/oxbuildkey.pub
  gpgkey=http://software.open-xchange.com/oxbuildkey.pub
  enabled=1
  enabled=1
Line 66: Line 137:
  [ox-updates-backend]
  [ox-updates-backend]
  name=Open-Xchange Updates
  name=Open-Xchange Updates
  baseurl=http://LDBACCOUNT:LDBPASSWORD@software.open-xchange.com/products/appsuite/stable/backend/updates/RHEL6/
  baseurl=http://CUSTOMERID:PASSWORD@software.open-xchange.com/products/appsuite/stable/backend/updates/RHEL7/
  gpgkey=http://software.open-xchange.com/oxbuildkey.pub
  gpgkey=http://software.open-xchange.com/oxbuildkey.pub
  enabled=1
  enabled=1
Line 83: Line 154:
(Please, keep the [[#Warnings|warning about database updates]] in mind)
(Please, keep the [[#Warnings|warning about database updates]] in mind)


==== SLES11 ====
==== RHEL8 ====


Add the updates repository to the repository list:
Add the following entries to <tt>/etc/yum.repos.d/ox.repo</tt>:


  $ zypper ar http://LDBACCOUNT:LDBPASSWORD@software.open-xchange.com/products/appsuite/stable/appsuiteui/updates/SLES11/ OXAPPSUITEUIUPDATES
  [ox-updates-appsuiteui]
  $ zypper ar http://LDBACCOUNT:LDBPASSWORD@software.open-xchange.com/products/appsuite/stable/backend/updates/SLES11/ OXBACKENDUPDATES
name=Open-Xchange Updates
baseurl=http://CUSTOMERID:PASSWORD@software.open-xchange.com/products/appsuite/stable/appsuiteui/updates/RHEL8/
gpgkey=http://software.open-xchange.com/oxbuildkey.pub
enabled=1
gpgcheck=1
metadata_expire=0m
[ox-updates-backend]
name=Open-Xchange Updates
  baseurl=http://CUSTOMERID:PASSWORD@software.open-xchange.com/products/appsuite/stable/backend/updates/RHEL8/
gpgkey=http://software.open-xchange.com/oxbuildkey.pub
enabled=1
gpgcheck=1
metadata_expire=0m


and run
and run


  $ zypper dup -r OXAPPSUITEUIUPDATES
  $ dnf update
$ zypper dup -r OXBACKENDUPDATES


You might need to run
  $ dnf upgrade
 
  $ zypper ref
 
to update the repository metadata before running ''zypper up''.


After the new packages are installed, the open-xchange process needs a restart:
After the new packages are installed, the open-xchange process needs a restart:


  <pre>$ rcopen-xchange restart</pre>
  <pre>$ /etc/init.d/open-xchange restart</pre>
(Please, keep the [[#Warnings|warning about database updates]] in mind.
(Please, keep the [[#Warnings|warning about database updates]] in mind)


= Updating OX App Suite Packages for older versions =
= Updating OX App Suite Packages for older versions =
Line 117: Line 196:
=== On Debian based distributions ===
=== On Debian based distributions ===


If you want to update an older version of Open-Xchange App Suite to the latest maintenance release, add the following entry to <tt>/etc/apt/sources.list.d/open-xchange.list</tt>. Replace VERSION with the version you are using (e.g. 7.4.2, 7.6.0). See [[AppSuite:Version_Support_Committment]] for the currently supported versions. Also, make sure that your repository configuration points at the versioned base installation repositories (instead of using the <pre>stable</pre> symlink.)
If you want to update an older version of Open-Xchange App Suite to the latest maintenance release, add the following entry to <tt>/etc/apt/sources.list.d/open-xchange.list</tt>. Replace VERSION with the version you are using (e.g. 7.10.3). See [[AppSuite:Version_Support_Commitment]] for the currently supported versions. Also, make sure that your repository configuration points at the versioned base installation repositories (instead of using the <tt>stable</tt> symlink.)


