ChangePasswordExternal

Revision as of 12:53, 1 October 2014 by Cutmasta (talk | contribs) (Enable the password change dialog within the AppSuite Frontend)

Introduction

The package open-xchange-passwordchange-script allows you to run a command to change a password in an external subsystem like e.g. LDAP.

Installation

Install on OX AppSuite

Debian GNU/Linux 8.0

Add the following entry to /etc/apt/sources.list.d/open-xchange.list if not already present:

deb https://software.open-xchange.com/OX6/stable/DebianJessie/ /
# if you have a valid maintenance subscription, please uncomment the 
# following and add the ldb account data to the url so that the most recent
# packages get installed
# deb https://[CUSTOMERID:PASSWORD]@software.open-xchange.com/OX6/stable/updates/DebianJessie/ /

and run

$ apt-get update
$ apt-get install open-xchange-passwordchange-script

Debian GNU/Linux 9.0

Add the following entry to /etc/apt/sources.list.d/open-xchange.list if not already present:

deb https://software.open-xchange.com/OX6/stable/DebianStretch/ /
# if you have a valid maintenance subscription, please uncomment the 
# following and add the ldb account data to the url so that the most recent
# packages get installed
# deb https://[CUSTOMERID:PASSWORD]@software.open-xchange.com/OX6/stable/updates/DebianStretch/ /

and run

$ apt-get update
$ apt-get install open-xchange-passwordchange-script

SUSE Linux Enterprise Server 12

Add the package repository using zypper if not already present:

$ zypper ar https://software.open-xchange.com/OX6/stable/SLE_12 ox

If you have a valid maintenance subscription, please run the following command and add the ldb account data to the url so that the most recent packages get installed:

$ zypper ar https://[CUSTOMERID:PASSWORD]@software.open-xchange.com/OX6/stable/updates/SLES11 ox-updates

and run

$ zypper ref
$ zypper in open-xchange-passwordchange-script

RedHat Enterprise Linux 6

Start a console and create a software repository file if not already present:

$ vim /etc/yum.repos.d/ox.repo

[ox]
name=Open-Xchange
baseurl=https://software.open-xchange.com/OX6/stable/RHEL6/
gpgkey=https://software.open-xchange.com/oxbuildkey.pub
enabled=1
gpgcheck=1
metadata_expire=0m
# if you have a valid maintenance subscription, please uncomment the 
# following and add the ldb account data to the url so that the most recent
# packages get installed
# [ox-updates]
# name=Open-Xchange Updates
# baseurl=https://[CUSTOMERID:PASSWORD]@software.open-xchange.com/OX6/stable/updates/RHEL6/
# gpgkey=https://software.open-xchange.com/oxbuildkey.pub
# enabled=1
# gpgcheck=1
# metadata_expire=0m

and run

$ yum update
$ yum install open-xchange-passwordchange-script

RedHat Enterprise Linux 7

Start a console and create a software repository file if not already present:

$ vim /etc/yum.repos.d/ox.repo

[ox]
name=Open-Xchange
baseurl=https://software.open-xchange.com/OX6/stable/RHEL7/
gpgkey=https://software.open-xchange.com/oxbuildkey.pub
enabled=1
gpgcheck=1
metadata_expire=0m
# if you have a valid maintenance subscription, please uncomment the 
# following and add the ldb account data to the url so that the most recent
# packages get installed
# [ox-updates]
# name=Open-Xchange Updates
# baseurl=https://[CUSTOMERID:PASSWORD]@software.open-xchange.com/OX6/stable/updates/RHEL7/
# gpgkey=https://software.open-xchange.com/oxbuildkey.pub
# enabled=1
# gpgcheck=1
# metadata_expire=0m

and run

$ yum update
$ yum install open-xchange-passwordchange-script

CentOS 6

Start a console and create a software repository file if not already present:

$ vim /etc/yum.repos.d/ox.repo

[ox]
name=Open-Xchange
baseurl=https://software.open-xchange.com/OX6/stable/RHEL6/
gpgkey=https://software.open-xchange.com/oxbuildkey.pub
enabled=1
gpgcheck=1
metadata_expire=0m
# if you have a valid maintenance subscription, please uncomment the 
# following and add the ldb account data to the url so that the most recent
# packages get installed
# [ox-updates]
# name=Open-Xchange Updates
# baseurl=https://[CUSTOMERID:PASSWORD]@software.open-xchange.com/OX6/stable/updates/RHEL6/
# gpgkey=https://software.open-xchange.com/oxbuildkey.pub
# enabled=1
# gpgcheck=1
# metadata_expire=0m

and run

$ yum update
$ yum install open-xchange-passwordchange-script

CentOS 7

Start a console and create a software repository file if not already present:

$ vim /etc/yum.repos.d/ox.repo

[ox]
name=Open-Xchange
baseurl=https://software.open-xchange.com/OX6/stable/RHEL7/
gpgkey=https://software.open-xchange.com/oxbuildkey.pub
enabled=1
gpgcheck=1
metadata_expire=0m
# if you have a valid maintenance subscription, please uncomment the 
# following and add the ldb account data to the url so that the most recent
# packages get installed
# [ox-updates]
# name=Open-Xchange Updates
# baseurl=https://[CUSTOMERID:PASSWORD]@software.open-xchange.com/OX6/stable/updates/RHEL7/
# gpgkey=https://software.open-xchange.com/oxbuildkey.pub
# enabled=1
# gpgcheck=1
# metadata_expire=0m

and run

$ yum update
$ yum install open-xchange-passwordchange-script

Enable the password change dialog within the AppSuite Frontend

After the installation of the package, you must explicitly enable the password change dialog for each AppSuite user. The simplest option to do this, is executing the following command:

/opt/open-xchange/sbin/changeuser -c <_context_id_> -u <_user_name_> --access-edit-password on

You can also use all other AppSuite provisioning interfaces like JAVA RMI or SOAP. Please review the corresponding documentation for each interface for details.

Screenshot of the password change dialog within AppSuite -> Settings -> Basic Settings -> Password

Example

In /opt/open-xchange/etc/change_pwd_script.properties add this line:

com.openexchange.passwordchange.script.shellscript=/bin/pwchange.pl

Example Script 1

This example script calls saslpasswd to change the password in the sasldb:

#! /usr/bin/perl -w -T
#
# perlsec(1) for security related perl programming
#
use Getopt::Long;
use strict;

my $user;
my $pw;
my $result;
my $cid;
my $oldpassword;
my $userid;

open(LOG, '>>/var/log/pw.log'); 

sub log_error {
       my $errorstring=$_[0];
       print LOG "Error: $errorstring\n";
       die "$errorstring";
}
# secure env
$ENV{'PATH'} = "";
$ENV{'ENV'} = "";

$result = GetOptions ("username=s" => \$user,
                     "cid" => \$cid,
                     "userid" => \$userid,
                     "oldpassword" => \$oldpassword,
                     "newpassword=s" => \$pw);

$user || &log_error("missing parameter username");
print LOG "changing password for user $user\n";
$pw || &log_error("missing parameter newpassword");

my $usersav = $user;

# add a taint check
if ($user =~ /^([-\@\w.]+)$/) {
 $user = $1;                     # $data now untainted
} else {
 &log_error("Bad data in '$user'");
}

die "Can't fork: $!" unless defined(my $pid = open(KID, "|-"));
if ($pid) {           # parent
 print KID $pw;
 close KID;
} else {
 exec '/usr/bin/sudo', '/usr/sbin/saslpasswd2', '-p', "$user"
   or &log_error("can't exec myprog: $!");
}
close(LOG);

Example Script 2

The following script uses ldappasswd to change the password in an LDAP server.

#!/bin/bash
ldappasswd -h my_ldap_server -D "uid=$4,ou=people,dc=example,dc=com" -w $8 \
   -s ${10} "uid=$4,ou=people,dc=example,dc=com"

Example Script 3

The following script uses open-xchange-passwordchange-script data to change the password within LDAP

#!/usr/bin/perl -w     
# Begin LDAP Stuff
       use Net::LDAP;
       use Net::LDAP::Extension::SetPassword;
my $cid = $ARGV[1];
my $userid = $ARGV[5];
my $oldpw = $ARGV[7];
my $hostname= 'localhost';
my $rootdn= 'cn=Administrator,dc=example,dc=com';
my $userbind= 'ou=People,dc=example,dc=com';
my $adminpasswd='system';
my $name= $ARGV[3];
my $newpasswd= $ARGV[9];
my $ldap = Net::LDAP->new("$hostname")
or die "Host not found: $!";

open(LOG, '>>/var/log/open-xchange/pw.log');  
 
sub log_error {
      my $errorstring=$_[0];
      print LOG "Error: $errorstring\n";
      die "$errorstring";
}
 
$name || &log_error("missing parameter username");
print LOG "changing password for $ARGV[2]: $name with $ARGV[0]: $cid and $ARGV[4]: $userid\n";
$newpasswd || &log_error("missing parameter newpassword");
 
 $ldap->bind( "$rootdn", password => "$adminpasswd" );

my $mesg = $ldap->set_password(
   newpasswd => "$newpasswd",
   user      => "uid=$name,$userbind"
   );
 
  die "error: ", $mesg->code(), ": ", $mesg->error() if ( $mesg->code() );
  close(LOG);