  deb http://LDBACCOUNT:LDBPASSWORD@software.open-xchange.com/products/appsuite/VERSION/appsuiteui/updates/DebianSqueeze/ /
  deb http://CUSTOMERID:PASSWORD@software.open-xchange.com/products/appsuite/VERSION/appsuiteui/updates/DebianStretch/ /
  deb http://LDBACCOUNT:LDBPASSWORD@software.open-xchange.com/products/appsuite/VERSION/backend/updates/DebianSqueeze/ /
  deb http://CUSTOMERID:PASSWORD@software.open-xchange.com/products/appsuite/VERSION/backend/updates/DebianStretch /


Then run
Then run
Line 137: Line 216:
=== On RPM based distributions ===
=== On RPM based distributions ===


==== RHEL6/CentOS6 ====
<!-- ==== RHEL6/CentOS6 (valid until v7.10.3) ====
 
If you want to update an older version of Open-Xchange App Suite to the latest maintenance release, add the following entry to <tt>/etc/yum.repos.d/ox.repo</tt>. Replace VERSION with the version you are using (e.g. 7.10.3). See [[AppSuite:Version_Support_Committment]] for the currently supported versions. Also, make sure that your repository configuration points at the versioned base installation repositories (instead of using the <tt>stable</tt> symlink.)
 
[ox-updates-appsuiteui]
name=Open-Xchange Updates
baseurl=http://CUSTOMERID:PASSWORD@software.open-xchange.com/products/appsuite/VERSION/appsuiteui/updates/RHEL6/
gpgkey=http://software.open-xchange.com/oxbuildkey.pub
enabled=1
gpgcheck=1
metadata_expire=0m
[ox-updates-backend]
name=Open-Xchange Updates
baseurl=http://CUSTOMERID:PASSWORD@software.open-xchange.com/products/appsuite/VERSION/backend/updates/RHEL6/
gpgkey=http://software.open-xchange.com/oxbuildkey.pub
enabled=1
gpgcheck=1
metadata_expire=0m
 
and run
 
$ yum update


If you want to update an older version of Open-Xchange App Suite to the latest maintenance release, add the following entry to <tt>/etc/yum.repos.d/ox.repo</tt>. Replace VERSION with the version you are using (e.g. 7.4.2, 7.6.0). See [[AppSuite:Version_Support_Committment]] for the currently supported versions. Also, make sure that your repository configuration points at the versioned base installation repositories (instead of using the <pre>stable</pre> symlink.)
$ yum upgrade
 
After the new packages are installed, the open-xchange process needs a restart:
 
<pre>$ /etc/init.d/open-xchange restart</pre>
(Please, keep the [[#Warnings|warning about database updates]] in mind) -->
 
==== RHEL7/CentOS7 ====
 
If you want to update an older version of Open-Xchange App Suite to the latest maintenance release, add the following entry to <tt>/etc/yum.repos.d/ox.repo</tt>. Replace VERSION with the version you are using (e.g. 7.10.3). See [[AppSuite:Version_Support_Committment]] for the currently supported versions. Also, make sure that your repository configuration points at the versioned base installation repositories (instead of using the <tt>stable</tt> symlink.)


  [ox-updates-appsuiteui]
  [ox-updates-appsuiteui]
  name=Open-Xchange Updates
  name=Open-Xchange Updates
  baseurl=http://LDBACCOUNT:LDBPASSWORD@software.open-xchange.com/products/appsuite/VERSION/appsuiteui/updates/RHEL6/
  baseurl=http://CUSTOMERID:PASSWORD@software.open-xchange.com/products/appsuite/VERSION/appsuiteui/updates/RHEL7/
  gpgkey=http://software.open-xchange.com/oxbuildkey.pub
  gpgkey=http://software.open-xchange.com/oxbuildkey.pub
  enabled=1
  enabled=1
Line 151: Line 261:
  [ox-updates-backend]
  [ox-updates-backend]
  name=Open-Xchange Updates
  name=Open-Xchange Updates
  baseurl=http://LDBACCOUNT:LDBPASSWORD@software.open-xchange.com/products/appsuite/VERSION/backend/updates/RHEL6/
  baseurl=http://CUSTOMERID:PASSWORD@software.open-xchange.com/products/appsuite/VERSION/backend/updates/RHEL7/
  gpgkey=http://software.open-xchange.com/oxbuildkey.pub
  gpgkey=http://software.open-xchange.com/oxbuildkey.pub
  enabled=1
  enabled=1
Line 168: Line 278:
(Please, keep the [[#Warnings|warning about database updates]] in mind)
(Please, keep the [[#Warnings|warning about database updates]] in mind)


==== SLES11 ====
==== RHEL8====


If you want to update an older version of Open-Xchange App Suite to the latest maintenance release, add the following entry to the repository list. Replace VERSION with the version you are using (e.g. 7.4.2, 7.6.0). See [[AppSuite:Version_Support_Committment]] for the currently supported versions. Also, make sure that your repository configuration points at the versioned base installation repositories (instead of using the <pre>stable</pre> symlink.)
If you want to update an older version of Open-Xchange App Suite to the latest maintenance release, add the following entry to <tt>/etc/yum.repos.d/ox.repo</tt>. Replace VERSION with the version you are using (e.g. 7.10.3). See [[AppSuite:Version_Support_Committment]] for the currently supported versions. Also, make sure that your repository configuration points at the versioned base installation repositories (instead of using the <tt>stable</tt> symlink.)


  $ zypper ar http://LDBACCOUNT:LDBPASSWORD@software.open-xchange.com/products/appsuite/VERSION/appsuiteui/updates/SLES11/ OXAPPSUITEUIUPDATES
[ox-updates-appsuiteui]
  $ zypper ar http://LDBACCOUNT:LDBPASSWORD@software.open-xchange.com/products/appsuite/VERSION/backend/updates/SLES11/ OXBACKENDUPDATES
name=Open-Xchange Updates
baseurl=http://CUSTOMERID:PASSWORD@software.open-xchange.com/products/appsuite/VERSION/appsuiteui/updates/RHEL8/
gpgkey=http://software.open-xchange.com/oxbuildkey.pub
enabled=1
gpgcheck=1
metadata_expire=0m
[ox-updates-backend]
name=Open-Xchange Updates
baseurl=http://CUSTOMERID:PASSWORD@software.open-xchange.com/products/appsuite/VERSION/backend/updates/RHEL8/
gpgkey=http://software.open-xchange.com/oxbuildkey.pub
enabled=1
gpgcheck=1
metadata_expire=0m
 
and run
 
$ dnf update
 
$ dnf upgrade
 
After the new packages are installed, the open-xchange process needs a restart:
 
<pre>$ /etc/init.d/open-xchange restart</pre>
(Please, keep the [[#Warnings|warning about database updates]] in mind)
 
<!-- ==== SLES 12 (valid until v7.10.3) ====
 
If you want to update an older version of Open-Xchange App Suite to the latest maintenance release, add the following entry to the repository list. Replace VERSION with the version you are using (e.g. 7.10.3). See [[AppSuite:Version_Support_Committment]] for the currently supported versions. Also, make sure that your repository configuration points at the versioned base installation repositories (instead of using the <tt>stable</tt> symlink.)
 
  $ zypper ar http://CUSTOMERID:PASSWORD@software.open-xchange.com/products/appsuite/VERSION/appsuiteui/updates/SLE_12/ OXAPPSUITEUIUPDATES
  $ zypper ar http://CUSTOMERID:PASSWORD@software.open-xchange.com/products/appsuite/VERSION/backend/updates/SLE_12/ OXBACKENDUPDATES


and run
and run
Line 189: Line 330:


  <pre>$ rcopen-xchange restart</pre>
  <pre>$ rcopen-xchange restart</pre>
(Please, keep the [[#Warnings|warning about database updates]] in mind.
(Please, keep the [[#Warnings|warning about database updates]] in mind. -->
 
= Updating UI plugins =
 
If you update only UI plugins without simultaneously upgrading the core UI packages to a new version, you need to perform an additional step after the update to make the changes visible to users.
 
The package <tt>open-xchange-appsuite</tt> contains a timestamp which is different in each version. The JavaScript UI in every user's browser will reload all cached code and data whenever this value changes. Since this value does not change when updating only plugin packages, the value must be changed manually with the following command:
 
$ /opt/open-xchange/sbin/touch-appsuite --timestamp=20170101.123400
 
If you only have one OX node, the parameter <code>--timestamp</code> can be omitted. It defaults to the current UTC time anyway.
 
When updating a cluster, the command must use the same timestamp value on every node. Otherwise, browsers will clear their cache and re-download the entire UI code every time load balancer sends them to a different node (i.e. on almost every login). This is also why the timestamps can't be updated automatically: a node doesn't know which value other nodes will pick, which of them are part of the same update, etc.
 
The quickest way to obtain a value for the timestamp parameter is to run the command with the parameter <code>-h</code>. It will then print a help message with the current time as an example. For automation, you can use the output of
 
date -u +%Y%m%d.%H%M%S
 
Again: this value must be computed once, and then the same value must be used on every node in the cluster.
 
This step can be performed on each node separately after each node has been updated, or on all nodes at once after all nodes have been updated. If Apache has its own set of dedicated nodes, the <tt>touch-appsuite</tt> call must be performed on the web server nodes, after all corresponding <tt><plugin>-static</tt> packages have been updated.


[[Category: OX7]]
[[Category: OX7]]

Latest revision as of 09:32, 12 September 2024

Updating OX App Suite packages

Synopsys: This article describes how to update OX App Suite packages from one service pack to another.

Warnings

Before we begin, here are several things that you should keep in mind:

  • If you are updating a cluster, please do it one node after the other. Turn the node off, update, turn it on again, make sure it works in the cluster. Have a look here, too: Upgrading a single node
  • If you don't have a cluster of OX nodes, then your complete installation needs to be taken down temporarily.
  • Please update the backend before the frontend.
  • Please do not restart Open-Xchange during the database update. A database update can happen after installing minor or major updates. As soon as the first user tries to log in to the system or if any provisioning action is done, this update starts.


How to get updates?

OX App Suite updates can be accessed by customers with a valid license.

In addition, you need to configure the OXReportClient.

Updating OX App Suite Packages

Installing Updates

A new service pack usually introduces new packages and requires configuration changes. To get all required new packages and configuration changes, the following must be done when installing updates.

(Please, keep the warning about backend updates before frontend updates in mind)

On Debian based distributions

Debian Bullseye

Add the following entry to /etc/apt/sources.list.d/open-xchange.list

deb http://CUSTOMERID:PASSWORD@software.open-xchange.com/products/appsuite/stable/appsuiteui/updates/DebianBullseye/ /
deb http://CUSTOMERID:PASSWORD@software.open-xchange.com/products/appsuite/stable/backend/updates/DebianBullseye /

Then run

$ apt-get update
$ apt-get dist-upgrade

Important: In case you are asked in the process if you would like to replace a configuration with the default delivered in the updated package please DO NOT replace but KEEP your existing configuration. In case something needs to be changed mandatorily this will be handled and modified by scripts which run after package installation automatically.

If you want to see, what apt-get is going to do without actually doing it, you can run:

$ apt-get dist-upgrade -s

After the new packages are installed, the open-xchange process needs a restart:

$ /etc/init.d/open-xchange restart

Debian Bookworm

Add the following entry to /etc/apt/sources.list.d/open-xchange.list

deb http://CUSTOMERID:PASSWORD@software.open-xchange.com/products/appsuite/stable/appsuiteui/updates/DebianBookworm/ /
deb http://CUSTOMERID:PASSWORD@software.open-xchange.com/products/appsuite/stable/backend/updates/DebianBookworm /

Then run

$ apt-get update
$ apt-get dist-upgrade

Important: In case you are asked in the process if you would like to replace a configuration with the default delivered in the updated package please DO NOT replace but KEEP your existing configuration. In case something needs to be changed mandatorily this will be handled and modified by scripts which run after package installation automatically.

If you want to see, what apt-get is going to do without actually doing it, you can run:

$ apt-get dist-upgrade -s

After the new packages are installed, the open-xchange process needs a restart:

$ /etc/init.d/open-xchange restart

On RPM based distributions

RHEL7/CentOS7

Add the following entries to /etc/yum.repos.d/ox.repo:

[ox-updates-appsuiteui]
name=Open-Xchange Updates
baseurl=http://CUSTOMERID:PASSWORD@software.open-xchange.com/products/appsuite/stable/appsuiteui/updates/RHEL7/
gpgkey=http://software.open-xchange.com/oxbuildkey.pub
enabled=1
gpgcheck=1
metadata_expire=0m

[ox-updates-backend]
name=Open-Xchange Updates
baseurl=http://CUSTOMERID:PASSWORD@software.open-xchange.com/products/appsuite/stable/backend/updates/RHEL7/
gpgkey=http://software.open-xchange.com/oxbuildkey.pub
enabled=1
gpgcheck=1
metadata_expire=0m

and run

$ yum update
$ yum upgrade

After the new packages are installed, the open-xchange process needs a restart:

$ /etc/init.d/open-xchange restart

(Please, keep the warning about database updates in mind)

RHEL8

Add the following entries to /etc/yum.repos.d/ox.repo:

[ox-updates-appsuiteui]
name=Open-Xchange Updates
baseurl=http://CUSTOMERID:PASSWORD@software.open-xchange.com/products/appsuite/stable/appsuiteui/updates/RHEL8/
gpgkey=http://software.open-xchange.com/oxbuildkey.pub
enabled=1
gpgcheck=1
metadata_expire=0m

[ox-updates-backend]
name=Open-Xchange Updates
baseurl=http://CUSTOMERID:PASSWORD@software.open-xchange.com/products/appsuite/stable/backend/updates/RHEL8/
gpgkey=http://software.open-xchange.com/oxbuildkey.pub
enabled=1
gpgcheck=1
metadata_expire=0m

and run

$ dnf update
$ dnf upgrade

After the new packages are installed, the open-xchange process needs a restart:

$ /etc/init.d/open-xchange restart

(Please, keep the warning about database updates in mind)

Updating OX App Suite Packages for older versions

Installing Updates

A new service pack usually introduces new packages and requires configuration changes. To get all required new packages and configuration changes, the following must be done when installing updates.

(Please, keep the warning about frontend updates before backend updates in mind)

On Debian based distributions

If you want to update an older version of Open-Xchange App Suite to the latest maintenance release, add the following entry to /etc/apt/sources.list.d/open-xchange.list. Replace VERSION with the version you are using (e.g. 7.10.3). See AppSuite:Version_Support_Commitment for the currently supported versions. Also, make sure that your repository configuration points at the versioned base installation repositories (instead of using the stable symlink.)

deb http://CUSTOMERID:PASSWORD@software.open-xchange.com/products/appsuite/VERSION/appsuiteui/updates/DebianStretch/ /
deb http://CUSTOMERID:PASSWORD@software.open-xchange.com/products/appsuite/VERSION/backend/updates/DebianStretch /

Then run

$ apt-get update
$ apt-get dist-upgrade

If you want to see, what apt-get is going to do without actually doing it, you can run:

$ apt-get dist-upgrade -s

After the new packages are installed, the open-xchange process needs a restart:

$ /etc/init.d/open-xchange restart

On RPM based distributions

RHEL7/CentOS7

If you want to update an older version of Open-Xchange App Suite to the latest maintenance release, add the following entry to /etc/yum.repos.d/ox.repo. Replace VERSION with the version you are using (e.g. 7.10.3). See AppSuite:Version_Support_Committment for the currently supported versions. Also, make sure that your repository configuration points at the versioned base installation repositories (instead of using the stable symlink.)

[ox-updates-appsuiteui]
name=Open-Xchange Updates
baseurl=http://CUSTOMERID:PASSWORD@software.open-xchange.com/products/appsuite/VERSION/appsuiteui/updates/RHEL7/
gpgkey=http://software.open-xchange.com/oxbuildkey.pub
enabled=1
gpgcheck=1
metadata_expire=0m

[ox-updates-backend]
name=Open-Xchange Updates
baseurl=http://CUSTOMERID:PASSWORD@software.open-xchange.com/products/appsuite/VERSION/backend/updates/RHEL7/
gpgkey=http://software.open-xchange.com/oxbuildkey.pub
enabled=1
gpgcheck=1
metadata_expire=0m

and run

$ yum update
$ yum upgrade

After the new packages are installed, the open-xchange process needs a restart:

$ /etc/init.d/open-xchange restart

(Please, keep the warning about database updates in mind)

RHEL8

If you want to update an older version of Open-Xchange App Suite to the latest maintenance release, add the following entry to /etc/yum.repos.d/ox.repo. Replace VERSION with the version you are using (e.g. 7.10.3). See AppSuite:Version_Support_Committment for the currently supported versions. Also, make sure that your repository configuration points at the versioned base installation repositories (instead of using the stable symlink.)

[ox-updates-appsuiteui]
name=Open-Xchange Updates
baseurl=http://CUSTOMERID:PASSWORD@software.open-xchange.com/products/appsuite/VERSION/appsuiteui/updates/RHEL8/
gpgkey=http://software.open-xchange.com/oxbuildkey.pub
enabled=1
gpgcheck=1
metadata_expire=0m

[ox-updates-backend]
name=Open-Xchange Updates
baseurl=http://CUSTOMERID:PASSWORD@software.open-xchange.com/products/appsuite/VERSION/backend/updates/RHEL8/
gpgkey=http://software.open-xchange.com/oxbuildkey.pub
enabled=1
gpgcheck=1
metadata_expire=0m

and run

$ dnf update
$ dnf upgrade

After the new packages are installed, the open-xchange process needs a restart:

$ /etc/init.d/open-xchange restart

(Please, keep the warning about database updates in mind)


Updating UI plugins

If you update only UI plugins without simultaneously upgrading the core UI packages to a new version, you need to perform an additional step after the update to make the changes visible to users.

The package open-xchange-appsuite contains a timestamp which is different in each version. The JavaScript UI in every user's browser will reload all cached code and data whenever this value changes. Since this value does not change when updating only plugin packages, the value must be changed manually with the following command:

$ /opt/open-xchange/sbin/touch-appsuite --timestamp=20170101.123400

If you only have one OX node, the parameter --timestamp can be omitted. It defaults to the current UTC time anyway.

When updating a cluster, the command must use the same timestamp value on every node. Otherwise, browsers will clear their cache and re-download the entire UI code every time load balancer sends them to a different node (i.e. on almost every login). This is also why the timestamps can't be updated automatically: a node doesn't know which value other nodes will pick, which of them are part of the same update, etc.

The quickest way to obtain a value for the timestamp parameter is to run the command with the parameter -h. It will then print a help message with the current time as an example. For automation, you can use the output of

date -u +%Y%m%d.%H%M%S

Again: this value must be computed once, and then the same value must be used on every node in the cluster.

This step can be performed on each node separately after each node has been updated, or on all nodes at once after all nodes have been updated. If Apache has its own set of dedicated nodes, the touch-appsuite call must be performed on the web server nodes, after all corresponding <plugin>-static packages have been updated.